Your Browsing History
- Free 30-day Returns
$43.99
Meet Your Seller
Mcbazel Surecom 0014-0155 PL259 Male Plug DC to 1.0GHz 60W Watt 50 Ohm Dummy Load
- PL259 Male Plug DC to 1GHz 60W Watt Dummy Load 50 Ohm Dummy Load
- Max input power: 60 Watt. Frequency Range: DC to 1GHz.
- Connector: PL259. Impedance: 50ohm.
- Size: 45 x 72 mm (NOT include plug)
+
+
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Description:
PL259 Male Plug DC to 1GHz 60 Watt Dummy Load 50 Ohm Dummy Load
Max input power: 60 Watt
Frequency Range: DC to 1GHz
Connector: PL259
Impedance: 50ohm
Size: 45 x 72 mm (NOT include plug)
Warning:
When the input power is higher than the dummy provides, it will cause the damage of the product
Why use the dummy load?
A Dummy Load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves.
The Dummy Load is selected in a way so that it has a similar impedance to the real device that will be connected to the RF System. Not using a dummy load and leaving the port open, can result in some unwanted reflections which can damage the RF System. Also, using a real antenna in the testing phase can result in some unwanted transmission in the lab which will interfere with other devices and technologies being tested.
Packing Includes:
1 x 60W DC-1GHz 50ohm Dummy Load
PL259 Male Plug DC to 1GHz 60 Watt Dummy Load 50 Ohm Dummy Load
Max input power: 60 Watt
Frequency Range: DC to 1GHz
Connector: PL259
Impedance: 50ohm
Size: 45 x 72 mm (NOT include plug)
Warning:
When the input power is higher than the dummy provides, it will cause the damage of the product
Why use the dummy load?
A Dummy Load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves.
The Dummy Load is selected in a way so that it has a similar impedance to the real device that will be connected to the RF System. Not using a dummy load and leaving the port open, can result in some unwanted reflections which can damage the RF System. Also, using a real antenna in the testing phase can result in some unwanted transmission in the lab which will interfere with other devices and technologies being tested.
Packing Includes:
1 x 60W DC-1GHz 50ohm Dummy Load
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: non-replaceable
- This item is covered by JMDesign Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...