Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc.
The fins increase the area of the board and thus provide for greater heat transfer.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Anodized Black
Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H)
Weight: 5...