DIY Cooling

Limited time offer, ends 01/22

• Model #: C0FE-112413

• Model #: 27-Com-Cooler1991

• Model #: 355756715136

• Model #: 9391048873703

• Model #: 694782993867

• Model #: BP-TBWP-C42-4P

• Type: CPU Block
• Model #: RGV-LAN-O11MINI-P-K-NE

• Type: CPU Block
• Model #: B-TANK-DDC-MI-BK-NE

• Model #: TA-F42-GS-2

• Type: CPU Block
• Model #: FCMMRM-SW

• Model #: TA-F42-GB-2

• Model #: BP-MVVFRIGIG14-DWBK

• Type: CPU Block
• Model #: 6932167210975

• Type: Fittings
• Model #: BP-MVV-TBBK

• Type: CPU Block
• Model #: 6932167223975

• Type: CPU Block
• Model #: 6932167210401

• Type: CPU Block
• Model #: 6932167210944

• Type: CPU Block
• Model #: 6932167209870

Limited time offer, ends 01/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 01/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Model #: 1-Com-Cooler1202

• Type: Fittings
• Model #: BP-MVV-SLBK

• Type: Fittings
• Model #: BP-MVVFRIGIG14-MBKBK

• Type: Fittings
• Model #: BP-MVVFRGIG14-TBBK

• Type: CPU Block
• Model #: RGV-LAN-O11AIR-MINI-P-K

• Model #: BP-MBWP-C42-4P

• Model #: 1-CaseFans0493

• Model #: 1-CaseFans1060

• Type: Fittings
• Model #: BP-MVVFRGIG14-BSBK

• Model #: 1-CaseFans0685

• Model #: BP-MVVFRGIG14-SLBK

• Model #: 1-Com-Cooler1991

• Model #: BP-MVVFRGIG14-DWBK

• Model #: BPTA-WDPO11DS-P5D

• Type: CPU Block
• Color: Red
• Model #: B-DTJ-MI-R

• Model #: 1-CaseFans0798