DIY Cooling

• Model #: 1-CaseFans0105

• Model #: 1-Com-Cooler1175

• Model #: HT-ComCoolin000363

• Model #: 1-Water-Cooling1475

• Model #: 1-Water-Cooling0122

• Model #: 1-Water-Cooling0537

• Model #: 1-Com-Cooler1989

• Model #: 1-Com-Cooler0645

• Model #: 1-Com-Cooler2293

• Model #: 1-Water-Cooling0440

• Model #: 1-Com-Cooler1577

• Model #: 1-Com-Cooler2730

• Model #: 1-Com-Cooler1249

• Model #: 1-Water-Cooling1518

• Type: CPU Block
• Model #: GAMS

• Type: CPU Block
• Model #: GAIS

• Type: CPU Block
• Model #: CPU-RAY-MC-M

(36)

• Type: Radiator
• Radiator Size: 310mm x 140mm x 30mm
• Radiator Material: Copper / Brass
• Fan Size: 2 Fan Slots (140 mm)
• Model #: CX-9031002-WW

Limited time offer, ends 01/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset,graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20mm x 20mm x 6mm low profile Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 20x 20x 6mm/ 0.8" x 0.8" x 0.23" (L*W*H) Weight: 25g Package Content: 10pcs x Heatsink
• Dimensions: 20x 20x 6mm
• Model #: 11-001-324

Limited time offer, ends 01/31

• Model #: 11-001-013

Limited time offer, ends 01/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 01/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.5mm
• Dimensions: 20mm x 20mm x 0.5mm
• Model #: 11-001-270

Limited time offer, ends 01/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
• Dimensions: 20mm x 20mm x 0.8mm
• Model #: 11-001-271

• Model #: 3/8 BK

• Type: CPU Block
• Model #: PC-ICE2-UP

off w/ promo code PHAKF57, limited offer

• Type: CPU block
• Block Compatibility: Intel: LGA 1700 AMD: AM4 / AM5
• Specification: LED Type: Digital-RGB LED strip hard board (+5V, data, empty, Ground) LED strip length: 65.9 mm Number of LEDs: 2x 5pcs Input Voltage: +5V Current (Single strip) Max: 0.15A Current (Dual Strip) Max: 0.3A Wattage (Single strip) Max: 0.75W Wattage (Dual Strip) Max: 1.5W Copper Base Dimension (WxDxH): 60.2 x 51 x 3.7mm (2.37 x 2 x 0.15in) Copper Thickness: 3.7 mm Fin Construction: 0.08 mm fin gap / 0.08mm thickness Materials: Acrylic / POM / Copper Aluminum Cover Fitting: Nickel Plated Brass Fitting Insert: ABS Supported Tube Size Hard Tube: OD 16mm Soft Tube: OD 16mm; ID 10mm Tube Compatibility Hard Tube: PETG, Acrylic Tube Soft Tube: PVC Tube
• Package Contents: Glacier 450CPU Block 1x Push-in Fitting (Pre-installed) 2x Fitting ...
• Model #: PH-GEF_CPU450_DWT

• Type: Fitting
• Specification: Materials Fitting: Nickel Plated Brass Fitting Insert: ABS Color: Chrome Screw Thread G1/4" Thread Length 5 mm Supported Tube Size Hard Tube: OD 16mm Soft Tube: OD 16mm; ID 10mm Tube Compatibility Hard Tube: PETG, Acrylic tube Soft Tube: PVC tube Outer Diameter 26.2 mm Installed height 18.5 mm
• Package Contents: PH-GEF_F16G_CR 1x Fitting Inserts (for soft tube) 1x
• Model #: PH-GEF_F16G_CR

• Model #: 1-Water-Cooling1493