Protocols: 10/100/1000 Base-TX across LAN and PC ports; Conforms to IEEE802.3- 2005 (Clause 40) for physical media attachment; Conforms to IEEE802.3- 2002 (Clause 28) for link partner auto-negotiation; Manual or dynamic host configuration protocol (DHCP) network setup
Specifications: Interfaces:
Telephone Interfaces Two (2) FXS ports
Network Interfaces One (1) 10/100 Mbps auto-sensing ethernet ports (RJ45)
LED Indicators POWER, INTERNET, PHONE1, PHONE2
Factory Reset Button Yes
Voice, Fax, Modem:
Telephony Features Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
hold, do not disturb, 3-way conference
Voice Codecs G.711 with Annex I (PLC) and Annex II (VAD / CNG), G.723.1, G.729A/B, G.726, iLBC,
OPUS, dynamic jitter buffer, advanced line echo cancellation
Fax Over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax
Pass-through
Short / Long Haul Ring Load 2 REN: Up to 1 km on 24 AWG
Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Disconnect Methods Busy Tone, Polarity Reversal / Wink, Loop Current
Signaling:
Network Protocols...
Security: NETWORK AND SECURITY
Built-in dual-band Wi-Fi:
- Network standard: 2.4G&5G IEEE802.11a/b/g/n/ac/ax
- Frequency range: 2.4 GHz/ 5.0 GHz
- Roaming: IEEE802.11 k/r/v
Built-in Bluetooth 5.0:
- Connecting to Bluetooth Headset
IPv4/IPv6
SIP v1 (RFC2543), v2 (RFC3261)
Call server redundancy supported
NAT traversal: STUN mode
SIP link mode: Proxy mode and peer-to-peer
IP Assignment: static/DHCP
HTTP/HTTPS web server
Time and date synchronization using SNTP
SRTP for voice
TLS1.3 support
HTTPS certificate manager
AES encryption for configuration file (AES256)
Digest authentication using MD5/MD5-sess
OpenVPN, IEEE802.1X
WPA, WPA2, WPA3
Secure boot
GARP (Generic Attribute Registration Protocol)