Specifications: Technical Information
Device Supported:
IP Phone
Power Description
Input Voltage:
110 V AC
220 V AC
Input Voltage Range:
100 V AC - 240 V AC
Frequency:
50 Hz
60 Hz
Output Voltage:
48 V DC
Maximum Output Current:
917 mA
Miscellaneous
Compatibility:
Cisco Unified IP Phones:
8961
9951
9971
Specifications: Interfaces
Telephone Interfaces Two (2) FXS ports
Network Interfaces One (1) 10/100Mbps auto-sensing ethernet ports (RJ45)
LED Indicators POWER, INTERNET, PHONE1, PHONE2
Factory Reset Button Yes
Voice, Fax, Modem
Telephony Features Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
hold, do not disturb, 3-way conference
Voice Codecs G.711 with Annex I (PLC) and Annex II (VAD/CNG), G.723.1, G.729A/B, G.726, iLBC,
dynamic jitter buffer, advanced line echo cancellation
Fax Over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax
Pass-through
Short/Long Haul Ring Load 2 REN: Up to 1km on 24 AWG
Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Disconnect Methods Busy Tone, Polarity Reversal/Wink, Loop Current
Signaling
Netwo...
Specifications: Interfaces:
Telephone Interfaces Two (2) FXS ports
Network Interfaces One (1) 10/100 Mbps auto-sensing ethernet ports (RJ45)
LED Indicators POWER, INTERNET, PHONE1, PHONE2
Factory Reset Button Yes
Voice, Fax, Modem:
Telephony Features Caller ID display or block, call waiting, flash, blind or attended transfer, forward,
hold, do not disturb, 3-way conference
Voice Codecs G.711 with Annex I (PLC) and Annex II (VAD / CNG), G.723.1, G.729A/B, G.726, iLBC,
OPUS, dynamic jitter buffer, advanced line echo cancellation
Fax Over IP T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for Fax
Pass-through
Short / Long Haul Ring Load 2 REN: Up to 1 km on 24 AWG
Caller ID Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Disconnect Methods Busy Tone, Polarity Reversal / Wink, Loop Current
Signaling:
Network Protocols...
Specifications: Interfaces/Ports
PoE (RJ-45) Port:
No
USB:
No
Management Port:
No
Number of Network (RJ-45) Ports:
1
Number of FXS (RJ-11) Ports:
2
I/O Expansions
SIM Card Supported:
No
Network & Communication
Ethernet Technology:
Fast Ethernet
Network Standard:
10/100Base-T
Wireless Specifications
Wireless LAN:
No
Power Description
Redundant Power Supply Supported:
No
Physical Characteristics
Form Factor:
Wall Mountable
Desktop
Height:
3.9"
Width:
3.9"
Depth:
1"
Weight (Approximate):
4.70 oz
Specifications: TECHNICAL SPECIFICATIONS: General Information ManufacturerGN Netcom A/S Manufacturer Part Number260-09 Manufacturer Website Addresshttp://www.gnnetcom.com Brand NameJabra Product LineLink Product NameLink 260 USB adapter Marketing InformationConnect a QD headset to a softphone and get call control Plug-and-play USB adapter lets you use your corded Jabra QD (Quick Disconnect) headset with a softphone and get call control. Product TypeControl Cable Technical Information Cable TypeUSB/Quick Disconnect Connector on First End1 x Type A Male USB Connector on Second End1 x Quick Disconnect Male Device SupportedHeadphone
Holiday Shipping Details & Extended Holiday Returns 
