Specifications: Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at
IEEE 802.3bt
Device Interface
1 x Gigabit PoE++ in port
1 x Gigabit PoE+ out port
1 x Gigabit 24/48V DC passive PoE out port
LED indicators
Wall mount
IP67 housing
Data Transfer Rate
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
Gigabit: 2000Mbps (full duplex)
Performance
RAM buffer: 1Mb
MAC Address Table: 2K entries
Jumbo Frame: 9KB
DIP Switch
Adjust 24/48V DC passive voltage (default 48V DC)
Features: Extend WiFi Coverage - Boosts Internet WiFi Coverage up to 2000 Square feet and connects up to 32 devices - Compatible with any Router, Gateway, Access Point ( 2.4GHz - 450Mbps / 5GHz - 1300Mbps ) Eliminate WiFi Dead Zones - Enjoy Lag-Free connection to any type of devices, including wired devices via Gigabit Ethernet Port Stay connected - Expand coverage for your phone (Galaxy,iPhone,Android etc), Media Streaming, Gaming, Web Browsing, Alexa, Echo, Ring and more Easy Set Up - Smart indicator light helps to install in best optimal location. Three adjustable external antennas for superior coverage throughout the home is PCMag's Editors Choice Winner. Operating Temperature: 0°C~30°C (32°F~86°F) TP-Link is the World's #1 provider of consumer Wi Fi for 7 consecutive years according to IDC Q2 2018 report
Frequency Band: 2.402 to 2.485 GHz, 5.15 to 5.25 GHz, 5.725 to 5.825 GHz
Interface: 1 x Auto sensing 10/100/1000 Base-TX Ethernet (RJ-45)
1 x RJ45 console port (reserved for future use)
3-6 External antenna interfaces (reverse polarity SMA)
Specifications: PoE Standard: IEEE 802.3af (Power over Ethernet)
IEEE 802.3at (High Power over Ethernet)
PoE Power Supply Type: Mid-Span / Type B
PoE Power Output: 52V DC, 510 mA, Max. 26 watts
Power Pin Assignment: 4/5 (+), 7/8 (-)
Maximum Distance: 4 units, daisy-chain installation with 500m support
Data Rate: 10/100/1000 Mbps
Switch Architecture: Store-and-Forward
Maximum Frame Size: 1552 Bytes
Flow Control:
Back pressure for half-duplex
IEEE 802.3x pause frame for full-duplex
LED Indicators:
1 x PoE IN (Green)
1 x LAN Data (Green)
1 x PoE OUT (Green)
Power Requirements: IEEE 802.3at compliant with voltage within 52V-56V DC
Power Consumption: 3.2 watts (system maximum)