Wired & Wireless Accessories

• Type: N/A
• Color: Black
• Specifications: Processor: MIPS 1004Kc 880 Mhz dual core Memory: 256 Mbyte DDR3, 256M Byte NAND Management Interface: (1) Ethernet out-of-band management (1) Ethernet in-band management (1) RJ45 Serial Console Por (1) Bluetooth Networking Interface: (8) GPON OLT SFP (2) 10 Gbps SFP+ Buttons: (1) Reset, Press 5 seconds - Reset to default LEDs / Display: (1) Power, Blue/White, Blinking Blue: reset to default Steady Blue: system is booting Steady White: service is ready (8) GPON OLT SFP, Steady/Blinking white : GPON link/activity (2) SFP+ Ethernet. White(10G) Green(1G), steady on after link is up, blinking while activity (1) Ethernet RJ45 Out-of-band Management: Green(1G), steady on after link is up, blinking while activity Power Method: 100-240VAC/50-60 Hz universal input Power Supply: (2) Hotswap AC/DC PSU Supported Vo...
• Model #: UF-OLT

• Type: PoE Splitter
• Color: White
• Specifications: Connectors: 2 x RJ-45, shielded, EIA 568A and 568B DC Jacks On unit: O.D x I.D = 2.5 x 6.4mm Ext. Cable #1: O.D x I.D = 5.5 x 2.5mm Ext. Cable #2: O.D x I.D = 3.4 x 1.4mm Data Rate: 10/100/1000 Electrical: Pin Assignment & Polarity: 3/6 (+),1/2 (-) or 4/5 (+),7/8 (-) Input voltage: 44 - 57 Vdc Input power: 70W max Output power: 54W max Output Current: 5A @ 12V; 2.5A @ 24V Indicators: Output Power Indicators: Green LED (4-pairs), Yellow LED (2-pairs) Thermal Rating: 38 BTU/Hr Reliability MTBF: 100,000 hours @ 25 degree C
• Model #: PD-AS-951/12-24

• Type: PoE+ Extender
• Color: Black
• Specifications: Hardware Port: 1 Industry Standards: IEEE 802.3af PoE, IEEE 802.3at PoE+ IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Performance Auto MDIX: Yes Auto-Negotiation: Yes Compatible Networks: 10/100/1000 Mbps Flow Control: Half-duplex back-pressure , IEEE 802.3x pause frame for full-duplex Full Duplex Support: Yes Jumbo Frame Support: No Maximum Cable Length: 328 ft. [100m] Maximum Data Transfer Rate: 2 Gbps (Full-Duplex) MTBF: 50,000 Hours Power Output: One extender-24W Power Output: Two extender daisy chain-20W Power Output: Three extender daisy chain-16W Power Output: Four extender daisy chain-12W Surge Protection: EN61000-4-2 (ESD)-2kV EN61000-4-5 (Surge)-2kV Switching Architecture: Store-and-Forward Connector Type(s): 2-RJ-45 Female Enclosure Type: Steel Indicators LED Indi...
• Model #: POEEXT1GAT

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 1.04 lbs. Power Requirements: DC 12~48V, 5A max. Unit Output Voltage: DC 54V Power Consumption: 120 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 4 IEEE 802.3at Power over Ethernet Plus Package Contents: IPOE-171-95W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-95W

• Type: PoE Injector
• Color: Black
• Specifications: Standards 802.3 10BaseT 802.3u 100BaseT 802.3ab Gigabit Ethernet 802.3at / af Power-over-Ethernet Physical Interface (1) Gigabit Data Port (1) Gigabit Data & Power Output Port (1) IEC-320 C6 AC Connector Power Input voltage : 100 to 240 VAC Input current: 0.8A maximum for 100 VAC AC input Frequency: 47-63Hz Maximum output power: 30W Pin4, 5:54V; Pin7, 8: Return Temperature Range Operating: 32 degree F to 104 degree F (0 degree C to 40 degree C) Storage: -22 degree F to 176 degree F (-30 degree C to 80 degree C) Humidity (non-condensing) Operating: 5 to 90% or less Storage: 5 to 90% or less LED Indicator: 1 x Power on Green Mounting: Wall (anchors & screws included) Dimensions: 1.30" x 3.90" x 2.27"
• Parts: Manufacturers Limited Warranty: 1 Year / Parts Onl...
• Model #: EPA5006GAT

• Type: PoE Injector
• Specifications: Interface: "Data" Input Port: 1 x RJ-45 STP "PoE (Data+Power)" Output Port: 1 x RJ-45 STP Input power terminal block: 1 LED Indicator: System: Power 1, Power 2, Fault (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: 10Base-T: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000Mbps Dimension: 1.26" x 5.31" x 3.46" Weight: 1.05 lbs. Unit Input Voltage: 24 - 48V DC; 24V AC Power Consumption: 30 watts max. Number of device can be powered: 1 Installation: DIN rail kit and wall mount ear Alarm: Provides one relay output for power failure, Alarm relay current carry ability: 3A at DC 30V Enclosure: IP30 slim type metal case Power over Ethernet PoE Standard: IEEE 802.3at High ...
• Model #: IPOE-162

• Type: PoE Injector
• Specifications: Interface: "Data" Input Ports: 16 x RJ45 "Data + Power" Output Ports: 16 x RJ45 Management Port: 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX Data Rate: 10/100/1000Mbps LED System: SYS PWR x 1 (Green), PoE Failure x 1 (Red), Fan Failure x 2 (Red) Management port x 2: 1000 (Green), 10/100(Orange) Per PoE Port: Ultra 60W PoE-in-use x 1 (Green), 802.3at/af PoE-in-use x1 (Orange), PoE Power Usage LED x4 (Green) Power Requirements: 100 - 240V AC, 50/60 Hz, 8A Power Consumption: 800 watts (max.) / 2729BTU Ventilation: Fan x 3 Enclosure: Metal PoE Standard: IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus 4-pair Ultra PoE PoE Power Supply Type: End-span / Mid-span / UPoE (Ultra PoE) Power Pin Assignment: Pair 1 end-span: 1/2(-), 3/6(+) Pair 2 mid-span: 4/5(+), 7/8(-) UPoE: 1/2(-), 3/6(+),...
• Model #: UPOE-1600G

• Type: PoE Splitter
• Color: Black
• Specifications: Interface: "PoE (Power + Data)" Input Port : 1 x RJ-45 10/100/1000Base-T "Data" Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block LED Indicator: System: Power Ready x 1 (Green) Network Cable: 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6 Distance up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (vary on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE 48~56V DC Power Output: 12V / 24V DC, max 2A (adjustable) Enclosure: IP30 metal case Installation: DIN rail kit and wall mount ear ESD / EFT Protection: 6 KV DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of devices that can be powered: 1 or 2 (Vary on device's power requirement; DC1 + DC2 cannot be over 25 watts.) ...
• Model #: IPOE-162S

• Brand: Ubiquiti Networks
• Part Number: UACC-AOC-SFP10-5M
• Type: Cable
• Specifications: Connector type: SFP+ to SFP+ Cable length: 5 m / 16.4 ft Cable jacket: PVC Jacket OD: 3.0 mm Wavelength: 850 nm Supported data rates: 10 / 1 Gbps Jacket color: Aqua Ambient operating temperature: 0 to 70° C (32 to 158° F)
• Model #: UACC-AOC-SFP10-10M

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 0.95 lb. Power Requirements: DC 48~56V, 2A max. Unit Output Voltage: DC 45~53V Power Consumption: 75 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet Package Contents: IPOE-171-60W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-60W

• Type: PoE Injector
• Color: Black
• Specifications: Standards - IEEE 802.3 - IEEE 802.3u - IEEE 802.3ab - IEEE 802.3af - IEEE 802.3at - IEEE 802.3bt Device Interface - 1 x Gigabit port - 1 x 4PPoE Gigabit port - 4-pin removable terminal block - LED indicators - DIN-Rail mount - Wall mount - Grounding point Power - Input: 52 - 56 V DC - Compatible power supply: TI-S12048 (sold separately) - Max. consumption (PoE): 72W Operating Temperature: - 40° - 75° C (-40° - 167° F) Operating Humidity: Max. 95 % non-condensing Dimensions (L x W x H): 104 x 82 x 32mm (4.10" x 3.20" x 1.20") Weight: 154g (5.4 oz.)
• Model #: TI-IG90

• Type: PoE Injector
• Color: Black
• Specifications: Interface: LAN: 1 x RJ-45 STP, "Data" Input Port POE: 1 x RJ-45 STP, "Data + Power" Output Port AC Connector: 1 x AC Input power socket, IEC-320 C6 Network Cable: Ultra PoE (60W): 4-pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) 802.3af / at PoE(15W / 30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) LED Indicator: System: Power x 1 (Green) PoE Port: Active, PoE ready / In Use x 1 (Green) Data Rate: 10/100/1000 Mbps Unit Output Voltage: DC 50-57V, 1.2A Power Requirements: 100-240V AC @ 50/60 Hz, 1.5A max. Power Consumption: 60 watts max. PoE Standard: Ultra PoE over 4-pairs UTP, High Power over Ethernet End-Span / Mid-Span PSE PoE Power Supply Type: End-Span + Mid-Span Power Pin Assignment: Pair 1 End-Span: 1/2 (+), 3/6 (-) Pair 2 Mid-Span: 4/5 (+), 7/8 (-) PoE Power Output: DC 50-57V/60-w...
• Model #: POE-173

• Specifications: Interfaces/Ports: 1 x RJ-45 Data Transfer Rate: 230 Kbps Serial Management: SNMP Protocols: Telnet Reverse Telnet PPP SSH v2 HTTP DHCP ARP RARP TCP UDP Status Indicators: Link / Power Input Voltage: 100 V AC to 240 V AC 9 V DC to 30 V DC Input Current: 400 mA 12 V DC 500 mA 9 V DC to30 V DC
• Parts: 1 year limited
• Labor: 1 year limited
• Model #: 70001805

• Type: PoE Splitter
• Color: White
• Specifications: Interface: PoE (Power + Data) Input Port: 1 x RJ-45 STP Data” Output Port: 1 x RJ-45 STP DC Out Plug Connector: 1 LED Indicator System: PoE In x 1 (Green) Network Cable: 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA / TIA-568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (varies on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE+ 52 ~ 56V DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of clients device can be powered: 1 Power Output: 12V DC, 2A max 24V DC, 1A max Standards Compliance: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at...
• Model #: POE-162S

• Type: Power Supply
• Color: Black
• Specifications: Form Factor: Rack-mountable Efficiency: 80% Hot Swappable Power Supply: Yes Input Voltage Type: AC Input Voltage Range: 264 V AC MTBF: 624961 Hour Protection Type: Over Current Compatible with D-Link DGS-3120 Series Switches: DGS-3120-24PC DGS-3120-48PC DGS-3120-48PC
• Model #: DPS-700

• Type: PoE Injector
• Color: Black
• Specifications: Hardware Version: 2 Interface: "Data" Input Ports: 4 x RJ-45 "Data+Power" Output Ports: 4 x RJ-45 Data Rate: 10/100/1000 Mbps LED: System: Power x 1 (Green) Per PoE Port: PoE ready / in-use x 4 (Green) Network Cable: 10Base-T: 4-Pair UTP Cat. 5 up to 100m (328 ft.) 100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328 ft.) 1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m, 328 ft.) Power Requirements: DC 52V~56V PoE Power Supply Type: Mid-Span PoE Power Output: Per Port DC 52V 30.8 watts / 15.4 watts Power Pin Assignment: 4/5(+), 7/8(-) PoE Power Budget: 120 watts Number of 802.3af PD Class 0, 1, 2, 3 can be powered: 4 Number of 802.3at PD Class 1, 2, 3 can be powered: 4 Number of 802.3at PD Class 0, 4 can be powered: 4 Standards Compliance: IEEE 802.3 10Bas...
• Model #: HPOE-460

• Type: PoE Extender
• Specifications: PoE Standard: IEEE 802.3af (Power over Ethernet) IEEE 802.3at (High Power over Ethernet) PoE Power Supply Type: Mid-Span / Type B PoE Power Output: 52V DC, 510 mA, Max. 26 watts Power Pin Assignment: 4/5 (+), 7/8 (-) Maximum Distance: 4 units, daisy-chain installation with 500m support Data Rate: 10/100/1000 Mbps Switch Architecture: Store-and-Forward Maximum Frame Size: 1552 Bytes Flow Control: Back pressure for half-duplex IEEE 802.3x pause frame for full-duplex LED Indicators: 1 x PoE IN (Green) 1 x LAN Data (Green) 1 x PoE OUT (Green) Power Requirements: IEEE 802.3at compliant with voltage within 52V-56V DC Power Consumption: 3.2 watts (system maximum)
• Model #: POE-E201

• Type: Converter
• Specifications: 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-SX 850nm multimode (SC) [62.5/125 µm fiber: 220 m/722 ft.] Link Budget: 7.0 dB [50/125 µm fiber: 550 m/1804 ft.] Standards: IEEE 802.3 Max Frame Size: untagged: 1632 bytes / tagged: 1628 bytes Status LEDs: PWR (Power): (below RJ-45) ON = Lit for normal operation FX-Link/Act (Fiber Link/Activity): (Upper Left on RJ-45) ON = Link; Flashing = Activity TX-Link/Act (Copper Link/Activity): (Upper Right on RJ-45) ON = Link; Flashing = Activity Power Consumption: 3.15 Watts Sources: Unit accepts 5 VDC to 28 VDC Wall Mount AC adapter: 12 VDC 400mA Environment Storage: -15 to +65 °C Operating: 0°C to 50°C Altitude: 0 – 10,000 feet Humidity: 5% to 95% (non-condensing) Compliance Safety: Wall Mount Power Supply, UL Listed, C-UL Listed (Canada) FCC Class A, CISPR22/EN55022...
• Model #: M/GE-PSW-SX-01-NA

• Type: Antenna
• Color: Black
• Specifications: Color: White Antenna type: Dual-band dipole Operating frequency range: 2400 to 2500 MHz; 5150 to 5850 MHz Nominal input impedance: 50 Ohms VSWR: Less than 2:1 Peak Gain @ 2.4. GHz: 2 dBi Peak Gain @ 5 GHz: 4 dBi Elevation plane 3dB beamwidth @2.4 GHz: 63 degrees Elevation plane 3dB beamwidth @ 5 GHz: 39 degrees Connector type: RP-TNC plug Antenna length: 6.63" Weight: 1.3 oz. Environment: Indoor, office
• Model #: AIR-ANT2524DW-R

• Type: Jumper Power Cord
• Color: Black
• Specifications: Plug/Connector Type: IEC 60320 C14, IEC 60320 C15 Voltage Rating: 250 V AC Frequency: 50 Hz
• Model #: CAB-C15-CBN=

• Type: Serial Server
• Color: Black
• Specifications: What's in the box: Digi Connect EZ 2 - serial server, 2-port, with accessories Power supply - 12 V, 3 A (24000136) DIN rail clip (76002095)
• Model #: EZ02-CA00-GLB

• Type: PoE Splitter
• Specifications: Standards IEEE 802.3af (Power over Ethernet) IEEE 802.3at (High-Power PoE+ Power over Ethernet) IEEE 802.3 (10Base-T Ethernet) IEEE 802.3u (100Base-TX Fast Ethernet) Media support: 10Base-T Cat3, 4, 5 UTP/STP RJ45 100Base-TX Cat5 UTP/STP RJ45 Ports: 1 RJ45 10/100 Mbps input port for 48 V IEEE 802.3af-compliant signal 1 RJ45 10/100 Mbps output port 1 power output port Certifications: FCC Class A, CE LEDs: LINK Power Output power: 5, 7.5, 9 or 12 V DC, selectable via switch Maximum output: 5 V - 4 A, 7.5 V - 2.7 A, 9 V - 2.3 A, 12 V - 1.7 A Polarity, outer: negative ( - ); inner: positive ( + ) Power consumption: 25.4 Watts (maximum) Environmental Metal housing Dimensions: 4.00" x 2.90" x 0.90" Weight: 0.24 kg (0.5 lb.) Operating temperature: 0 - 60°C (32 - 140°F) Operating humidity: 10 - 90% RH, non-condensing Storage tem...
• Model #: 560443

• Type: Power Supply
• Specifications: Input Voltage Range: AC 100 - 240 V Frequency Required: 47 - 63 Hz Power Capacity: 1200 Watt
• Model #: SX-ACPWR-SYS

• Type: Kit
• Specifications: Video Channel: 4 channel bi-direction Video Connector: BNC Video Input / Output Impedance: 75 ohm / unbalanced interface Video Input / Output Voltage: 1.0 Vpp / Typical peak-peak value Video Bandwidth: 5 Hz to 6.5 MHz Video Digital Bit Width: 8/10 bit Differential Gain (DG): < 1.3% (Typical Value) Differential Phase (DP): < 1.3 degree (Typical Value) SNR Weighted: > 63 dB (Typical Value) Data Channel: 4 channels Physical Protocol: RS-485 Operation Mode: Simplex Data Connector: 4 Pin terminal block with screw clamps Data Rate: DC-150 Kbps Data Distance: RS-485: 0-20 Km BPS: 0-115.2 Kbps Bit Error Rate (BER): < 10-9 Optical Connector: FC Fiber Type: Single-mode, single fiber Distance: 20 km for single mode Optical Wavelength: VF-402-T:TX: 1310nm, RX: 1550nm VF-402-R:TX: 1550nm, RX: 1310nm Transmitter Couple Power: M...
• Model #: VF-402-KIT

• Type: Console Server
• Specifications: 32 x serial - RS-232 - RJ-45 1 x management - console - RJ-45 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 Total Expansion Slots: 1 Memory: 64MB SDRAM Input Voltage: 110 - 220 V AC Form Factor: Rack-mountable Dimensions: 17.0" x 8.5" x 1.8" Weight: 5.8 lbs.
• Model #: 70001908

• Type: AC Adapter
• Specifications: Output Voltage: 48 V DC Fixed Output Voltage: 48 V DC Maximum Output Current: 750 mA Compatibility: Motorola AP-7131 Wireless Access Point.
• Model #: PWRS-14000-247R

• Device Type: Converter
• Standards: IEEE 802.3, 10Base-T IEEE 802.3u, 100Base-TX IEEE 802.3ab, 1000Base-T IEEE 802.3z, 1000Base-SX/LX
• Ports: 1 x 10/100/1000Base-T port 1 x 1000Base-SX/LX port
• LEDs: PWR TP LINK / ACT, 1000 Fiber LINK / ACT
• Model #: GT-805A

• Type: PoE Injector
• Color: Black
• Specifications: Interface: Input Port 1 x RJ-45 STP Data In Output Port 1 x RJ-45 STP PoE (Data + Power) Out DC socket 56V DC Input LED Indicator: System: Power x 1 (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: Ultra PoE (60W): 10/100/1000Base-T: 4-Pair UTP Cat. 5e, 6 up to 100m (328 ft.) 802.3af/at PoE(15W / 30W): 10/100/1000Base-T: 2-Pair UTP Cat. 3, 5, 5e, 6 up to 100m (328 ft.) Data Rate: 10/100/1000 Mbps Unit Input Voltage: DC 56V Power Requirements: External AC-to-DC adapter 100-240V AC, 50/60 Hz, 1.5A Power Consumption: 65 watts max. PoE Standard: IEEE 802.3at High Power over Ethernet End-span / Mid-span PSE Power Output: DC 56V / 60-watt PoE via 4-pairs DC 56V / 30-watt PoE via 2-pairs PoE Power Supply Type: End-Span + Mid-Span Power Pin Assignment: Pair 1: 1/2 (-), 3/6 (+) Pair 2: 4/5 (+), ...
• Model #: POE-171

• Type: PoE Injector
• Specifications: Input Voltage Range: AC 100 - 240 V Frequency Required: 50/60 Hz Interfaces: 1 x Gigabit LAN - RJ-45 Compliant Standards: FCC Class B certified, EN 60950, EN55024, UL 60950, CISPR 22, EN55022 Class B, FCC Part 15 Compatibility: HP M200 802.11n, MSM310, MSM310-R, MSM313, MSM320, MSM320-R, MSM325, MSM335, MSM710
• Model #: J9407B

• Type: PoE Midspan
• Color: Black
• Specifications: No. of Ports: 12 Pass Through Data Rates 10/100/1000 Mbps PoE Output: Pin Assignment and Polarity: Data Pairs 1/2 (-) and 3/6 (+) Spare Pairs 7/8 (-) and 4/5 (+) Output Power Voltage: 54-57V DC User Port Power: 72W Typ. Aggregate Power: 1000W Input Power Requirements: AC Input Voltage: 100 to 240V AC DC Input: 57V (RPS or another 9500G midspan) AC Input Current: 450W Units: 5.5A @ 110V AC; 2.75A @ 220V AC 1000W Units: 12A @ 110V AC; 6A @ 220V AC AC Frequency: 50 to 60 Hz Management PowerView Pro included Indicators: System Indicator: AC Power (Green) User Indicator: Channel Power (Green / Orange) Connectors: PoE ports and management port: Shielded RJ-45, EIA 568A and 568B Console Port: USB Connector Type B DC Connector: DC Block Terminal RPS Com Connector: HD-D-sub-15
• Model #: PD-9512G/ACDC/M

• Type: PoE Injector
• Color: Black
• Specifications: Interface: "Data" Input Port: 1 x RJ45 STP "PoE (Data + Power) Output Port: 1 x RJ45 STP AC Input Power Socket: 1 LED Indicator: System: Power x 1 (Green) PoE Port: Active, PoE ready-in-use x 1 (Green) Network Cable: 10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100BASE-TX: 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) EIA/TIA-568 100-ohm STP (100m) Data Rate: 10/100 Mbps Unit Output Voltage: DC 53V, 0.6A Power Requirements: 100-240V AC, 50/60 Hz, 0.75A Power Consumption: 30 watts (max.) Number of Devices that can be powered: 1 PoE Standard: IEEE 802.3at Power over Ethernet Plus / PSE PoE Power Output: DC 53V / 30 watts PoE Power Supply Type: Mid-span Power Pin Assignment: 4/5 (+), 7/8 (-) Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE ...
• Model #: POE-164

• Type: Power Supply
• Specifications: Input Voltage Type: AC Input Voltage Range: 264 V AC Output Voltage: 56.5 V DC
• Model #: JG137A

OUT OF STOCK

• Type: Consumer Electronics
• Model #: EPXR15

OUT OF STOCK

• Type: Consumer Electronics
• Type: Others
• Connector Number: 1
• Model #: SFP-H10GB-CU5M=