Features: Reduce Lag and Remove Bottlenecks from Your Network: Remove bottlenecks from your home network by upgrading it to a 10/100/1000Mbps Gigabit network with this Gigabit Ethernet switch. Enjoy the fastest possible file transfer speeds and reduced lag with wired connections using Cat5e (or better) cables to distances up to 328
Features: • IP30 rated industrial power supply with integrated DIN-rail mount
• Provides up to 120 Watts of power (48 V, 2.5 A)
• Built-in active PFC (PF > 0.93)
• Short circuit/overload/over voltage/over temperature protection
• High efficiency (91%) design
• UL 508 approved
• 100 % full load burn-in test
• Extreme -25 to 70 °C
Power: Power / Device Type: Power Supply
Power / Installed Qty: 2
Power / Provided (W): 400 Watt
Max Power Consumption: 166.8 Watt
Power / Voltage Required: 100 to 240 VAC
Standards: IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning tree protocol IEEE 802.1w Rapid spanning tree protocol IEEE 802.1s Multiple spanning tree protocol IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2
Primary Ports: 24 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports, 4 1000Base-SX/LX/BX SFP interfaces, shared with Port 21 to Port 24 Compatible with 100Base-FX SFP, 1 x RS-232 DB9 serial port (115200, 8, N, 1)
Management Interface: 48x GE RJ45 and 4x 10GE SFP+ ports
Management Feature: Automation Stitches
Display Average Bandwidth and Allow Sorting on Physical Port / Interface Traffic
Dual Firmware Support
HTTP / HTTPS
IPv4 and IPv6 Management
Link Monitor
Managed from FortiGate
Packet Capture
POE Control Modes
Provide warning if L2 table is getting full
RMON Group 1
SNMP v1/v2c/v3
SNMP v3 traps
SNTP
Software download/upload: TFTP/FTP/GUI
SPAN, RSPAN, and ERSPAN
Standard CLI and Web GUI Interface
Support for HTTP REST APIs for Configuration and Monitoring
Syslog UDP/TCP
System alias command
System Temperature and Alert
Telnet / SSH