Specifications: Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate) : SATA
Drive Size: 2.5in
Interface USB: 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity of up to 6TB.
Backward compatible with USB 2.0/1.1.
DC Power Supply 12V included for 3.5" devices.
On/Off Switch for HDD protection.
Pluy & Play, reliable and stable.
Specifications: Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - USB 3.1 USB Type-A (9 pin; Gen 2; 10 Gbps) Male
Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in
Interface: USB 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate : 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Specifications: The USBPLATE4 4 port USB 2.0 slot plate adapter converts the USB pins on your motherboard into four USB-A female ports, enabling you to add USB connections to the back of your PC.
Backed by Lifetime Warranty, the USBPLATE4 is designed and constructed for maximum durability, to ensure dependable performance.
Please Note: Check your motherboard’s manual for the USB pinout diagram. The USBPLATE wiring scheme is: Red=Power, Green=Signal, White=Signal, Black=Ground
Connector A: 2 x IDC (10 pin, Motherboard Header) Female
Type: Ethernet Splitter 1 to 2 RJ45 Network Adapter
Changer Type: Gigabit RJ45 Ethernet Splitter 1 to 2
Specifications: Important Note: This Gigabit RJ45 Ethernet Splitter equipped with a 80cm/2.6 ft USB charging cable, it can support charging(recommended power socket as it is more stable). Cannot be used without power connection.
Ethernet Splitter 1 to 2: Ethernet Port Splitter is mainly used to solve the connection problem caused by insufficient wiring, use the USB power supply cable and support two computers to share one ethernet cable simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously.
1000Mbps Transfer Speed: RJ45 Splitter Adapter 1 to 2 ways dual female port LAN ethernet cable, the speed of two cable group (1 and 2) can reach 1000Mbps. And the signal transmission of two cable groups will not int...
Specifications: Sigle bay 2.5" HDD/ SSD bracket Supports 2.5" HDD/SSD into 3.5" PC Bay Eight (8) screws included. Black Metal material Product Size: 3.94" x 4.72" x 0.59"
Specifications: USB C to DVI Cable enables you to connect a USB-C computer or phone to an DVI-equipped monitor or projector. It is perfect for you to enjoy big screen and efficient life. Audio is not supported over DVI and must be transmitted separately USB-C DP ALT mode source is requested Supports resolution up to 1080 P@60Hz,but we recommend you to make sure your monitor/tv could supply corresponding output. Suport Mirror & Extend Dual Mode Thunderbolt 3 computer host compatible Plug and play, no driver is needed Compatible Devices(not a full list): New iPad Pro Mac Mini MacBook Air 2018 iMac 2017 / iMac 2017 Pro*MacBook Pro 2017 / 2016 (13 &15 inch) MacBook 2016 / 2015 (12 inch) Surface Book 2 HP Spectre X360 Lenovo Yoga 910 HP EliteBook Folio G1 Google Chromebook Pixel DELL XPS 13 Acer Aspire Switch 12S / R13 / V...
Type: Ethernet Splitter 1 to 2 RJ45 Network Adapter
Changer Type: Gigabit RJ45 Ethernet Splitter 1 to 2
Specifications: Important Note: This Gigabit RJ45 Ethernet Splitter equipped with a 80cm/2.6 ft USB charging cable, it can support charging(recommended power socket as it is more stable). Cannot be used without power connection.
Ethernet Splitter 1 to 2: Ethernet Port Splitter is mainly used to solve the connection problem caused by insufficient wiring, use the USB power supply cable and support two computers to share one ethernet cable simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously.
1000Mbps Transfer Speed: RJ45 Splitter Adapter 1 to 2 ways dual female port LAN ethernet cable, the speed of two cable group (1 and 2) can reach 1000Mbps. And the signal transmission of two cable groups will not int...