Hard Drive Adapters

• Model #: 9435761178285

• Model #: 652843035451

• Model #: CLAWB00N9924AI

• Model #: CLAWB008VNCZ6K

• Type: M.2 port (M key) into one PCIe x4
• External Ports: M.2 (NGFF)
• Internal Ports: PCI Express x 4 via full size x 16 pinout
• Operating Systems Supported: • A computer and BIOS (usually set to AHCI) compatible with NVMe SSD over PCIe lanes. • Windows 7 with Microsoft’s Hotfixes for NVMe SSD. • Windows 8 and above. • Linux. • If after installation you get a yellow exclamation mark under the Device Manager, you may need to get an additional driver
• Model #: EC-PCIE

(1)

• Type: Enclosure
• Features: Comes with a silicone protective case and lanyard for enhanced SSD protection and portability. Features an aluminum alloy shell with a multi-stacked heat dissipation design for effective cooling. Supports a 10Gbps transmission rate for fast and reliable data transfer. Dual protocol support for NVME+NGFF, catering to various storage requirements. Fully compatible with Windows, Mac
• Dimensions: 137*45.8*17.8MM
• Model #: AXM2-G2-GY-BP

(1)

Limited time offer, ends 03/26

• Type: Dock
• Material: abs plastic
• HDD Count Supported: Single HDD
• Number of Bay: 1
• Model #: K308SAS

Limited time offer, ends 03/31

• Type: USB to SATA
• Specifications: Interface: USB2.0 to 2.5 inch SATA SSD/HDD Data transfer rate: 480Mb/s Suitability:2.5" SATA HDD Power Supply: Host USB port; Built in TWO LED indicator light for Power and Data transfer: Power (Red), Access (Blue). Requirements: Desktop/laptop PC with available USB 2.0 port. Windows 98SE/ME/2000/XP/Vista/MAC. When lack of power, plug the additional USB connector upto the omputer.
• Connector A: USB 2.0
• Connector B: SATA 22pin
• Model #: 11-001-158

• Specifications: Jmicro JM20330 Chipset Plug & Play and Hot-swapping capability Automatic SATA 3.0/1.5 Gbps speed negotiation Serial-ATA 1.0 specification compliant ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150Mbps Support ATA PIO and UDMA modes 0 to 4 Support 3.5" IDE hard drives and 5.25" optical drives Ultra low power consumption Master/Slave mode support Support Windows 98SE/ME/2000/XP Operating System
• Package Contents: SATA to ATA/ATAPI IDE Interface Adaptor SATA Cable Power Cable
• Parts: 3 years limited
• Labor: 3 years limited
• Model #: SY-JM-SIDE

Limited time offer, ends 03/21

• Color: Black
• Changer Type: IDE SATA to USB 3.0
• Specifications: sata and ide to usb 3.0 adapter supports 2.5"/3.5" HDD/SSD, 2.5"/3.5" IDE, 5.25" DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive; Hard drive converter is retrieve old files, backup, cloning and data recovery device tools. This converter allowing connect to three hard disk drives simultaneously.
• Features: IDE to usb adapter supports super speed USB 3.0 enables data transfer rates of up to 5Gbps, data transfer is super simple and easy, backward compatible with USB 2.0 / USB 1.1. External hdd hard drive reader support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux, etc. (The
• Model #: C02#Q0132_B

• Changer Type: USB to SATA
• Specifications: Detects and erases HPAs: Detection always indicated by LED. Handled according to configuration settings. Detects and erases DCO: Detection always indicated by LED. Handled according to configuration settings. Switch Guard: Yes Drive Compatibility: 2.5" and 3.5" SATA drives 3.5-inch PATA (IDE) drives Compatible (via adapters) with 1.8" ZIF drives (Toshiba/Hitachi), 1.8" drives (Toshiba), and 2.5" IDE / PATA drives. Operating System Compatibility for erasure: Operating system not required for erasure. Drive eRazer operates as a stand-alone device and will erase disks from any operating system. Operating System Compatibility for dock use: Windows 7, XP, Vista Macintosh OS X Linux distributions that support USB 2.0 Data speeds: Speeds vary depending on the drive model and type. Modern drives operate at 7GB/min. Operat...
• Model #: 31550-0109-0000

Limited time offer, ends 04/06

• Windows Vista: Works with Windows Vista
• Form Factor: 3.5"
• Parts: 1 Year
• Labor: 1 Year
• Model #: J-yield E01B

• Changer Type: IDE to Compact Flash
• Specifications: • Standard 2.5" IDE storage device form factor (100.2mm x 69.9mm x 9.8mm) • LED indicators: Power On, Master and Slave Card Detect, and Disk Activity • Can be a primary bootable device containing the OS and applications (depends on CF card specifications) • Transparent to operating system and does not require any drivers • Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux operating systems • Power supply via IDE interface (44-pin SFF IDE connector, +5V) IDE Interface • 44-pin SFF (Small Form Factor) IDE connector • Supports Ultra-DMA IDE Interface • Does not support hot swap on the IDE interface CF Interface • 2 CF card slots (Master/Slave) supporting CF Type I form factor • Supports PIO mode, DMA and Ultra-DMA mode with data transfer rate u...
• Model #: SD-ADA45006

OUT OF STOCK

• Model #: 9435761226450