Hard Drive Adapters

• Model #: LAC-00001

• Model #: Kepler-8.3-OYS-423

• Model #: 640310493725

• Model #: C12Y -2 in 1A931

Limited time offer, ends 09/20

• Model #: C5Z9--LSY-8190569

Limited time offer, ends 10/14

• Model #: G4R98G

• Model #: C12Y -2 in 1A978

• Type: M.2 port (M key) into one PCIe x4
• External Ports: M.2 (NGFF)
• Internal Ports: PCI Express x 4 via full size x 16 pinout
• Operating Systems Supported: • A computer and BIOS (usually set to AHCI) compatible with NVMe SSD over PCIe lanes. • Windows 7 with Microsoft’s Hotfixes for NVMe SSD. • Windows 8 and above. • Linux. • If after installation you get a yellow exclamation mark under the Device Manager, you may need to get an additional driver
• Model #: EC-PCIE

• Model #: C12Y -2 in 1A1010

• Model #: C12Y -2 in 1A956

• Model #: C12Y -2 in 1A132

• Model #: C12Y -2 in 1A162

• Model #: C12Y -2 in 1A1025

• Model #: ww-43

• Model #: ww-45

• Model #: AOE-1208

• Model #: 8567457956

• Brand: SoNNeT
• Series: PA09-HS
• Part Number: PA09_HS
• Color: Black
• Model #: VESAF894SW9

• Changer Type: IDE to Compact Flash
• Specifications: • Standard 2.5" IDE storage device form factor (100.2mm x 69.9mm x 9.8mm) • LED indicators: Power On, Master and Slave Card Detect, and Disk Activity • Can be a primary bootable device containing the OS and applications (depends on CF card specifications) • Transparent to operating system and does not require any drivers • Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux operating systems • Power supply via IDE interface (44-pin SFF IDE connector, +5V) IDE Interface • 44-pin SFF (Small Form Factor) IDE connector • Supports Ultra-DMA IDE Interface • Does not support hot swap on the IDE interface CF Interface • 2 CF card slots (Master/Slave) supporting CF Type I form factor • Supports PIO mode, DMA and Ultra-DMA mode with data transfer rate u...
• Model #: SD-ADA45006

• Model #: 8567457952

• Changer Type: USB to DB9 (RS-232)
• Specifications: Cable Length: 24" Connector Types: 1 - DB9 Male Internal Ports: 1 - 9 pin IDC (Motherboard Header) Female Number of Ports: 1 Card Type: Low / Standard Profile Max Baud Rate: 115200 Kbps Data Bits: 7, 8 Stop Bits: 1, 2 Parity: None, Odd, Even, Space, Mark Bus Type: USB 2.0 Chipset ID: FTDI FT232R Microsoft WHQL Certified: Yes OS Compatibility: Windows 98/ 98SE/ 2000/ XP(32/64bit)/ Server 2003(32/64bit)/ Vista(32/64bit)/ 7(32/64bit)/ Server 2008 R2, Windows XP Embedded/ CE 4.2/ CE 5.0/ CE 6.0, Mac OS 8, 9, 10.4.x/ Linux 2.4, 2.6 Applications: Perfect for system builders looking to add legacy functionality to newer motherboards that lack an integrated RS232 port Connect, monitor and control industrial/automotive sensors and equipment Connect bar code scanners, receipt printers and other serial devices to an inte...
• Model #: ICUSB232INT1

• Color: Black
• Cable Length: 24"
• Changer Type: USB to DB9 (RS-232)
• Specifications: Connector Types: 2 - DB-9 (9 pin; D-Sub) Male Interface: serial Number of Ports: 2 Card Type: Low / Standard Profile Max Baud Rate: 115200 bps Data Bits: 7, 8 Stop Bits: 1, 2 Parity: None, Odd, Even, Space, Mark Bus Type: Motherboard Header Internal Ports: 1 - IDC (10 pin; Motherboard Header) Female External Ports: 2 - DB-9 (9 pin; D-Sub) Male Chipset ID: FTDI FT232R Microsoft WHQL Certified: Yes Operating Temperature: -40°C to 85°C (-40°F to 185°F) Storage Temperature: -65°C to 85°C (-85°F to 185°F)
• Model #: ICUSB232INT2