Specifications: Material of Construction: PC (Plastic)
Cable Jacket Rating: VW-1
Cable Outer Diameter (OD): 3.9mm
Wire Gauge (AWG): 32 + 28
Side A - Connector 1: USB A (MALE)
Side A - Connector 2: USB C (MALE)
Side B - Connector 1: RJ45 (FEMALE)
USB Specification: USB 1.1 (up to 12 Mbps); USB 2.0 (up to 480 Mbps); USB 3.0 (up to 5 Gbps)
Driver Required: No
Recommended Category Cable: Cat6/6a
Remote Wakeup Support: Yes
Network Speed Support: 1 Gbps (Gigabit)
Specifications: Bus Type: USB 2.0
Interface: Serial
Data Bits: 7, 8
FIFO: 256 Bytes
Max Baud Rate: 921.6 Kbps
Maximum Data Transfer Rate: 480 Mbps
Parity: Odd, Even, Mark, Space, None
Serial Protocol: RS-232
Stop Bits: 1, 2
LED Indicators: 8 x Data Transmit, 8 x Data Receive
Center Tip Polarity: Positive
Input Current: 1.5 A
Input Voltage: 100 ~ 240 AC
Output Current: 3 A
Output Voltage: 12 DC
Plug Type: B
Power Consumption: 36 W Max.
Humidity: 20 - 80% RH (Non-condensing)
Specifications: Bus Type: USB 2.0
Chipset ID: FTDI - FT232RL
Interface : Serial
Port Style: External Hub
Ports: 16
Data Bits: 7, 8
FIFO: 256 Bytes
Max Baud Rate: 921.6 Kbps
Maximum Data Transfer Rate: 480 Mbps
Parity: Odd, Even, Mark, Space, None
Serial Protocol: RS-232
Stop Bits: 1, 2
LED Indicators 16 - Data Receive
16 - Data Transmit
Center Tip Polarity: Positive
Input Current: 1.5 A
Input Voltage: 100 ~ 240 AC
Output Current: 3 A
Output Voltage: 12 DC
Plug Type: N
Power Consumption: 36 W Max.
Power Source: AC Adapter Included
Humidity: 20~80% RH (Non-condensing)
Operating Temperature: -40°C to 85°C (-40°F to 185°F)
Storage Temperature: -65°C to 150°C (-85°F to 302°F)
Enclosure Type: Steel
Type: 8-Port Industrial USB to RS-232/422/485 Serial Adapter
Color: Black
Changer Type: USB to RS-232/422/485 Serial
Specifications: Converts a single USB port into eight RS232/RS422/RS485 serial ports over USB 2.0 with four modes: RS232, RS422, 4-wire and 2-wire RS485
15 kV ESD protection (Level 4) against noise emissions and electrical voltage surges
DIN rail and wall mountable
Rugged IP30 rated metal hub housing and screw-locking host connection, ideal for harsh industrial environments
Data transfer baud rate up to 921.6Kbps
Single USB 2.0 hub port (pass-through) for daisy chaining, or for connecting an additional USB device to the host
COM port expansion with COM retention
Self-powered with included external power adapter
Specifications: Connector on First End:1 x Type A Male USB 3.0 USB
Connector on Second End:1 x 40-pin IDC Female IDE
1 x 7-pin Male Serial ATA 3.0 SATA
Package Contents: USB 3.0 to SATA / IDE Combo Adapter
USB 3.0 Cable - 2.5 ft.
4-Pin Molex Power Cable
External Power Supply (Input: 100-240V, 50/60Hz, 0.8A Output: 12V, 2A)
Owner's Manual
Backup Software CD
Specifications: Operating Temperature Range: -4 to 158 F (-20 to 70 C)
Storage Temperature Range: -4 to 185 F (-20 to 85 C)
Relative Humidity: 5% to 90% RH, Non-Condensing
USB Specification: USB 3.1 Gen 1 (up to 5 Gbps)
Specifications: Ports: 2
Bus Type: USB 2.0
Port Style: External Hub
Chipset ID: FTDI - FT232RL
Max Baud Rate: 921.6 Kbps
Maximum Data Transfer Rate: 921.6Kbps
Serial Protocol: RS-232
Data Bits: 7, 8
FIFO: 4096 byte Transmit and Receive
Parity: Odd, Even, Mark, Space, None
Stop Bits: 1, 2
Enclosure Type: Steel
Color: Black
LED Indicators: 2 - Each, Tx/Rx Activity indicators
Power Adapter Included: USB Powered
Operating Temperature: 0 Degrees C to 55 Degrees C (32 Degrees F to 131 Degrees F)
Storage Temperature: -20 Degrees C to 85 Degrees C (-4 Degrees F to 185 Degrees F)
Humidity: 5~95% RH