Specifications: Max 1024 x 768 Range (ft): 150 ft.
Max 480P Range (ft): 154 ft.
Max 1440 x 900 Range (ft): 150 ft.
Max 1080i Range (ft): 150 ft.
Max 1080P Range (ft): 150 ft.
Max 480i Range (ft): 154 ft.
Max 640 x 480 Range (ft): 150 ft.
Max 800 x 600 Range (ft): 150 ft.
Max 1600 x 1200 Range (ft): 150 ft.
Max 720P Range (ft): 150 ft.
Max Extend Distance: CATx: 328 feet. (100 m); single-mode fiber (SFP): up to 30 km
Color: Black
Specifications: HDMI 4K video over IP
This attractively priced IP video distribution solution uses existing standards-based Ethernet technology and TCP/IP protocols to unicast HDMI 4K video signals on your Gigabit Ethernet network. In a multicast configuration, one transmitter can drive multiple receivers with no extra network load.
Plug-and-play setup
Because the transmitter and receiver install directly into your existing LAN infrastructure, integration is easy. And you don't have to configure any IP settings. Connect your source, your display, a network switch, and you're ready go.
PoE support for remote powering
The MediaCento IPX 4K is PoE powered eliminating the need for power supplies. Using a PoE netwo...
Type: DisplayPort Audio/Video with RS-232 Serial and IR Control over IP Receiver
Max Extend Distance: 328 feet
Color: Black
Specifications: Communications:
Max 1024 x 768 Range (ft) 328
Max 480P Range (ft) 328
Max 1440 x 900 Range (ft) 328
Max 1080i Range (ft) 328
Max 1080P Range (ft) 328
Max 1920 x 1440 Range (ft) 328
Max 480i Range (ft) 328
Max 640 x 480 Range (ft) 328
Max 800 x 600 Range (ft) 328
Max 1600 x 1200 Range (ft) 328
Max 1920 x 1200 Range (ft) 328
Max 720P Range (ft) 328
Extends and Distributes DisplayPort A/V, Serial and IR Control Signals over Cat5/6 Cabling
Converts source video to IP-based signal transmitted to and distributed through network switch
Extends signal up to 328 ft. (100 m) from switch
Can also connect directly to transmitter up to 328 ft. away
Designed for Managed Network Switches with IGMP
Allow...
Specifications: Standards and Certifications:
HDCP 1.1
DVI 1.0
CE
FCC
RoHS2
Signal Input/Output:
Input video signal: 0.5 – 1.0 V p-p
Input DDC signal: 5 V p-p (TTL)
Maximum single-link range: 1920 x 1200, 1080p
Output video: HDMI 1.3, HDCP 1.1, DVI 1.0
Frequency: 1.65 Gbps / 165 MHz
Video Resolutions:
VGA: 640 x 480, 800 x 600, 1024 x 768, 1920 x 1200
DTV/HDTV: 480i/480p/576i/576p/720p/1080i/ 1080p