Specifications: NEW 60M HDMI KVM Over Network Extender 4K 60Hz HDMI Transmitter by RJ45 CAT5e CAT6 Extensor Support KVM remote control
Video
Standards: HDMI 2.0; HDCP 2.2 and DVI compliant
Maximum pixel clock: 300MHz
Maximum data rate: 18Gbps
Resolution: 3840 x 2160@60Hz
Connector: HDMI-A
Impedance: 100O
?
Package Contents: HDMI KVM extender transmitter x1
HDMI KVM extender receiver x1
Power adapter x1
User manual x1
Max Extend Distance: Long range transmission:up to 20 km over a single-mode/Multi-mode LC fiber optic cable;
Specifications: 1080P 120Hz HDMI Extender HDMI Over Fiber Converter 4K@60HZ Video Optical Transceiver LC Single Mode 20km Multimode10G SFP
Video
Standards----------HDMI 2.0b; HDCP 2.2
Maximum pixel clock------600MHz
Maximum data rate-------18Gbps
Resolution ------3840X2160P@60Hz
Connector-----HDMI-A
Fiber type
Fiber interface--------------- LC Connector
Transmission distance--------0~20 km over single/multi-mode fiber
Fiber Type---------- ------------------ Single Mode
Wavelength--------------------1310nm 1510nm
Interface Bandwidth--------------18Gbps
Other
Power supply-----The power adapter: DC 5V/2A
Power dissipation------MAX 3W
Temperature-------Operating: -5? ~ +70?
Humidity-------Operating: 5% ~ 90%
Dimension-------104*98*23mm
The warranty----...
Specifications: Supporting a mix of legacy and new laptops in your organization? This USB-C Demultiplexer was engineered to work with Targus USB-C docking stations with Power Delivery (PD). Complete with a USB-C port and two cables - one that transmits power and another that transmits data - it’ll ensure that your non-USB-C legacy laptops are compatible with the Targus USB-C Universal DV4K Docking Station (DOCK180USZ). That way, you’ll have full support through your laptop refresh cycle.
Specifications: NEW 60M HDMI KVM Over Network Extender 1080P HDMI Transmitter by RJ45 CAT5e CAT6 Extensor Support KVM remote control
Video
Standards: HDMI 1.4b; HDCP 1.4 and DVI compliant
Maximum pixel clock: 300MHz
Maximum data rate: 10.2Gbps
Resolution: 1920X1080P@60Hz
Connector: HDMI-A
Impedance: 100O
Package Contents: HDMI KVM extender transmitter x1
HDMI KVM extender receiver x1
Power adapter x1
User manual x1
Max Extend Distance: CATx: 328 feet. (100 m); single-mode fiber (SFP): up to 30 km
Color: Black
Specifications: HDMI 4K video over IP
This attractively priced IP video distribution solution uses existing standards-based Ethernet technology and TCP/IP protocols to unicast HDMI 4K video signals on your Gigabit Ethernet network. In a multicast configuration, one transmitter can drive multiple receivers with no extra network load.
Plug-and-play setup
Because the transmitter and receiver install directly into your existing LAN infrastructure, integration is easy. And you don't have to configure any IP settings. Connect your source, your display, a network switch, and you're ready go.
PoE support for remote powering
The MediaCento IPX 4K is PoE powered eliminating the need for power supplies. Using a PoE netwo...
Specifications: Interfaces
Serial
4 x Programmable Bi-directional RS-232/422/485 Port
(4 x DB9 Male Connector, configurable via pin assignments);
Baud Rate: 300 to 115200 (default: 9600);
Data Bit: 8 (default) or 7;
Stop Bit: 1 (default) or 2;
Parity: None (default), Even or Odd;
Flow Control: None (default) RTS/CTS
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A
Power: Consumption 5 VDC, 7.5 W(adapter) ; 48VDC, 9.5 W(PoE, PoE 802.3 AF/AT compatibility)