Specifications: 1. HDMI resolution supports: 1080p@50/60Hz, 1080i@50/60Hz, 720p@50/60Hz, 576p@50Hz, 576i@50Hz, 480p@60Hz, 480i@60Hz
2. Audio format supports: DTS-HD/D o l b y-trueHD/DTS/D o l b y-AC3/ DSD.
4. Supports 3D(Note: To get 3D, all units connected to the extender must support 3D)
5. Transmission bandwidth: 1.65Gbps
6. HDMI cable length: AWG26 HDMI cable up to 8.0 meters(xx ft)
7. Power Supply: DC 5V/1A(2pcs)
Specifications: 1. HDMI resolution supports: 1080p@50/60Hz, 1080i@50/60Hz, 720p@50/60Hz, 576p@50Hz, 576i@50Hz, 480p@60Hz, 480i@60Hz
2. Audio format supports: DTS-HD/D o l b y-trueHD/DTS/D o l b y-AC3/ DSD.
4. Supports 3D(Note: To get 3D, all units connected to the extender must support 3D)
5. Transmission bandwidth: 1.65Gbps
6. HDMI cable length: AWG26 HDMI cable up to 8.0 meters(xx ft)
7. Power Supply: DC 5V/1A(2pcs)
Specifications: Video
Standards: HDMI 1.3; HDCP 1.2
Maximum pixel clock: 165MHz
Maximum data rate: 6.75Gbps
Resolution: 1920X1080P@60Hz
Connector: HDMI-A
Impedance: 100O
IR
Interface: 3.5mm seat
Signal direction: directional
Signal type: Digital
IR frequency: 20~60 KHz ;
UTP
Interface: RJ45/IEEE-568B
Transmission distance: CAT5e:50m/164ft,CAT6:60m/ 196ft
Other
Power supply: The power adapter: DC 5V/1A
Power dissipation: MAX 3W
Temperature: Operating: -5? ~ +70?
Humidity: Operating: 5% ~ 90%
Dimension: 94*71*25mm
The warranty: 1 year free warranty
Specifications: Interfaces
Relay
8 normally open relays (8 x 2-pole terminal block)
Contact Rating: Max 24 VDC, 2A
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A (Firmware upgrade only)
Power
Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility)
Output 12 VDC, 300 mA