Specifications: Simply pull the connector down over the cable jacket so that the insulated wiring goes through nose of the plug.
Inspect the wiring prior to crimping the connector. It's done in one step with the EZ-RJ45 Crimp Tool.
Make faster terminations and reduce wasted crimps and scraps.
Backward compatible with CAT5e and CAT3
Specifications: Once crimped, the strain-relief boot becomes an integral part of the connector and will not pull off.
Achieve peak performance. Once crimped, the primary strain relief relaxes slightly to decrease cable pair compression.
Snag-proof design makes plugging/unplugging much easier.
Maximum cable jacket outer diameter is 0.235".
UL listed and RoHS compliant.
Specifications: Simply pull the connector down over the cable jacket so that insulated wires go through the nose of the plug. Inspect the wiring prior to crimping the connector. It's done in one step with the EZ-RJ45 Crimp Tool. Make faster terminations and reduce wasted crimps and scraps. Backward compatible with
Specifications: Serial Port
Ports: 8
Protocol: RS232
Connector: DB9 Connector - 9 Pin Male
Tx FIFO Size: 2048
Rx FIFO Size: 2048
Operating Distance: EIA - RS232 Standard
Cable: USB cable (Powered via industrial locking connector with 5V 3A power adaptor - supplied)
Serial Port Settings
Max Baud Rate: 1,000,000 (1 MegaBaud)
Data Bits : 5,6,7 or 8
Parity: Odd, Even, None, Mark or Space
Stop Bits: 1, 1.5 or 2
Flow Control: RTS/CTS, DSR/DTR, XON/XOFF
Tx/Rx Modes: Point to Point
Power
Power Input: 5 - 30V DC input, reverse polarity protected
Power Supply 1 Description: Global Power Supply - PW-800
Power Consumption: 1.93W (Typical)
General
PCB Layers : 4
Operating Temperature Range: -30 °C to +80 °C / -22 °F to +176 °F
Operating Systems
Microsoft Windows 10
Microsoft Windows 8 32 bit & 64 bit Edition...