Microphones

• Brand: HyperX
• Part Number: 4P5P6A6#ABA
• Weight: 0.5500 lb
• Model #: 4P5P6A6#ABA

• Model #: ESPMICPNMAR1405

• Model #: CHMICSCMAY1814

(3)

• Type: Microphone
• Model #: 4P5P8AA

• Model #: CHMICSCMAY1838

(2)

• Type: Microphone
• Frequency Response: 20Hz - 20kHz
• Sensitivity: -36dB (1V/Pa at 1kHz)
• Power Consumption: 5V 220mA (white light)
• Model #: 4P5P7AA

• Model #: ESPMICPNMAR1414

• Model #: CHMICSCMAY1810

• Model #: CHMICSCMAY2048

• Model #: ***dup***

• Type: Wireless Microphone Systems
• Model #: ATW-1101/H92

• Part Number: 519P0AA
• Type: Microphone
• Weight: 0.5600 lb
• Model #: 519P0AA

• Model #: CHMICSCMAY2056

• Type: Wireless Microphone Systems
• Power Supply: Microphones use one 9 volt battery each, not included.
• Dimension: 11.12" x 1.75" x 4.75" (L x W x H)
• Package Contains: Wireless Receiver 2 x Professional Microphones
• Model #: SC-900

• Model #: DHXR/HH65SCD

• Model #: DHXR/HH65SCN

• Model #: 699Z0AA

• Type: Microphone
• Specification: Element: Condenser Polar Pattern: Cardioid Power Requirements: USB Power (5V DC) Bit Depth: Up to 24 bit Sample Rate: 44.1 kHz/48 kHz/96 kHz/192 kHz Volume Control: Headphone volume controlled by up/down buttons Headphone Output Power: 10 mW@16 ohms Headphone Jack: 3.5 mm TRS (stereo)
• Frequency Response: 30 - 15kHz
• Package Contains: Pivoting stand mount for 5/8"-27 threaded stands Tripod desk stand 2 m (6.6') USB-C to USB-C cable (USB On-The-Go Compliant) 2 m (6.6') USB-C to USB-A cable
• Model #: ATR2500X-USB

• Model #: HS2-PL

• Model #: CHMICSCMAY1954

• Series: Blue Yeti
• Type: Microphone
• Specification: Host Interface: Mini-phone USB Sound Mode: Stereo Connectivity Technology: Wired Microphone Technology: Condenser Microphone Type: Stand Mountable Shock Mount
• Polar Pattern: Omni-directional Cardioid Bi-directional
• Model #: 988-000229

• Type: Others
• Package Contains: Includes: Microphone Receiver Wireless Antenna Cable
• Model #: M-310

• Type: Condenser Microphones
• Frequency Response: 20Hz-20kHz
• Model #: WA87R2B

• Accessory Type: Other
• Dimension: 5.12" x 8.66" x 8.27" (H x W x D)
• Weight: 0.57lb
• Model #: SMR

• Type: Condenser Microphones
• Accessory Type: Other
• Output Impedance: 200 ohms
• Outputs: XLR
• Model #: K2

• Type: Condenser Microphones
• Output Impedance: 50 ohms
• Outputs: XLR
• Polar Pattern: Supercardioid
• Model #: M2

• Model #: TRX-M3PLUS

• Type: Headphones
• Model #: 981-000510

• Part Number: 499862
• Type: Condenser Microphones
• Polar Pattern: Supercardioid
• Frequency Response: 40 - 20,000 Hz
• Model #: 499862

• Type: Wireless Microphone Systems
• Model #: ATW-1101/L

• Model #: CLOCL2

• Type: Dynamic Microphones
• Specification: Acoustic Principle: Dynamic Directional Pattern: Cardioid
• Output Impedance: 320 Ohms
• Outputs: 3 pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground)
• Model #: PROCASTER

• Type: Microphone
• Specification: Acoustic Principle: Dynamic Active Electronics: Analogue signal conditioning + A/D and USB interface Maximum SPL: 115dB (@ 1kHz, 1% THD into 1kOhms load) Directional Pattern: Cardioid Resolution: 18bits Signal/Noise: 78dB SPL (A - weighted per IEC651)
• Output Impedance: 0 Ohm
• Outputs: USB output x 1 Headphone audio output x 1
• Model #: PODCASTER

• Type: Condenser Microphones
• Specification: ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20,000 Hz OPEN CIRCUIT SENSITIVITY: -37 dB (14.1 mV) re 1V at 1 Pa IMPEDANCE: 100 ohms MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T.H.D. NOISE: 20 dB SPL DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical OUTPUT CONNECTOR: Integral 3-pin XLRM-type
• Dimension: 6.38" (Long) x 2.05" (maximum body diameter)
• Weight: 0.76 lb.
• Model #: AT2020

• Series: Cloudlifter
• Specification: Patent Pending Class A, Discrete JFET circuitry
• Output Impedance: 3Kohms
• Model #: CL-1

OUT OF STOCK

• Model #: BLUEYETI