Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 3.3ft LED numbers: 60 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
Specifications: Strip Length:19in per strip
Input Voltage:DC 5V Only support DC5V ,don't support DC12V
Waterproof Grade:IP30
Double-sided adhesive
Powered by 5V 3-pin RGB header on your computer motherboard
Please make sure it is 3-PIN RGB header on your computer motherboard before you buy this PC strip kit.
Specifications: Material: Steel, plastic
Application: Tower case with 7 expansion slots and a power shroud, Tower case with 8 expansion slots
Bearing: Hydraulic bearing
Rated Current: 12V
Speed: 1500 RPM
Dimension: 66 x 127 x 124mm
Weight: 300g
Specifications: Application: For Digital-RGB equipped Cases, Controllers and Motherboards. (+5V, Data, NA, GND)
Color: Full RGB color spectrum
Connections:
Input: Phanteks 3-pin (female) connector
Output: Phanteks 3-pin (male) connector
Input Voltage: +5V
Current (Single strip): Max. 1.14A
Wattage (Single strip): Max. 5.7W
Cable compatibility: For Phanteks Digital-RGB LED system, For M/B Only with Digital-RGB Pin Header (+5V,DATA,NA,GND)
LED Color/ Controller: KS6812, Full Color Digital-RGB LED Chip
LED Number: 38 LEDs (550mm NEON Digital-RGB LED Strip)
MTBF: 20,000 hrs
Product Dimensions: 550 x 13 x 5.5mm (21.7 x 0.5 x 0.2in)
Scope of Delivery:
1 x 550mm (21.7in) PHANTEKS NEON Digital-RGB LED Strip
1 x 600mm (23.6in) M/B Digital-RGB adapter/Extension
3 x 90 degree mount
3 x 180 de...
Specifications: IMPORTANT NOTE: This vertical graphics card holder kit is designed for standard ATX chassis with at least 7 available PCI slots & You need to GIVE UP the access to these 7 PCI slots at the back panel of your chassis.
Specifications: Materials: ABS Plastic, Tempered Glass
Dimensions: 58 x 58 x 177mm / 2.29" x 2.29" x 6.97" (Incl. Protrusions)
Included Accessories:
ARGB GPU Support Bracket
ARGB 3-Pin
Manual
Specifications: LED: Blue LED Power Indicator
Material: Plastic
Power Connector Required: 1x SATA
Fans Ports: 10
Fan Connector Supported: 3-pin / 4-pin (3-pin not supported for PWM Function)
PWM Signal Input: 4-pin PWM Connector
Weight: 90g
Color: Black
Dimensions (L x W x H): 81 x 44 x 18 mm (3.2" x 1.75" x .70")
Specifications: Color: Black
Connectors: PWM 4pin connector x 1 to motherboard
SATA power cable x 1 to PSU
PWM 4pin header x 8, compatible with 3pin cable*
Length
PWM cable 500mm, SATA power cable 300mm
Capacitor size
2200µF
Dimension
54mm (W) x 19mm (H) x 40mm (D)
Specifications: Included Accessories: 1 x 300 mm Extension cable, 1 x 100 mm Extension cable
LED Strip Length: 300 mm, 10-LED
LED Strip Width: 10mm
LED Color: Color Changing RGB
Mounting: 3M Double sided tape & Magnets
Cable Finish: Black rubber
System Requirements: Requires HUE+ Advanced PC Lighting device to operate. Sold Separately