Specifications: Dimensions: 2.91" x 0.59" x 2.52" (WxHxD)
Weight: 0.14 lbs.
Mounting: Magnet / Velcro
Control Method: NZXT CAM software
Connections:
Internal-USB Cable - x1
SATA Power Cable - x1
Fan Splitter Cables - 3x 1 to 3 split
Input Connector: 12V DC / 2.6A
Output Channel Voltage: 5V DC
Output Channels:
2 x RGB Lighting Channels
3 x Fan Channels
LED Color: RGB
LED Modes: Preset, Smart, Custom, Audio, Game
Included Accessories:
2 x Magnet
2 x 3M Velcro
Specifications: Unit Dimension: 15.50 x 69.00 x 133.00mm
Power Input:
Logic: 2.97V to 3.63V, 4.5V to 5.5V
Fan: 11.4V to 12.6V
RGB LED: 4.5V to 5.5V
Cable:
USB: 440mm
SATA Power: 465mm
Thermal sensor: 610mm
Fan extension: 300mm
RGB LED channels: Two 2-pin connector
Max. RGB LED strip per channel: 4
Max. RGB fan per channel:6 through 1 RGB LED hub
Specifications: Hot-pluggable fan module assembly - Includes the locking latch - Four are used when one processor is installed and six are used when two processors are installed
Specifications: Material: Plastic outer shell
Output limitation (each port):
Addressable RGB port: 72 LED per port, total 5V, 5A
Fan Port : total 12V, 3A
Color Selection: Support 2812 IC Addressable RGB LED
Signal output:
Standard Addressable RGB 3pin + 4-1pin x 6*
Fan 4pin port x 4 (compatible with 3pin)
Included Parts:
6 x Standard Addressable RGB cable
1 x Peripheral power Y cable
1 x RF remote
1 x Thermal sensor cable
1 x Power switch cable
Specifications: Unit Dimension: 15.50 x 69.00 x 133.00mm Power Input: Logic: 2.97V to 3.63V, 4.5V to 5.5V Fan: 11.4V to 12.6V RGB LED: 4.5V to 5.5V Cable: USB: 440mm SATA Power: 465mm Thermal sensor: 610mm Fan extension: 300mm RGB LED channels: Two 2-pin connector Max. RGB LED strip per channel: 4 Max. RGB fan per channel:6 through 1 RGB LED hub
Specifications: Screw 6-32 x .25": Used in PC case cover and I/O plates
Screw 6-32 x .15": Used to install hard drives
Screw M3 x .25": Used to install floppy drive, CD-ROM drive and motherboard
Screw 4-40 x .18": Used in I/O plate connector
Metal Jackscrew Standoffs 6-32 to M3: Used in motherboard installation and pre-taped PC chassis
Metal Jackscrew Standoffs 4-40: Used in I/O plate connector
Case fan screw: Used to install plastic-framed cooling fans to PC chassis
Nuts 4-40 x 6 mm: Used in joining cables
Nuts 4-40 x 1.6 mm: Used in screw 4-40
AT-style PC Case Standoffs: Used to install motherboards to a PC chassis
Pre-Trapped PC Case Standoffs: Used to install motherboards to a pre-trapped PC chassis
ATX-style PC Case Standoffs: Used to install motherboards to a PC chassis
Case Dimension...
Specifications: Type: 3 Strip RGB LED Control Pack
Form Factor: Slim Profile
Voltage: 12V
LED Strips: (3) RGB Magnetic LED Strip
Mounting: 6 Neodymium Magnets + 3M Adhesive
LED Lights/Strip: 12
Fans Channels: 5
LED Modes: Flash Mode (Blue > Green > Red > White > Orange > Yellow > Purple) and 256 Color Fade Mode
Buttons:
Customize Button (256 Color Mode)
Mode Button (Color Select/Flash)
Brightness Button (Adjust Brightness Levels / Power On/Off)
LED Strip Chaining Capable: Yes
Power Connector: (1) 4-pin Fan Header
Weight: 145g
Color: Black
Dimensions: 80 x 60 x 20 mm