Specifications: Unit Dimension: 15.50 x 69.00 x 133.00mm Power Input: Logic: 2.97V to 3.63V, 4.5V to 5.5V Fan: 11.4V to 12.6V RGB LED: 4.5V to 5.5V Cable: USB: 440mm SATA Power: 465mm Thermal sensor: 610mm Fan extension: 300mm RGB LED channels: Two 2-pin connector Max. RGB LED strip per channel: 4 Max. RGB fan per channel:6 through 1 RGB LED hub
Specifications: Adjustable computer stand is designed to support and elevate most desktop / tower style computers. Increases airflow and saves desktop space by storing the CPU under or beside your desk.
Width is easily adjustable from 7" to 12" (17.5cm to 30.5cm) width to hold most computers, no tools needed
5 locking and swiveling casters provide mobility and stability. Rolls for easier access to back of the computer
Rubber pads on clamps provide a firm grip on your CPU and protects it from scratching and scuffing.
Specifications: Material 12 pcs addressable RGB LED with magnetic strip and adhesive tape
Pin definition:
+5V, D, G*
+5V, D, NP, G*
Included Parts:
2 x Addressable RGB LED strip
1 x Motherboard connect cable**
1 x Splitter cable
Length: 300mm
Wattage: 3W (5V, 0.6A)
Tandem limits: Depend on controller
Remark:
* Please check the control box and motherboard pin header that you want to connect are the same as LS03’s pin definition.
** Included Motherboard connect cable supports SilverStone’s addressable RGB 3pin connectors and other market standard addressable RGB 3pin (three pin in four pin housing) connectors.
Specifications: Screw 6-32 x .25": Used in PC case cover and I/O plates
Screw 6-32 x .15": Used to install hard drives
Screw M3 x .25": Used to install floppy drive, CD-ROM drive and motherboard
Screw 4-40 x .18": Used in I/O plate connector
Metal Jackscrew Standoffs 6-32 to M3: Used in motherboard installation and pre-taped PC chassis
Metal Jackscrew Standoffs 4-40: Used in I/O plate connector
Case fan screw: Used to install plastic-framed cooling fans to PC chassis
Nuts 4-40 x 6 mm: Used in joining cables
Nuts 4-40 x 1.6 mm: Used in screw 4-40
AT-style PC Case Standoffs: Used to install motherboards to a PC chassis
Pre-Trapped PC Case Standoffs: Used to install motherboards to a pre-trapped PC chassis
ATX-style PC Case Standoffs: Used to install motherboards to a PC chassis
Case Dimension...
Specifications: Strip Length:19in per strip
Input Voltage:DC 5V Only support DC5V ,don't support DC12V
Waterproof Grade:IP30
Double-sided adhesive
Powered by 5V 3-pin RGB header on your computer motherboard
Please make sure it is 3-PIN RGB header on your computer motherboard before you buy this PC strip kit.
Specifications: Display stand: 145 x 266 x 459 mm (5.7" x 10.47" x 18.07")
Bottom cover panel: 55 x 281 x 342 mm (2.17" x 11.06" x 13.46")
Net Weight: 1.1kg / 2.43 lbs.
Specifications: Display stand: 145 x 266 x 459 mm (5.7" x 10.47" x 18.07")
Bottom cover panel: 55 x 281 x 342 mm (2.17" x 11.06" x 13.46")
Net Weight: 1.1kg / 2.43 lbs.