DIY Cooling

(1)

• Multi-channel Kit: Dual Channel Kit
• Brand: V-Color
• Series: XSky RGB
• Heat Spreader: Yes
• Model #: TMXSL00WWK

• Type: Hi-Res Display
• Color: White
• Specification: Connection Type: HDMI, USB Power Display Size: 5.5" IPS Display Resolution: 2160x1440 Color Spectrum: sRGB99% Housing Color: White Refresh Rate: 60hz
• Package Contents: Phanteks 5.5" Hi-Res Display 4x Fan Screws 4x M4 Screws 1x SATA to Micro USB Type B Cable 1x HDMI Cable 2x Feet
• Model #: PH-HRLCD_WT01

• Type: Heatsink
• Block Compatibility: 2280 M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x6mm
• Model #: HS22x70x6

Limited time offer, ends 08/31

• Model #: 11-001-062

Limited time offer, ends 08/26

• Model #: M.2-SSD Heatsink

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

Limited time offer, ends 08/31

• Model #: 11-001-359

Limited time offer, ends 08/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 08/31

• Model #: 11-001-330

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20x20x6mm,Please check your component dimension carefully,and make sure size of the heatsink fits it no problem. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm Weight: 35g Package Content: 10pcs x Heatsink
• Dimensions: 20mm x 20mm x 6mm
• Model #: 11-001-258

Limited time offer, ends 08/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification product name: Heatsink; Material : Aluminium Color : Black Overall Size : 40 x 40x 11mm/ 1.6" x 1.6" x 0.49" (L*W*H) Weight : 33g Package Content : 2 x Heatsink
• Dimensions: 40 x 40x 11mm
• Model #: 11-001-191

Limited time offer, ends 08/31

• Model #: 11-001-325

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink Material : Aluminium Color : Silver Tone Overall Size : 14 x 14x 6mm/ 0.55" x 0.55" x 0.24" (L*W*H) Weight : 100g Package Content : 50 x Heatsink
• Dimensions: 14 x 14x 6mm
• Model #: 11-001-192(50)

Limited time offer, ends 08/31

• Model #: 11-001-362-5CM

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

Limited time offer, ends 08/31

• Model #: 11-001-362-4CM

• Model #: BPTA-PFANMFH

• Brand: Watercool
• Model: 30061
• Part Number: WAT-0498
• Color: Black
• Model #: 30061

• Type: CPU Block
• Model #: 1023311

Limited time offer, ends 08/23

• Part Number: AD-M2CL2PC
• Type: cooler
• Features: Features : Copper Heatsinks Cooling Fin for M.2 2280 SSD Main Body Material: 100% copper, cut andpolished,High performance Thermal Heatsink; Suitable for NVME M.2 SSD Laptop, AHCI M.2SSD and Sata-based M.2 SSD Compatible PCIe NVMe M.2 SSD brand andmodels (List only part of them): - 850EVO / 860EVO / 960EVO /950PRO / 960PRO / SM951
• Package Contents: 2 x M.2 SSD HeatSink(Copper) 2 x m.2 thermal pads(0.5mm/1mm) 4 x Rubber Rings
• Model #: AD-M2CL2PC

• Type: Chipset Block
• Model #: 1022619

• Brand: Thermal Grizzly
• Model: TG-MP8-100-100-05-1R
• Part Number: TG-MP8-100-100-05-1R
• Color: Pink
• Model #:

• Brand: Alphacool
• Model: 13295
• Part Number: 1012971
• Type: Pump
• Model #: 13295

• Type: Fittings
• Model #: 4250197175968

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink; Material : Aluminium Color : Silver Tone Overall Size : 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H) Weight : 410g Package Content : 1 x Heatsink
• Dimensions: 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H)
• Model #: 11-001-331

Limited time offer, ends 08/23

• Brand: Adiven
• Type: cooler
• Features: Designed for M.2 SSD: The NVME Heat Sink is specially designed for M.2 2280 SSD, which is very suitable for Laptop, Desktop Computers/PS5, etc. 10-30°C Cooling Effect: Pure Copper coverd by Graphite, Copper(401 W/mK) has better heat dissipation than aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer. Comes with Thermal Pad, Rubber Rings and bandages: thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. The bandages can bear...
• Model #: AD-M2CL722

• Brand: Alphacool
• Model: 1019925
• Part Number: 1019925
• Color: Black
• Model #: 1019925

• Type: CPU Block
• Model #: WAT-0367

• Brand: Alphacool
• Model: RNAB0B1415G1W
• Color: Black
• Heatsink Material: Copper
• Model #: RNAB0B1415G1W

• Brand: Thermal Grizzly
• Model: TG-MP-B-120-20-05-4
• Part Number: TG-MP-B-120-20-05-4
• Color: Black
• Model #:

• Brand: Alphacool
• Model: 1024292
• Part Number: 1024292
• Color: Chrome
• Model #: 1024292

• Brand: Watercool
• Model: WAT-0018
• Part Number: WAT-0018
• Color: Silver
• Model #: WAT-0018

• Brand: Alphacool
• Model: 1022218
• Part Number: 1022218
• Color: Black
• Model #: 1022218

• Type: CPU Block
• Model #: B-DTH-K40-V5

• Brand: Thermal Grizzly
• Model: TG-MP8-100-100-05-2R
• Part Number: TG-MP8-100-100-05-2R
• Color: Pink
• Model #: TG-MP8-100-100-05-2R

• Brand: Alphacool
• Model: 1022268
• Part Number: 1022268
• Color: Black
• Model #: 1022268