DIY Cooling

• Type: CPU Block
• Model #: B-HHDR

• Type: CPU Block
• Model #: B-3090TC-X-NE

• Type: CPU Block
• Model #: N-GV5090DWF-X-V2

• Brand: Aquacomputer
• Model: 53067
• Part Number: 71160
• Type: Indicator
• Model #: 53067

(19)

• Type: Fittings
• Color: Green
• Tube Dim.: Dimension: 26 (D) x 21 (H) (mm) Applicable: OD : 16 mm Screw Thread: G 1/4 Note: PETG Tube to G1/4
• Tube Material: CU + AL
• Model #: CL-W212-CU00GR-B

• Type: CPU Block
• Model #: RMSX14CK-SW

Limited time offer, ends 08/31

• Model #: 11-001-330

• Type: CPU Block
• Model #: 6932167224453

Limited time offer, ends 08/31

• Brand: EN-Labs
• Model #: 36WPCICON5D

• Type: CPU Block
• Model #: N-MS5090DTRIO-X

Limited time offer, ends 08/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 08/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

• Brand: Thermal Grizzly
• Model: TG-MP8-30-30-10-1R
• Part Number: TG-MP8-30-30-10-1R
• Color: Pink
• Model #:

• Type: Reservoir
• Model #: YPH65-220 V2

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

• Type: Liquid Cooling System
• Fan Size: No Fans
• Model #: A-XF6900XT-X_RBW

• Type: Coolant
• Model #: 5060681981208

• Brand: Alphacool
• Model: 1026350
• Part Number: 1026350
• Block Material: Copper
• Model #: 1026350

(25)

• Type: Distro-Plate with Pump Combo
• Pump Dim.: 360 (L) x 120 (W) x 84.8 (H) mm
• Reservoir Capacity: 200 ml
• Specification: Dimension: 360mm(L) x 120mm (W) x 84.8mm (H) Material: PMMA Capacity: 200ml Maximum Flow Rate: 1135 L/h Maximum Pressure: 50 pSI Input Voltage: 12V / 5V Power Input: 37W / 3.5W Connector: 4-pin Peripheral Port Thread: G 1/4" Pump Speeds: 1800 RPM/2550 RPM/3300 RPM/4050 RPM/4800 RPM
• Model #: CL-W263-PL00SW-A

• Type: CPU Block
• Model #: RTP14M-630

• Type: CPU Block
• Color: Frosted
• Model #: RT14MA-430-F

Limited time offer, ends 08/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

• Model #: SU1225FD12H-RP

(3)

• Type: Fittings
• Model #: CL-W092-CA00BL-A

• Model #: 43054120304809

• Type: CPU Block
• Color: Yellow
• Model #: PFLEXA10-34-PUY

• Type: CPU Block
• Color: Black
• Model #: B-HTJV2-L16-BK

Limited time offer, ends 08/31

• Model #: 11-001-235

Limited time offer, ends 08/31

• Type: Fan splitter cable
• Length: 6 inches
• Connector Number: 3
• Model #: 121014

(1)

• Type: Reservoir
• Model #: BP-WTH34AC-DRGB

• Type: CPU Block
• Model #: F-RSX12-UPK-6

• Brand: Thermal Grizzly
• Model: TG-AD-AM5-MK
• Part Number: TG-AD-AM5-MK
• Color: Black
• Model #:

• Type: CPU Block
• Color: White
• Model #: 6973826689930

(1)

• Model #: 6XY-06XYTBKD8

• Brand: Thermal Grizzly
• Model: 4260711990755
• Part Number: TG-DDM-i13G
• Color: Black
• Model #: 4260711990755

• Type: CPU Block
• Model #: F-RSX12-SW-12