DIY Cooling

• Block Compatibility: M.2 SSD
• Model #: Heatsink 22x70x3

• Block Compatibility: M.2 2280 SSD
• Block Material: Aluminum
• Radiator Material: Aluminum
• Parts: 1 Year
• Model #: 2 x HS 70x22x3

Limited time offer, ends 07/05

• Type: M.2 Heatsink NVMe SSD PS5 Heat Sink
• Model #: BL-M2CL-PT

Limited time offer, ends 07/06

• Model #: M.2-SSD Heatsink

Limited time offer, ends 07/31

• Model #: 11-001-024

• Type: Heatsink
• Block Compatibility: 2280 M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x6mm
• Model #: HS22x70x6

Limited time offer, ends 07/31

• Model #: 11-001-061

• Model #: SXD8025M12B 3pin

• Type: Coolant
• Model #: MX1UVPU250

Limited time offer, ends 07/31

• Model #: 11-001-195

(5)

Limited time offer, ends 07/05

• Parts: 1 Year
• Labor: 1 Year
• Model #: Heatsink880X

Limited time offer, ends 07/31

• Model #: 11-001-127

• Block Compatibility: M.2 2280 SSD
• Block Material: Aluminum
• Model #: KINGSHARE M.2 2280 Heat Dissipation

• Model #: 1-Water-Cooling1453

• Type: Coolant
• Model #: MX1C1LTR

• Model #: 1-Com-Cooler3089

• Model #: BestAdapter-18

• Model #: 649823636302

• Model #: 6402411563770ASDFA6081687

• Model #: 5060681981086

• Model #: 1-CaseFans0580

• Type: Coolant
• Model #: MX1UVG1LTR

• Model #: 5060681981116

Limited time offer, ends 07/31

• Model #: 11-001-289

Limited time offer, ends 07/31

• Model #: 11-001-362-6CM

Limited time offer, ends 07/31

• Model #: 11-001-360

Limited time offer, ends 07/31

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

Limited time offer, ends 07/31

• Model #: 11-001-100

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Type: CPU Block
• Model #: RGV-LAN-O11XL-P-K

• Model #: 649823635749

• Model #: 5060681980805

• Model #: 5060681981161

• Model #: MYH-0244

• Type: CPU Block
• Model #: B-RAM-D4-X-V2

(1)

• Multi-channel Kit: Dual Channel Kit
• Brand: V-Color
• Series: XSky RGB
• Heat Spreader: Yes
• Model #: TMXSL00WWK