DIY Cooling

• Model #: 1-Water-Cooling0585

• Model #: 1-CaseFans0566

• Type: Fittings
• Features: Dimension: ?25 x 24.7 (H) (mm) Applicable: OD : 5/8” ( 15.9 mm ) ID : 1/2”( 13 mm ) Weight: 55 g Material: CU Screw Thread: G 1/4 Note: Connector To Tube
• Model #: CL-W031-CA00SL-A

• Model #: 14622

Limited time offer, ends 09/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

• Model #: 14621

(39)

• Type: Water Cooling Kit
• Block Compatibility: Intel LGA 2066 / 2011 / 1700 / 1366 / 1156 / 1155 / 1151 / 1150 / 775 AMD AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Pump Dim.: 86.54 (L) x 62 (W) x 140.1 (H) mm
• Radiator Size: 279.00 x 119.00 x 29.50 mm
• Model #: CL-W242-CU12SW-A

Limited time offer, ends 09/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 09/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20x20x6mm,Please check your component dimension carefully,and make sure size of the heatsink fits it no problem. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm Weight: 35g Package Content: 10pcs x Heatsink
• Dimensions: 20mm x 20mm x 6mm
• Model #: 11-001-258

• Model #: 1-Com-Cooler1585

Limited time offer, ends 09/19

• Model #: C72J-Y-0973-2IN1

• Type: CPU Block
• Model #: 4250197138512

Limited time offer, ends 09/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

• Model #: DEETB0D9FWHTBT

Limited time offer, ends 09/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Model #: 652843973241

Limited time offer, ends 09/30

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Model #: 1-Water-Cooling1475

Limited time offer, ends 09/19

• Model #: 27-Com-Cooler0490

• Model #: DEETB0GBVY6DPS

• Model #: 1-Com-Cooler1341

Limited time offer, ends 09/20

• Model #: C2AG-0113-c2

• Model #: DF-12025-ARGB-251

Limited time offer, ends 10/12

• Model #: 1-Com-Cooler0807

Limited time offer, ends 09/30

• Color: Silver
• Compatibility: VGA Chipsets
• Features: Aluminum heatsink are generally used in the heat treatment and the fins increase the area of the board and thus provide for greater heat transfer. GPU graphics card Cooling Heatsink Kit is a fan-less cooling solution to any GPU, graphics card, video card. And,Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name :GPU Video Card Heatsink; Material : Aluminium Color : Silver Tone Package Content : 15 pieces - 8.8mmx8.8mmx5mm Heatsink 10 pieces - 14mmx14mmx6mm Heatsink 8 pieces - 20mmx14mmx6mm Heatsink
• Dimensions: 15 pieces - 8.8mmx8.8mmx5mm Hea...
• Model #: 11-001-128

Limited time offer, ends 09/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H) Weight: 5...
• Model #: 11-001-329

• Model #: DEETB0DJZRFK5G

• Model #: DEETB0DWZDTQYT

• Model #: DEETB0CW19427S

Limited time offer, ends 09/30

• Model #: 11-001-014

Limited time offer, ends 10/12

• Model #: 1-Com-Cooler1325

• Model #: 27-Com-Cooler1631

• Model #: DEETB0D2DGWCQB

Limited time offer, ends 09/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 14mm x 14mm x 10mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14 x 14 x 10mm/ 0.55" x 0.55" x 0.4" (L*W*H) Weight: 55g Package Content: 20pcs x Heatsink
• Dimensions: 14 x 14 x 10mm
• Model #: 11-001-322

• Model #: 1-CaseFans0759

• Model #: DEETB0FFWXMQ51