DIY Cooling

(39)

• Type: Liquid Cooling System
• Block Compatibility: Intel LGA 2066 / 2011 / 1700 / 1366 / 1156 / 1155 / 1151 / 1150 AMD AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Fan RPM: PWM 500~2000 R.P.M With L.N.C PWM 500~1500 R.P.M
• Color: Black
• Model #: CL-W306-CU12BL-A

• Type: CPU Water Block
• Block Compatibility: AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1700
• Color: White
• LED Color: RGB
• Model #: CX-9010024-WW

• Brand: Watercool
• Model: 30263
• Part Number: WAT-0099
• Type: Reservoir
• Model #: 30263

(8)

• Type: Pump
• Block Material: POM+ PMMA
• Pump Dim.: 247mm (L) x 81mm (W) x 65.9mm (H)
• Pump Capacity: 400 ml
• Model #: CL-W001-PL00BL-A

(4)

• Type: CPU Block
• Block Compatibility: Intel LGA: 2011/1366/1155/1156/1150 AMD: FM2/FM1/AM3+/AM3/AM2+/AM2
• Block Dim.: 1.11" x 3.50" x 3.57"
• Block Material: Copper
• Model #: CL-W027-CU00BL-A

(2)

• Type: Water Blocks
• Block Compatibility: Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/ 1150
• Block Dim.: 16mm (L) x 54mm (W) x 60mm (H)
• Block Material: Anti-Corrosive Nickel Plated Copper
• Model #: CL-W022-CU00BL-A

• Type: Indicator
• Model #: 10196

Limited time offer, ends 09/15

• Model #: 1-Com-Cooler1587

Limited time offer, ends 09/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

Limited time offer, ends 09/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

• Model #: DEETB0DR2L84SG

(25)

• Type: Distro-Plate with Pump Combo
• Pump Dim.: 360 (L) x 120 (W) x 84.8 (H) mm
• Reservoir Capacity: 200 ml
• Specification: Dimension: 360mm(L) x 120mm (W) x 84.8mm (H) Material: PMMA Capacity: 200ml Maximum Flow Rate: 1135 L/h Maximum Pressure: 50 pSI Input Voltage: 12V / 5V Power Input: 37W / 3.5W Connector: 4-pin Peripheral Port Thread: G 1/4" Pump Speeds: 1800 RPM/2550 RPM/3300 RPM/4050 RPM/4800 RPM
• Model #: CL-W263-PL00SW-A

• Brand: Watercool
• Model: WAT-0423
• Part Number: WAT-0423
• Features: With the new HEATKILLER RAD series, we expanded our product portfolio with premium mesh radiators. The new radiators are available in two different strengths, with the Small (S) RADs at a thickness of 30mm and the Large (L) RADs at a thickness of 48mm. In addition to an optimized performance,
• Model #: WAT-0423

• Model #: DEETB0G58PHN3T

(3)

• Type: Fittings
• Model #: CL-W092-CA00BL-A

• Brand: Watercool
• Model: WAT-0325
• Part Number: WAT-0325
• Color: Black
• Model #: WAT-0325

• Type: CPU Block
• Model #: PC-T8-CLR

• Type: CPU Block
• Model #: B-TSPD5-SNB

Limited time offer, ends 09/19

• Model #: 9550675441291

• Model #: DEETB0B4HLH7JV

• Model #: 884945140065

• Type: Accessories
• Model #: WAT-0492

Limited time offer, ends 09/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Aluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode Transistors Cooler IC Chipset Quantity: a lot of 20 Pieces M3 Screw Hole. Size: 19x 15x 10mm/ 0.8" x 0.6" x 0.4" (L*W*H) Thickness" 0.8mm Color : Anodized Black Weight: 2g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
• Dimensions: 19x 15x 10mm
• Model #: 11-001-067

• Type: CPU Block
• Color: Pink
• Model #: 6932167209368

• Type: Accessories
• Model #: WAT-0192

• Model #: 230366254544

• Type: Accessories
• Model #: 1023217

• Type: Radiator
• Model #: WAT-0301

• Type: Accessories
• Model #: WAT-0491

• Brand: Watercool
• Model: 4251312602871
• Part Number: WAT-0090
• Features: This replacement reservoir base is compatible with any Watercool HEATKILLER® Tube reservoir.
• Model #: 4251312602871

• Type: CPU Block
• Model #: CR-RD120RC-TK60-V2

• Type: Accessories
• Model #: WAT-0074

• Type: Tubing
• Model #: WAT-0098

Limited time offer, ends 09/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

• Type: Pump
• Model #: WAT-0327

• Type: CPU Block
• Model #: 6932167225429