DIY Cooling

• Type: Fittings
• Model #: 14930

• Brand: Alphacool
• Model: 1023203
• Part Number: 1023203
• Color: Pink
• Model #: 1023203

• Brand: Alphacool
• Model: 1023200
• Part Number: 1023200
• Color: Pink
• Model #: 1023200

• Brand: Alphacool
• Model: 1023202
• Part Number: 1023202
• Color: Pink
• Model #: 1023202

• Type: Fittings
• Model #: BP-TBWP-C04

• Type: Fittings
• Model #: BP-TBWP-CT

• Type: CPU Block
• Model #: PCUT

• Type: Accessories
• Model #: WAT-0338

• Type: CPU Block
• Color: Black
• Model #: B-TE3-X-BK

• Type: CPU Block
• Color: White
• Model #: B-HTJV2-L12-W

• Type: CPU Block
• Color: Black
• Model #: B-DTJ-S-BK

• Type: CPU Block
• Model #: B-PD5-SNB-NE

Limited time offer, ends 09/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

• Brand: Watercool
• Model: 1013023
• Part Number: WAT-0014
• Type: Reservoir
• Model #: 1013023

• Type: Fittings
• Model #: BP-RBLEML16-6P

• Type: CPU Block
• Model #: R-SL-W12-TXS

• Brand: Thermal Grizzly
• Model: TG-MP8-100-100-05-2R
• Part Number: TG-MP8-100-100-05-2R
• Color: Pink
• Model #: TG-MP8-100-100-05-2R

• Type: Pump
• Model #: 6937826603440

• Type: Fittings
• Model #: BP-BSWP-C65

• Type: CPU Block
• Model #: N-AS3090STRIX-X-V3

• Type: Fittings
• Model #: 14923

• Brand: Alphacool
• Model: 4250197186780
• Part Number: 1023111
• Color: Black
• Model #: 4250197186780

• Brand: ModMyMods
• Model: 649823636722
• Part Number: MOD-0366
• Color: Black
• Model #: 649823636722

• Brand: Mayhems
• Model: MX1UVYG250
• Part Number: MYH-0143
• Type: Coolant
• Model #: MX1UVYG250

• Brand: Mayhems
• Model: MX1C250
• Part Number: MYH-0137
• Type: Coolant
• Model #: MX1C250

• Used For: Consumer
• HeatSink: with HeatSink
• Package Content: • Rocket NVMe Heatsink • Thermal tap • Screws • Screwdriver • Installation guide
• Model #: SB-HTSS

• Model #: BP-BS90R2LD-2P

• Brand: ModMyMods
• Model: 649823636562
• Part Number: MOD-0350
• Color: Black
• Model #: 649823636562

• Brand: Thermal Grizzly
• Model: TG-MP-E2-120-20-10-2
• Part Number: TG-MP-E2-120-20-10-2
• Color: Grey
• Model #: TG-MP-E2-120-20-10-2

• Type: CPU Block
• Model #: WAT-0367

Limited time offer, ends 09/30

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Type: Accessories
• Model #: WAT-0018

• Model #: N-AS3090TUF-X-V2

Limited time offer, ends 09/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20x20x6mm,Please check your component dimension carefully,and make sure size of the heatsink fits it no problem. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm Weight: 35g Package Content: 10pcs x Heatsink
• Dimensions: 20mm x 20mm x 6mm
• Model #: 11-001-258

• Type: Radiator
• Model #: 4250197102261

• Type: CPU Block
• Model #: R-SL-A48-SBK