Your Browsing History
Any questions? Our AI beta will help you find out quickly.
Try me now
Quick View
- Block Compatibility: AM4
- Type: Water Blocks
- Color: Black
- Model #: CL-O011-CLSTSL-A
Quick View
USB 3.1 Front Panel Type-E Header Male to Motherboard Internal USB3.0 19/20Pin Connector Extension Cable Adapter,8 inches
Limited time offer, ends 07/31
- Model #: 11-001-129
Quick View
- $274.99 –
- Free Shipping
Quick View
- Type: Fittings
- Features: Dimension: ?22 x 25 (H) (mm) Applicable: G 1/4 Weight: 47 g Material: CU Screw Thread: G 1/4 Note: Female to Male
- Model #: CL-W046-CU00SL-A
Quick View
5 Sets/10pcs Raspberry Pi B+ Pi 2 Pi 3 Anodized Black Aluminum Heat Sink Radiator CPU RAM cooler,LAN cooling (2 Heatsinks/Kit)
Limited time offer, ends 07/31
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
- Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
- Model #: 11-001-200
Quick View
5pcs/lot Black Aluminum Fin Heatsink 25x25x10mm Electronic Cooling Radiator Heat sink for CPU,GPU Graphics Video Card dissipator
Limited time offer, ends 07/31
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
- Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
- Model #: 11-001-328
Quick View
10pcs/lot Aluminum Heatsink 20x20x6mm Electronic Chip Cooling Radiator Cooler for IC MOSFET SCR Heat Sink Extrusion Fins
Limited time offer, ends 07/31
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20x20x6mm,Please check your component dimension carefully,and make sure size of the heatsink fits it no problem. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm Weight: 35g Package Content: 10pcs x Heatsink
- Dimensions: 20mm x 20mm x 6mm
- Model #: 11-001-258
Quick View
20pcs/lot Aluminum Heatsink 14x14x10mm Electronic Chip Cooling Radiator Cooler for IC MOSFET SCR,Router Heat Sink Extrusion Fins
Limited time offer, ends 07/31
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 14mm x 14mm x 10mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14 x 14 x 10mm/ 0.55" x 0.55" x 0.4" (L*W*H) Weight: 55g Package Content: 20pcs x Heatsink
- Dimensions: 14 x 14 x 10mm
- Model #: 11-001-322
Quick View
10 Sets/30pcs CPU RAM LAN Aluminum Heatsink Cooler,Mini PC Raspberry Pi 2, Raspberry Pi A A+, Raspberry Pi B B+ Radiator Cooling
Limited time offer, ends 07/31
- Color: silver
- Compatibility: CPU
- Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
- Model #: 11-001-255(10)
Quick View
2pcs/lot Anodized Black Aluminum Heatsink 35x35x10mm Chipset Radiator Cooler for Southbridge Northbridge IC,3W LED Cooling
Limited time offer, ends 07/31
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 25g Package Content: 2pcs x Heatsink
- Dimensions: 35mm x 35mm x 10mm
- Model #: 11-001-261
Quick View
- $49.99 –
Quick View
Alphacool NexXxos XT45 Full Copper Radiator 360, 120mm x 3, Triple Fan, Black
- Type: Radiator
- Radiator Size: 397 x 124 x 46mm
- Radiator Material: Copper
- Fan Size: 120mm
- Model #: 14166
- $116.99 –
- Free Shipping
Quick View
- $10.99 –
- $6.57 Shipping
Quick View
M.2 SSD Copper Heat Sink with Thermal Pad for NVMe NGFF 2280 M2 Solid State Disk Computer Cooler PC Notebook Radiator Laptop Heatsink-70x20x1.5mm
Limited time offer, ends 07/31
- Model #: 11-001-195
Quick View
10pcs/lot Aluminum Heatsink 8.8x8.8x5mm with 3M 8810 Thermally Conductive Adhesive Tapes Electronic Chip Cooling Radiator Cooler
Limited time offer, ends 07/31
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
- Model #: 11-001-393
Quick View
- Type: Fittings
- Model #: CL-W033-CA00BL-A
Quick View
1Set/33pcs Aluminum Heat Sink Radiator Heatsink Cooler Kit for GPU Graphics Card ,VGA Video Card Heat Dissipation
Limited time offer, ends 07/31
- Color: Silver
- Compatibility: VGA Chipsets
- Features: Aluminum heatsink are generally used in the heat treatment and the fins increase the area of the board and thus provide for greater heat transfer. GPU graphics card Cooling Heatsink Kit is a fan-less cooling solution to any GPU, graphics card, video card. And,Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name :GPU Video Card Heatsink; Material : Aluminium Color : Silver Tone Package Content : 15 pieces - 8.8mmx8.8mmx5mm Heatsink 10 pieces - 14mmx14mmx6mm Heatsink 8 pieces - 20mmx14mmx6mm Heatsink
- Dimensions: 15 pieces - 8.8mmx8.8mmx5mm Hea...
- Model #: 11-001-128
Quick View
10Gbps USB C Cable,USB-A to USB-C USB 3.1 USB 3.2 Gen2 10Gb/s Data and 3A/60W Fast Charging Cord for USB C External SSD MacBook Pro iPad, Galaxy S24/S23+, iPhone 16/15,1ft,Black
Limited time offer, ends 07/31
- Model #: 11-001-259
Quick View
- Type: Fittings
- Features: Dimension: ?22 x 30 (H) (mm) Applicable: G 1/4 Weight: 63 g Material: CU Screw Thread: G 1/4 Note: Female to Female
- Model #: CL-W050-CU00BL-A
Quick View
Copper Heatsink 14x9x5mm with 2.0 W/mK Thermal Adhesive Tape Heat Sink for Motherboard ,Memory, IC Chipset Cooling Radiator - Pack of 4
Limited time offer, ends 07/31
- Model #: 11-001-062
Quick View
10pcs/lot Aluminum Heatsink 20x14x6mm Electronic Chip Cooling Radiator Cooler for IC MOSFET SCR,Router Heat Sink Extrusion Fins
Limited time offer, ends 07/31
- Color: Silver
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20mm x 14mm x 6mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20 x 14x 6mm/ 0.8" x 0.55" x 0.24" (L*W*H) Weight: 25g Package Content: 10pcs x Heatsink
- Dimensions: 20 x 14x 6mm
- Model #: 11-001-321
Quick View
Copper Heatsink 8x8x4mm with 2.0 W/mK Thermal Adhesive Tape Heat Sink for Motherboard ,Memory, IC Chipset Cooling Radiator - Pack of 8
Limited time offer, ends 07/31
- Model #: 11-001-330
Quick View
Alphacool G1/4 3/8"ID x 1/2"OD Compression Fitting - Deep Black (17078)
- Type: Fittings
- Model #: 17078
- $3.00 –
- $6.57 Shipping
Quick View
- $64.99 –
- Free Shipping
Quick View
Premium 2Set(6pcs) CPU RAM LAN Heatsink Cooler Kit,Mini PC Raspberry Pi 2, Raspberry Pi A A+, Raspberry Pi B B+ Radiator Cooling
Limited time offer, ends 07/31
- Compatibility: Motherboard Chipsets
- Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
- Model #: 11-001-098
Quick View
2pcs/lot Anodized Black Aluminum Heatsink 35x35x10mm CPU Southbridge IC Transistor chip Cooling Radiator Cooler w/ Screws
Limited time offer, ends 07/31
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
- Dimensions: 35mm x 35mm x 10mm
- Model #: 11-001-262
Quick View
2pcs Anodized Black Aluminum FIn Heatsink 28x28x20mm Electronic Cooler Radiator Heat sink for Northbridge Southbridge IC Chip
Limited time offer, ends 07/31
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Anodized Black Aluminum heatsink for Computer General northbridge ,Southbridge Cooling ,also can be used for cooling graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 20mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 20mm/ 1.1" x 1.1" x 0.8" (L*W*H) Weight: 30g Package Content: 2pcs x Heatsink
- Dimensions: 28 x 28 x 20mm
- Model #: 11-001-327
Quick View
5pcs/lot Anodized Black Aluminum Heatsink 25x25x5mm Electronic Chip Cooling Radiator Cooler for power IC,Electric chipset etc.
Limited time offer, ends 07/31
- Color: Black
- Compatibility: Motherboard Chipsets
- Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25mm x 25mm x 5mm Weight: 20g Package Content: 5pcs x Heatsink
- Dimensions: 25mm x 25mm x 5mm
- Model #: 11-001-260