Specifications: Tripp Lite's professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cable to 110 jacks and patch panels, or, telephone wire to 66M blocks. Each blade (110 or 66) contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment. Adjustable High/Low actuation setting accommodates termination requirements or installer preference.
Package Contents: One 6in wire stripper pliers
One 3-piece soldering aid set
One heat sink
One magnifying glass (3 x 38mm)
One stainless steel tweezers
One 6-piece precision screwdriver set
One 4.5in stainless steel side cutter pliers
One 5in stainless steel long nose pliers
One Phillips 3.2 x 75mm screwdriver
One Phillips 5.0 x 75mm screwdriver
One Slotted 5.0 x 75 mm screwdriver
One Slotted 3.2 x 75 mm screwdriver
One parts box
One 8-piece mini-electronic combination wrench set (5, 5.5, 6, 7, 8, 9, 10, 11mm)
One PU carrying case (315 x 240 x 93mm)
One soldering stand
One solder core
One 3-prong holder
One utility knife
one desoldering pump
One soldering iron
Specifications: Resting length: 2ft
Max stretched length: 6ft
Dissipates static electricity during electronic repair and maintenance
Adjustable wristband
Molded ends for long life use
Package Contents: ESD Anti-Static Wrist Strap with Ground
Specifications: Includes Accessories:
MicroScanner2 Cable Verifier
main wiremap adapter
remote identifiers #2-7
IntelliTone Pro 200 probe
shielded twisted-pair RJ45 patch cord
RJ11 patch cord
clip-set RJ45 to 8 alligator clip bare wire adapter
F Coax push on patch cord
accessory soft pouch
(2) AA alkaline batteries
(1) 9V alkaline battery
MicroScanner2 Getting Started Guide
MicroScanner2 Owners CD
IntelliTone Pro Getting Started Guide
MicroScanner2 owners CD
IntelliTone Pro Getting Started Guide
IntelliTone Pro owners CD
packaged in a deluxe Fluke Networks carry case
Specifications: Essential Tools for Cable Installers or Telecom/LAN Personnel
Tests Cat5, Cat6, Cat6a and telephone cable assemblies
Cable tester combines main tester unit and removable remote tester unit
Identifies connection, no connection, short circuit or open circuit
Tests multiple types: RJ11, RJ12, RJ45
Fast and slow LED flashing modes during automatic testing
Designed to Make Your Work Easier
Includes cable tester, crimping tool, LSA punchdown tool and stripper tool
Stores away in convenient carrying case
Side A - Connector 1: RJ45 (FEMALE)
Side B - Connector 1: RJ45 (FEMALE)
Specifications: Technical detailsColour of productYellowWeight & dimensionsWeight10.8 oz (307g)Dimensions (WxDxH)2.37 x 8.74 x 3.37" (60.3 x 222 x 85.7 mm)Operational conditionsOperating relative humidity (H-H)10 - 80%
Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency:
1000 Hz nominal
Alternating Frequency:
1000/1500 Hz nominal
Over Voltage Protection:
60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode:
8 dbm into 600 ohms
Output Voltage Level in Continuity Mode:
8 Vdc with fresh battery
Battery:
9V alkaline
Temperature:
Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions:
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
The Pro3000’s ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally bei...