Meet Your Seller
Arctic Silver Arcticlean Thermal material Remover & Surface Purifier ACN-60ML (2-PC-SET)
- Unique 2-Step Process
- Removes existing thermal grease or pads
- Prepares surface for fresh applications
Any questions? Ask CelesteSM will help you find out quickly.
Unique 2-Step ProcessArctiClean 1 Thermal Material Remover quickly emulsifies and dissolves the existing thermal grease or pad from the CPU and/or heatsink so that it can easily be removed with a clean cloth or paper towel. A few drops of ArctiClean 2 Thermal Surface Purifier and some gentle wiping then removes the remaining residue and inhibits flash corrosion on copper or aluminum.
ArctiClean 1 Thermal Material RemoverArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads. The citrus and soy based solvents in ArctiClean 1 match or exceed many hazardous and volatile solvents such as fluorinated and chlorinated organic solvents, acetone, MEK (methyl ethyl ketone), mineral spirits, isopropyl alcohol, and toluene.
ArctiClean 2 Thermal Surface PurifierThe cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material. It also incorporates advanced flash corrosion inhibitors that minimize the corrosion layer on copper and aluminum allowing for more intimate contact between the thermal interface material and the heatsink.
Using ArctiClean 2 With Other SolventsMost solvents and cleaning products leave residue on the CPU and heatsink that negatively affects the performance of any subsequently applied thermal interface material. ArctiClean 2 Thermal Surface Purifier removes the residue of citrus or petroleum based cleaners and inhibits flash corrosion on a copper or aluminum heatsink.
Why Not Just Use Isopropyl Alcohol or Acetone?Put isopropyl alcohol or acetone on a thermal pad and 10 minutes later you will have a thermal pad. Only with a lot of rubbing and scrubbing will you be able to remove the pad. While the alcohol or acetone may soften the pad, neither actually dissolves the pad. Although less visible, it is the same cleaning thermal greases with alcohol or acetone.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by PlatinumMicro Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
Arctic Silver ArctiClean ACN-60ML is a two-step, 60 ml cleaning kit for removing old thermal grease or pads and preparing CPU and heatsink surfaces for fresh thermal interface material. It suits PC builders and maintainers replacing thermal compound.
Recommended For
- PC builders reseating a CPU cooler or replacing thermal paste who want to remove old compound and prepare the CPU and heatsink for fresh thermal material.
- Repair and refurbishment technicians cleaning dried or stubborn thermal paste or pads from CPUs, heatsinks, or waterblocks before reassembly.
- PC maintainers who want a dedicated two-step process: one solution to loosen thermal material, followed by a surface purifier before applying fresh thermal interface material.
- Users removing thermal pads as well as grease, particularly when they want a remover designed to emulsify both types of thermal material.
Real-World Use Scenarios
- When replacing CPU thermal paste during a cooler upgrade or reseat, use ArctiClean to remove the old compound from the CPU and heatsink; the two-step wipe-down leaves the surfaces ready for fresh thermal paste.
- When old thermal pad material remains on a heatsink after the bulk has been scraped away, apply ArctiClean 1 to soften and remove the residue, then use ArctiClean 2 before applying new thermal material.
- Before applying new thermal compound to a copper or aluminum cooler, use ArctiClean after removing the old material to clear cleaner residue and prepare the surface for the next application.
- When servicing a system that has already been cleaned with another solvent, use ArctiClean 2 as the final wipe on the thermal-contact surface to remove remaining cleaner residue before reapplying thermal compound.
- During a PC maintenance or repair job that requires removing the CPU cooler, use the kit to clean both exposed thermal-contact surfaces; gentle wiping prepares them for reassembly with fresh thermal interface material.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Removing thermal grease or pad residue from CPUs and heatsinks before applying fresh thermal interface material |
| Cleaning Process And Use | Two-step kit: ArctiClean 1 emulsifies and dissolves existing thermal material for wiping away; ArctiClean 2 removes remaining residue and prepares the surface for fresh thermal interface material |
| Formula And Surface Care | ArctiClean 1 uses non-toxic, biodegradable citrus- and soy-based solvents; ArctiClean 2 uses cationic surfactants and flash-corrosion inhibitors for copper and aluminum surfaces. Citrus scent |
| Package Contents And Volume | 60 ml total: 30 ml ArctiClean 1 and 30 ml ArctiClean 2 |
| Model Identifiers | Arctic Silver ACN-60ML (2-PC-SET) |
Reference Q&A
Q: ArctiClean vs. isopropyl alcohol for cleaning a CPU: which should I choose?
A: Choose ArctiClean when you want a two-step process that removes thermal material and then purifies the surface before applying fresh thermal interface material. ArctiClean 1 emulsifies thermal grease or pads; ArctiClean 2 removes remaining ArctiClean residue and includes corrosion inhibitors for copper and aluminum.
Q: ArctiClean or isopropyl alcohol for removing an old thermal pad?
A: Choose ArctiClean for thermal pad removal: Arctic Silver describes ArctiClean 1 as emulsifying thermal pads, followed by ArctiClean 2 to purify the surface for a fresh thermal interface material.
Q: Should I use the full ArctiClean kit or just ArctiClean 1?
A: Use the full kit when you want both stages of surface preparation. ArctiClean 1 removes thermal grease or pads, while ArctiClean 2 removes residue left by the first step and provides flash-corrosion inhibitors for copper or aluminum.
Q: Does this kit remove old thermal paste and thermal pads?
A: Yes. ArctiClean 1 emulsifies existing thermal grease or pads so they can be wiped away. ArctiClean 2 then removes remaining residue and prepares the CPU or heatsink surface for new thermal material.
Q: Do I need to use both bottles?
A: The kit is designed as a two-step process: use ArctiClean 1 to loosen and remove the old thermal material, then ArctiClean 2 to clear remaining residue and help inhibit flash corrosion on copper or aluminum surfaces.
Q: Is this suitable for cleaning a CPU and heatsink before applying new thermal compound?
A: Yes. The kit is intended to remove old thermal material from a CPU and/or heatsink and prepare the surface for a fresh application. The package contains two 30 mL bottles, one for each cleaning step.
Q: Can ArctiClean 2 be used after another cleaner?
A: The product listing says ArctiClean 2 is intended to remove residue from citrus- or petroleum-based cleaners and to inhibit flash corrosion on copper or aluminum. It does not specify compatibility with every cleaner, so check the cleaner’s instructions if using a different type.






Unique 2-Step ProcessArctiClean 1 Thermal Material Remover quickly emulsifies and dissolves the existing thermal grease or pad from the CPU and/or heatsink so that it can easily be removed with a clean cloth or paper towel. A few drops of ArctiClean 2 Thermal Surface Purifier and some gentle wiping then removes the remaining residue and inhibits flash corrosion on copper or aluminum.
ArctiClean 1 Thermal Material RemoverArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads. The citrus and soy based solvents in ArctiClean 1 match or exceed many hazardous and volatile solvents such as fluorinated and chlorinated organic solvents, acetone, MEK (methyl ethyl ketone), mineral spirits, isopropyl alcohol, and toluene.
ArctiClean 2 Thermal Surface PurifierThe cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material. It also incorporates advanced flash corrosion inhibitors that minimize the corrosion layer on copper and aluminum allowing for more intimate contact between the thermal interface material and the heatsink.
Using ArctiClean 2 With Other SolventsMost solvents and cleaning products leave residue on the CPU and heatsink that negatively affects the performance of any subsequently applied thermal interface material. ArctiClean 2 Thermal Surface Purifier removes the residue of citrus or petroleum based cleaners and inhibits flash corrosion on a copper or aluminum heatsink.
Why Not Just Use Isopropyl Alcohol or Acetone?Put isopropyl alcohol or acetone on a thermal pad and 10 minutes later you will have a thermal pad. Only with a lot of rubbing and scrubbing will you be able to remove the pad. While the alcohol or acetone may soften the pad, neither actually dissolves the pad. Although less visible, it is the same cleaning thermal greases with alcohol or acetone.