Specifications: Pro3000 Analog Toner Specifications
User interface:
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency: 1000 Hz nominal
Alternating Frequency: 1000/1500 Hz nominal
Over Voltage Protection: 60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode: 8 dbm into 600 ohms
Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery
Battery: 9V alkaline
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Pro3000 Analog Probe specifications
User interface:
ON/OFF pushbutton
Volume dial
Replaceable tip
3.5 mm earphone jack
Battery: 9V alkaline
Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
Specifications: Included in Package: Black leather holder
Instruction Manual
Remote Cable Tester
LED Indicators: Battery condition
Center conductor
Conductor indicators
Connected or 25 Ohm detected
No cable / No terminator
Non-parallel or 50 Ohm detected
Shielding
Short circuit detected
Product Height: 25 mm [1 in]
Product Length: 180 mm [7.1 in]
Product Weight: 250 g [8.8 oz]
Product Width: 110 mm [4.3 in]
Shipping (Package) Weight: 0.4 kg [0.9 lb]
Features: This 8ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 250.00 volts and an input current of 15 amps. The cable is in color and is UL listed. It comes with a Female-to-Male connector and does not require batteries.
Features: This 6 ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 250 volts and an input current of 2.5 amps. The cable is in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries.
Features: This 3ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 125.00 volts and an input current of 10 amps. The cable is in color and is UL listed. It comes with a Female-to-Male connector and does not require batteries.
Features: This 2ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 125.00 volts and an input current of 10 amps. The cable is in color and is UL listed. It comes with a Female-to-Male connector and does not require batteries.
Features: This 10ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 125 volts and an input current of 7 amps. The cable is in color and is UL listed. It comes with a Female-to-Male connector and does not require batteries.
Specifications: Test Pin Configuration:
- RJ45 EIA, TIA-568A/568B, and crossover cables
- RJ9, RJ11, RJ12, RJ14, RJ25, RJ45, and RJ61
- USOC 2, 4, 6, and 8
- Coax Video-BNC and CATV-F
- USB 3.0, USB 2.0
Transmitter Unit Interface:
- 1 x RJ port
- 1 x USB 3.0/2.0 Type-A port
- 1 x USB 3.0/2.0 Type-B port
- Test button
- Mode button
- On/off button
- LED indicators
- Battery compartment
- Receiver unit attachment port
Power Source
- Transmitter: 9 V DC battery (not included)
- Remote unit: No power needed
Features: Connect your battery chargers, laptop power supplies, AV equipment, video game consoles, and other equipment with non-polarized IEC 60320 C8 power receptacle.