150M USB2.0 Extender Over Ethernet RJ45 Cat6 Cable UTP Extension 6 Ports USB 2.0 Hub Splitter for Keyboard Mouse Printer U Disk Camera

150M USB 2.0 Extender Over Ethernet RJ45 Cat6 Cable UTP Extension 6 Ports USB 2.0 Hub Splitter for Keyboard Mouse Printer U Disc

Important Safety Instructions
1. To prevent electric shock, please ensure that all apparatus is properly grounded.
2. Place the device in a well-ventilated area, do not block any ventilation openings.
3. Do not expose this apparatus to rain or place it near water. Any liquid that goes into the apparatus may cause a failure, fire, or electric shock
4. Do not place the device on an uneven or unstable surface. The device may fall resulting in a malfunction.
5. Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
6. If a three-party power supply is used, please ensure that the power supply specifications meet the product requirements.


Introduction
This is a USB 2.0 extender, which can realize one-to-one connection through CAT5e/6/7 network cables, with a transmission distance of up to 100m for CAT5e and 150m for CAT6 and above; When the connection passes through the switch, the input and output cable distances can reach 100m respectively. It supports 6 channels of USB 2.0 device input, such as printer, camera, scanner, USB flash drive, keyboard, mouse, touchscreen, etc., and supports gigabit switch cascade.
It can be used for security monitoring, gaming, industrial control, professional audio-visual, smart medical and other fields.


Features
1. Support USB 2.0 High-Speed, Compatible with USB 1.1 Full-Speed, USB 1.0 Low-Speed.
2. Support 6 USB 2.0 inputs and 1 USB 2.0 output.
3. Compatible with CAT5e/6/7 network cables, CAT5e transmission distance can reach 100m, and CAT6/7 transmission distance can reach 150m.
4. Support USB hub connection.
5. The transmitter is powered by the source device, no additional power supplys required.
6. Support switch relay, the transmission distance of signals can be increased through the switch.
7. Support hot-plugging of USB devices and automatically identifyUSB High-Speed, Full-Speed and Low-Speed
8. Lightning protection, surge protection, ESD protection.
9. Plug and play.

Connection Instructions
1. Connect the transmitter to the signal source device via USB cable, and then connect the USB device to the receiver.
2. Connect the transmitter and receiver with Cat5e/6/7 network cable. If the transmission distance needs to be further extended, connect the switch between the transmitter and the receiver.
3. Plug the power supply into the receiver to get started.

Q&A
Q: There is no response after USB device is connected?
A: 1) Please check whether the driver is installed properly;
2) Please check whether the network cable conforms to IEEE-568B standard and whether the cables are firmly connected;

Q: The receiver is unstable when connected to an external web camera?
A: When connecting high-power USB devices, it is necessary to supply additional power to external devices.

Package Contents
Transmitter x1
Receiver x1
USB Cable x1
DC5V/2A x1
User Manual x1
Mounting lugs x4