Your Browsing History
Meet Your Seller
MACHINIST X99 Dual CPU Motherboard LGA 2011-V3, for Intel Xeon E5 v3 v4 CPU Processor, DDR4 Max Support 256GB, Gigabit LAN, PCIe 3.0, NGFF/NVME M.2, SATA 3.0, USB 3.0, E-ATX Server PC Mainboard
- Intel Dual CPU Sockets: This C612 chipset server motherboard is designed with dual CPU sockets, which can support Xeon E5 V3/V4 series processors. (Note: Core i7 not support Dual-CPU mode, if only one CPU is installed, please install it in the left slot)
- DDR4 Memory Slots: The memory slots of the LGA 2011-v3 motherboard is designed with 8-channel, which can support DDR4, DDR4 ECC, DDR4 RECC RAM. It supports effective frequencies is 2133/2400MHz, and the maximum capacity is 256GB. (Note: When use E5 v4 CPU, can not support Desktop DDR4 RAM)
- PCIe 3.0 Protocol: Equipped with 2 PCIe 3.0 X16 graphics card slots (with steel case), and 1 PCIe 3.0 X8, 2 PCIe 2.0 X1. The transfer rate can reach 15.754 GB/s. Equipped with 2 M.2 hard disk slots, which can achieve fast reading even if multiple programs are running
- Stable Power Supply: The X99 Dual CPU motherboard use 24+8+8pin standard power supply interface, 8-phase power supply. Precise modularization provides good heat dissip
+
+
Overview
Specs
Reviews
MACHINIST X99 dual CPU gaming motherboard with LGA 2011-3 socket and DDR4 slot for Intel E5 v3 v4 CPUs.
Specification:
Chipset: Intel C612
CPU socket: 2*LGA 2011-3 sockets
CPU support: Intel Xeon E5 V3 V4 CPUs (can support dual CPU mode), Intel Core i7 CPUs(can't support dual CPU mode)
Memory slot: 8*DDR4 slots
Memory support: DDR4 ECC/RECC server memory and DDR4 desktop memory (When use Xeon E5 V4 CPU, only DDR4 ECC/RECC can be support)
Memory frequency: 2133/2400 MHz
Memory capacity: 256GB (8*32GB)
Storage interface: SATA 3.0 *8, M. 2 interface*2
M. 2 slot: The default mode of M. 2 is NVME, which can be switched to NGFF (SATA) through a jumper cap. The M. 2 specification is PCIe 3.0 x4, and the maximum speed is 3600M/S
Applicable hard drives: SATA 2.5 solid state drives, SATA 3.5 mechanical hard drives, MVME M. 2, SATA M. 2
Expansion interface: 2*PCI Express x16 slots, 1*PCI Express x8 slots, 2*PCI Express x1
Onboard network card: 2*reaItek8111 Gigabit network card
Sound card: Realtek ALC 897 2.1 channel
Power interface: 24pin+8pin+8pin
Fan interface: 2*4pin*2, 2*3pin
Power supply: 8-phase
Overclocking: Not supported
Motherboard size: 330mm*300mm
Motherboard specification: E-ATX
RAID: support RAID0, RAID1, RAID5
Startup shortcut key: F11
Tips:
1.
CMOS clearing method: disconnect the power supply of the motherboard, then remove the CMOS battery, and reinstall the CMOS battery after 3 minutes.
2. When only install one processor, the CPU must be installed on the left side of the motherboard, the CPU power supply must be plugged into the CPU power supply interface on the left side of the motherboard, the memory can only be installed on the left side of the motherboard, and the graphics card must be installed on PCle slot 1 or 5 (from top to bottom).
3. The package does not contain a user manual, but we can sent a manual file to you if you need.
4. The CR2032 battery on the motherboard has been removed, it is not included in the package, please purchase it yourself
Specification:
Chipset: Intel C612
CPU socket: 2*LGA 2011-3 sockets
CPU support: Intel Xeon E5 V3 V4 CPUs (can support dual CPU mode), Intel Core i7 CPUs(can't support dual CPU mode)
Memory slot: 8*DDR4 slots
Memory support: DDR4 ECC/RECC server memory and DDR4 desktop memory (When use Xeon E5 V4 CPU, only DDR4 ECC/RECC can be support)
Memory frequency: 2133/2400 MHz
Memory capacity: 256GB (8*32GB)
Storage interface: SATA 3.0 *8, M. 2 interface*2
M. 2 slot: The default mode of M. 2 is NVME, which can be switched to NGFF (SATA) through a jumper cap. The M. 2 specification is PCIe 3.0 x4, and the maximum speed is 3600M/S
Applicable hard drives: SATA 2.5 solid state drives, SATA 3.5 mechanical hard drives, MVME M. 2, SATA M. 2
Expansion interface: 2*PCI Express x16 slots, 1*PCI Express x8 slots, 2*PCI Express x1
Onboard network card: 2*reaItek8111 Gigabit network card
Sound card: Realtek ALC 897 2.1 channel
Power interface: 24pin+8pin+8pin
Fan interface: 2*4pin*2, 2*3pin
Power supply: 8-phase
Overclocking: Not supported
Motherboard size: 330mm*300mm
Motherboard specification: E-ATX
RAID: support RAID0, RAID1, RAID5
Startup shortcut key: F11
Tips:
1.
CMOS clearing method: disconnect the power supply of the motherboard, then remove the CMOS battery, and reinstall the CMOS battery after 3 minutes.
2. When only install one processor, the CPU must be installed on the left side of the motherboard, the CPU power supply must be plugged into the CPU power supply interface on the left side of the motherboard, the memory can only be installed on the left side of the motherboard, and the graphics card must be installed on PCle slot 1 or 5 (from top to bottom).
3. The package does not contain a user manual, but we can sent a manual file to you if you need.
4. The CR2032 battery on the motherboard has been removed, it is not included in the package, please purchase it yourself
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by kaipuda Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...