Features: Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX4090, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690, and future new GPUs & Chipsets. (Compatible with NZXT H1 & Evolv Shift 2 Air)
Screws are not recommended for the riser cable. Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please install the riser cable onto the GPU first before securing the GPU with I/O bracket mount. *Please do not use the screws to mount the TT P8 case (the GPU can still be secured by the two screws on the PCIE slots in the case)
Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wi...
Specifications: Chipset: 2 x NIVIDA NF200-SLI-A3
Expansion Slots: 4 x PCIe2.0 x16 slots support up to full x16/x16/x16/x16 configurations
Multi-GPU Technology: Support NVIDIA 4-Way SLI Technology
Internal Connectors:
- 2 x 3-pin Fan connectors
- 1 x 4-pin Fan connectors for Onboard Fan
- 4 x EZ Plug connectors (4-pin Molex Power connectors)
- 1 x OV jumper for NF200 power (Default:1.2V; OV: 1.25V)
- 1 x dedicated USB Connector for firmware update
- 1 x 4-pin header for firmware update
Accessories:
- 2 x Golden Finger PCIe connectors
- 1 x 4-Way SLI Bridge
Form Factor: 9.54" x 6.95" (24 .2cm x 17.6cm)
Compatible Models: Rampage III Extreme & Rampage III Formula
Specifications: Interface: M.2 to Mini SAS HD
Supported Protocol: PCI Express
Dimension: 65 x 22 x 15mm (w/h/d)
Weight: 12g (main unit only)
ASUS Compatible Motherboards:
SABERTOOTH X99
RAMPAGE V EXTREME/USB 3.1
X99-DELUXE/USB 3.1
X99-PRO/USB 3.1
X99-A/USB 3.1
RAMPAGE V EXTREME
X99-DELUXE
X99-PRO
X99-A