Computer Peripherals

• Model #: DZ-Tools-012-A

• Type: Management Card
• Specifications: Operating Environment: 0 - 45 Degree Celcius Operating Relative Humidity: 0 - 95 % Operating Elevation: 0 - 10000 Feet Storage Temperature: -5 - 45 Degree Celcius Storage Relative Humidity: 0 - 95 % Storage Elevation: 0 - 50000 Feet Approvals AS/NZS 3548 (C-Tick) Class A, EN 55022 Class A, EN 55024, FCC Part 15 Class A, GOST, ICES-003, VCCI Class A RoHS Compliant
• Dimensions: 1.50" x 4.75" x 4.50"
• Weight: 0.20 lb.
• Model #: AP9631

• Type: Single-Monitor Stand
• Specifications: LCD Size: < 24" Weight Capacity: 6–16 lbs (2.7–7.2 kg) Lift: 5", 13 cm Tilt: 30° Pan: 270° Rotation: 90° P/L VESA: MIS-D Description: Neo-Flex LCD Desk Stand (black & silver) Meets UL Specification 1678 Tip Test when loaded with all weights of LCDs Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
• Weight: 5.75
• Parts: 3 years limited
• Model #: 33-310-060

• Changer Type: BNC Connectors
• Model #: A1171

• Type: Monitor Arm
• Specifications: Device Supported: Flat Panel Display Maximum Load Capacity: 25.00 lb Maximum Screen Size Supported: 42" Color: Polished Aluminum VESA Mount Compatible: Yes VESA Mount Standard: 75 x 75, 100 x 100, 200 x 100, 200 x 200 Height: 20.0" Depth: 33.0" Weight (Approximate): 11.00 lb
• Weight: 12.7
• Model #: 45-353-026

• Type: Monitor Arm and Mount
• Color: Polished Aluminum
• Specifications: Screen: <= 34.00" Lift: 13.00" (33.00 cm) Tilt Range: 70 degrees backward, 5 degrees forward Pan: 360 degress Rotation: 360 degrees VESA: MIS-D Mounting Options: Desk Clamp attaches to surface edge 0.40" to 2.40" (10.00 to 60.00 mm) thick; Grommet Mount attaches through surface holes 0.31" to 2.00" (8.00 to 50.00 mm) wide and up to 2.25" (57.00 mm) thick Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100.00 x 100.00 mm & 75.00 x 75.00 mm) Weight Capacity: 7.00 to 25.00 lbs. (3.20 to 11.30 kg). With monitors greater than 20.00 lbs. (9.10 kg) in weight, the vertical range of motion may be reduced up to 4.50" (11.00 cm) for a total height range of 8.50" (22.00 cm) Note: If installed on WorkFit-T or WorkFit-TL, maximum allowable monitor weight is reduced to 14.00 l...
• Model #: 45241026

• Electrical Outlet Plug Type: N/A
• Model #: T050-001-USB-A

• Changer Type: DDR5
• Model #: A1172

• Model #: Aomoproing-QD24

• Model #: 8567456998

• Model #: yu-676

• Model #: CL-ADOC-18

• Model #: CR1500-K101-C514

• Camera Resolution: Up to 1080p Video
• USB Port: 1
• Other Connector: AHD
• Option: 2 Port
• Model #: GTUS-AHD2USBA

• Weight: 3.0000
• Model #: CR1500-K101-C500-US2

• Model #: CR1100-K201-C507

• Model #: CR1500-K101-C508

• Model #: CR1500-K201-C500

• Model #: 6903411007

• Connector Type: USB C to USB C
• Model #: USBC-METER3-1MF

• Brand: Clover Technologies Group
• Product Sort: Printer Accessories
• Product Type: Maintenance Kit
• Compatibility: HP LaserJet Ent 600 M601 / M602 / M603
• Model #: CF064-67901-REF

• Model #: 6903411010

• Model #: 4HJ9F84H

Limited time offer, ends 03/31

• Model #: ENCR336-C

• Model #: 6903411009

• Model #: EP-033-BK-5PCS-NGB

• Series: Isolator
• Type: Isolation Transformer
• Specifications: Efficiency: 96% Let-through Voltage (Combination Wave): L-N: 250V L-G: 250V N-G: 0.5V Let-through Voltage (Ring Wave): L-N: 20V L-G: 20V N-G: 0.5V Nominal Voltage / Frequency: 120V / 60Hz Over Current Protection: 1x thermal, 2 pole, 10 amp Surge Test Conditions: Per ANSI/IEEE C62.41 - IEEE587 Cat. A & B test waveforms Total Harmonic Distortion: Less than 1% VA / Watt Capacity: 1800 Transformer Type: Hospital Grade, low impedance transformer-based line isolation transformer Output Receptacles: 6 x 5-20R-HG Ouput Amp Capacity: 15 Input Cord Length (ft.): 10 Input Plug Type: NEMA 5-20P-HG Noise Suppression Rating: 35-65 DB Unit Dimensions (hwd / in.): 7.75 x 8.25 x 12.25 Certifications:Tested to UL60601-1
• Weight: 58.75
• Model #: IS1800HG

• Changer Type: BNC Connectors
• Model #: A1170

• Model #: CR1100-K201-C500

• Model #: 69089009359

• Model #: ww-887

• Model #: ww-850

• Model #: 6903411055

• Model #: 9550675461053

• Type: All-In-One Lift Stand
• Specifications: Includes stand, CPU strap, buckle cover, VESA monitor mounting kit, cable ties * Weight Capacity: 6 - 16 lbs. for display; total stand capacity = 37 lbs for combined weight of display, CPU, keyboard and mouse Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm) Meets tip test requirements of UL Specification 1678 Compatible with most 15" - 24" displays, and most small or ultra small form factor CPUs, notebook computers, and gaming consoles Maximum CPU size = 14" H x 4" D (36 x 10 cm); minimum CPU size = 7" H x 1.8" D (18 x 4.6 cm). The CPU should be centered on the stand Motion may be restricted when using 22" - 24" monitors in portrait mode Removal of lock screw allows portrait to landscape rotation Mounting Option: Two M4 threaded screw inserts are located at the bottom of ...
• Model #: 33-326-085

OUT OF STOCK

• Type: Single-Monitor Stand
• Specifications: Weight Capacity: 6–16 lbs (2.7–7.2 kg) for display; total stand capacity = 37 lbs (16.7 kg) for combined weight of display, CPU, keyboard and mouse Motion may be restricted when using 22"–24" monitors in portrait mode Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm) Five-inch (13 cm) height adjustment ergonomically accommodates average range of users Meets tip test requirements of UL Specification 1678 + Removal of lock screw allows portrait to landscape rotation (90°) Compatible with most 15"–24" displays, and most small or ultra small form factor CPUs. Maximum CPU size = 15"W x 14"H x 4.5"D (38 x 35.6 x 11.4 cm); minimum CPU size = 7"W x 7"H x 2"D (18 x 18 x 5.1 cm). Provided rubber spacer must be used to accommodate CPU depths of less than 3" (7.6 cm) Moun...
• Model #: 33-338-085