Specifications: Glide Wall Mount will be hidden behind display in most cases when used with screen size of 46" or greater; when used with screens smaller than 46", the mount may be visible
Mounting holes must fit within spacing range below:
Horizontal = 100 mm (min.) to 400 mm (max.)
Vertical = 100 mm (min.) to 400 mm (max.)
Includes low-profile lift module, mounting template, tilt brackets, installation and mounting hardware, cable management hardware
Specifications: Display size is dependent on overall configuration of the DS100 Stand; observe balance requirements to prevent tipping
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Attaches to DS100 Pole only; cannot attach to DS100 Crossbar
Specifications: Maximum outside width of display is 24.5" (62 cm) when displays are 2" (5 cm) thick. Accommodates most displays with screen-size up to 24" as well as some displays with screens as large as 26". Actual allowable width of displays will vary slightly depending on display thickness
Specifications: Description: WorkFit-C Sit-Stand Workstation for Two LCD Monitors, Dual, with Mobile Cart Base (black/grey)
Includes cart, two (2) LCD mounts, crossbar, integrated worksurface, large stowable keyboard tray, cable storage box, CPU holder, four dual casters (two locking), hand-brake system
**** Maximum outside width of each display = 21.25" (54 cm)
* Weight Capacity: Maximum load on height-adjustment assembly = 32.5 lbs (14.7 kg). Includes weight of displays and keyboard in addition to contents on Worksurface and in Cable Storage Box. LCD mount capacity = 6-14 lbs (2.7-6.3 kg) each, 12-28 lbs (5.5-12.7 kg) total
*** Lift Range: LCDs/keyboard/worksurface adjust 20" (51 cm) in tandem; LCDs adjust 5" (13 cm) independently; maximum LCD height adjustment = 25" (63 cm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 1...
Specifications: Device Supported: Flat Panel Display, Notebook
Maximum Load Capacity: 25.00 lb
Maximum Screen Size Supported: 42"
Color: Polished Aluminum
VESA Mount Compatible: Yes
VESA Mount Standard: 75 x 75, 100 x 100
Weight (Approximate): 8.75 lb
Specifications: Description: Worksurface for WorkFit-S Sit-Stand Workstations (black)
Includes worksurface, mounting brackets with integrated handle, and mounting hardware
Worksurface Dimensions: 0.25" H x 23" W x 15 "D (6 x 585 x 380 mm)
Cannot be added to system where Tablet/Document Holder accessory 97-558-200 is installed
Installation of the worksurface will not impact normal 20" (51 cm) range of sit-stand height adjustment, but may impact the relative vertical adjustment of larger displays when in portrait orientation
When this accessory is added to the WorkFit-S, total weight capacity of the workstation is reduced by 6 lbs (2.7 kg)
Specifications: Weight Capacity: Total load on height-adjustment assembly = 50 lbs (22 kg). Includes contents of Worksurface, Cable Storage Box and LCD Pivots. LCD Pivot capacity = 6–14 lbs (2.7–6.4 kg) per display, 12–28 lbs (5.4–12.7 kg) for both displays
Mounting Standards: VESA FDMI, MIS-D, 75/100 (hole patterns = 100 x 100 mm and 75 x 75 mm)
Displays can be mounted on cart in 5 different height positions
Install displays at 3.5° or 8.5° upward angle for optimized viewing conditions. Displays are not tilt adjustable
CPUs attach safely to rear of cart with CPU Holder: Adjusts from 12"H x 3"D to 18"H x 8.5"D (30 x 8 cm to 46 x 22 cm)
CPU Holder capacity: 40 lbs (18 kg)
Cable Storage Box and space within the center column can conceal and route cords, wiring and power bricks
Barcode scanner holder provides easy access to ...
Specifications: Device Supported: Flat Panel Display
Maximum Load Capacity: 25 lb
Maximum Screen Size Supported: 42"
Color: Polished Aluminum
VESA Mount Standard:
75 x 75
100 x 100
200 x 100
200 x 200