Specifications: Supports two displays between 15.00" - 24.00" with maximum weight 26.00 lbs. per display
Flexibility to tilt up and down +/- 20 degree
Swivel displays side to side +/- 20 degree
Rotate 90 degree for landscape or portrait mode
Hole pitch 100 mm x 100 mm VESA and 75.00 mm x 75.00 mm VESA
Specifications: Max Weight per mount (lbs): 19.8
Mounting Hole Pattern (mm): 75 x 75; 100 x 100
Screen rotation (portrait/landscape): 360°
Tilt/pan adjustment: Ball joint mechanism allows 40 degrees display adjustment in any direction from the vertical plane
Display pan adjustment: 90 degrees left and right, total of 180 degrees
Cable management: Integrated
Mounting options: Wall
Maximum reach (inches): 24
Maximum distance from the wall (inches): 24
Number of studs required: 1
Hardware required for installation: All mounting hardware included
Color: Black
Specifications: LCD Size: <= 22"
Weight Capacity: 13 lbs (5.9 kg) per mount, 26 lbs (11.8 kg) total. Note: Monitors must be equal in weight or ±1 pound (.45 kg)
Monitor depth greater than 3" (7.5 cm) may diminish capacity
Install display mounts on the bow at +2.5° or -2.5° angle to optimize viewing conditions
Monitors are installed with 8° inward off-set angle, creating a 16° viewing parabola for better sight lines
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Durable, easy-to-clean powder-coated painted steel exterior
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud
Includes wall mount bracket, 2 extensions, crossbar and 2 sliding LCD mounts, VESA mounting screws
Specifications: Max Weight per mount (lbs): 26.5
Quick release Mounting Head: Yes
Mounting Hole Pattern (mm): 75 x 75; 100 x 100
Screen rotation (portrait/landscape): 360°
Tilt/pan adjustment: Ball joint mechanism allows 20 degrees display adjustment in any direction from the vertical plane
Display pan adjustment: 90 degrees left and right, total of 180 degrees
Color: Black
Specifications: Max Weight per mount (lbs): 26.5
Quick release Mounting Head: Yes
Mounting Hole Pattern (mm):
- 75 x 75; 100 x 100
- Require 200 x 100 Add AC-AP-2010 adaptor plate to your order
Screen rotation (portrait/landscape): 360°
Rotation around pole: 360° OR FIXED
Tilt/pan adjustment: Ball joint mechanism allows 20 degrees display adjustment in any direction from the vertical plane
Display pan adjustment: 90 degrees left and right, total of 180 degrees
Pole height (inches): 29.5
Cable management: Integrated
Mounting options: Desk clamp and bolt through
Pole diameter(inches): 1.6
Display Compatibility:
- Spacedec Donut Pole is compatible with most Flat Panel Displays between 12" (30cm) and 24" (61cm) that feature either 75mm x 75mm (3 x 3") or 100mm x 100mm (4 x 4") VESA mounting hole patterns
Mount...
Features: The sturdy construction of this 2-display panel mount supports a great number of advantages for those wanting to create amore ergonomic and functional workspace. SEE MORE and DO MORE with features like: 90 Degree Monitor Rotation, Height Adjustment, Cable Management, Arm Angle Adjustment, IntelliTorque Hinge System, Aluminum Allow Structure, Easy
Specifications: LCD Size: < 24"
Wt. Capacity: 31 lbs (14 kg) per monitor; 124 lbs (56 kg) total
Rotation: 360° P/L
VESA: MIS-D
Description: DS100 Quad-Monitor Desk Stand (black)
Includes: Base, 28" pole, two (2) Paraview bows, four (4) sliding brackets, manual
Maximum LCD outside width is 23-1/4" (59 cm)
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Specifications: Description: Tall-User Kit for WorkFit Dual
Includes two (2) single monitor pivots, two (2) riser brackets, installation hardware
* Maximum outside width of display is 21.25" (54 cm) when displays are 2" (5 cm) thick. This is typically the horizontal dimension of a 22" diagonal screen-size monitor. Actual allowable width of displays will vary slightly depending on display thickness
** Weight Capacity: 6 - 14 lbs. (2.7 - 6.3kg) per display, 12 - 28 lbs. (5.5 - 12.7kg) combined
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Specifications: Description: Steel Stud Wall Mounting Kit
Includes Wall Plate, six (6) screws, six (6) anchors
Screw size = 1/4-20 x 1-1/2"
Compatible Ergotron Mounts: Neo-Flex HD Wall Mounts, LX Wall Mount Arms, 100 Series Pivots, 200 Series Wall Mounts, 400 Series Wall Mount Arms
Weight Capacity: 50 lbs (22.7 kg)
UL compliant: Tested to four times its maximum weight capacity per UL 1678 Specification (do not exceed 50 lbs/22.7 kg in actual use)
Specifications: Description: DS100 Crossbar Extender, Long (black)
Includes: Long Extenders, Center Display Bracket, Attachment hardware
Display: Maximum physical outside width of display = 24.5" (62 cm). This is slightly more than typical display with a 26" screen.
Weight Capacity: 31 lbs (14 kg) per monitor
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Specifications: Weight Capacity: Total load on height-adjustment assembly = 50 lbs (22 kg). Includes contents of Worksurface, Cable Storage Box and LCD Pivots. LCD Pivot capacity = 6–14 lbs (2.7–6.4 kg) per display, 12–28 lbs (5.4–12.7 kg) for both displays
Mounting Standards: VESA FDMI, MIS-D, 75/100 (hole patterns = 100 x 100 mm and 75 x 75 mm)
Displays can be mounted on cart in 5 different height positions
Install displays at 3.5° or 8.5° upward angle for optimized viewing conditions. Displays are not tilt adjustable
CPUs attach safely to rear of cart with CPU Holder: Adjusts from 12"H x 3"D to 18"H x 8.5"D (30 x 8 cm to 46 x 22 cm)
CPU Holder capacity: 40 lbs (18 kg)
Cable Storage Box and space within the center column can conceal and route cords, wiring and power bricks
Barcode scanner holder provides easy access to ...
Specifications: LCD Size: <=24"
Capacity: 8-33 lbs
Mounting Standards: VESA FDMI MIS-D, 100/75 (hole pattern: 100 x 100 mm & 75 x 75 mm)
Monitor pans left/right up to 50° (varies per size of monitor)
Fold-down keyboard with built-in mouse pad surface
Keyboard tray extends out up to 5" (12.7 cm) inches when in use
Keyboard tray pans left/right up to 120°
Scanner and mouse holder integrated into the keyboard tray
Back-tilt keyboard tray adjustable (0 to -10 degrees)
Integrated cable management system can be configured on either side
Easy-to-clean exterior
Specifications: Screen Sizes: 17” to 32”
Weight Allowance: 3.3 lb (1.5 kg) to 16.5 lb (7.5 kg) per arm
VESA Sizes: 75×75 and 100×100
Height adjustment: 9.5” (24 cm) of fingertip height adjustment
Tilt: ±25°
Reach: 23.3” (59.3 cm) depending on screen size and orientation
Monitor Rotation: 360°
Integrated cable management
Includes: Assembly manual; All mounting hardware
Material: Aluminum construction with durable painted finish
Specifications: Max Weight per mount (lbs): 55
Quick release Mounting Head: Yes
Mounting Hole Pattern (mm): 75 x 75; 100 x 100
Screen rotation (portrait/landscape): 360°
Tilt/pan adjustment: Ball joint mechanism allows 20 degrees display adjustment in any direction from the vertical plane
Display pan adjustment: 90 degrees left and right, total of 180 degrees
Mounting options: Wall
Fixed Distance from wall to rear of display: 3.1"
Number of studs required: 1
Color: Black
Specifications: Max Weight per mount (lbs): 26.5
Mounting Hole Pattern (mm): 75 x 75; 100 x 100
Screen rotation (portrait/landscape): 360°
Tilt/Pan adjustment: Ball joint mechanism allows 20 degrees display adjustment in any direction from the vertical plane
Pole height (inches): 18.7
Cable management: Internal / Integrated
Mounting options: Freestanding
Pole diameter: 1.6
Foot print (inches): 16.6 x 12
Color: Silver with black donuts
Specifications: Color: Black
Material: Steel/Aluminum alloy/Plastic
Max. wall mount hole pitch: 100 x 100 mm/ 75 x 75 mm (MIS-D 100 / MIS-D 75)
Screw Type: M4
Swivel: +/-90 degree
Tilt: +90 / -20 degree
Rotate(Pivot): 360 degree
Support max. weight: 2 ~ 10Kg (4.4~22.1lbs) per arm
Support flat panel size: <=24"
Min. Distance To The Wall: 97mm
Support desktop thickness: 8mm (0.32")~ 50mm (1.96")
Extended Arm Provided: 2
Net Weight: 3.8Kg (8.37Ibs)
Dimension: 500mm (W) x 497mm (H) x 619mm (D)
Specifications: Suit for 2 Monitors
Suit Size: 13-27 inch
Unit Weight: 14.99 lbs
Unit Dimensions: 13.39" x 26.77" x 17.44"
Load Capacity: 10 kgs (per monitor)
VESA 75 x 75 & 100 x 100
Tilt: -90 to +90 degree
Swivel: 360 degree
Rotate: 180 degree
Height adjustable
With weighted base
Integrated cable management system
Monitor can be installed either in
portrait or landscape shape
Fully adjustable steel arms