Seco-Larm E-922CPQ Enforcer Automatic Voice Dialer, 6 Phone Numbers & 3 Trigger Inputs

Seco-Larm E-922CPQ Enforcer Voice Dialer, LCD Display, 6 Programmable Alarm Telephone Numbers, Built-in Flash Memory, Wall-mountable, Programmable Auto-dialing, Tone or Pulse Dialing

Key Features:
- Trigger-activated dialer with user-recorded 18-second alarm message
- The last 6 seconds of the alarm message is individually customizable for each input
- 3 Trigger inputs and 1 inhibit input, each programmable high (input >3.5V) or low (input <1V)
- 1 Auxiliary relay output, NO/NC programmable for 1~255 seconds
- Works as a stand-alone unit or connected to a security system
- LCD display indicates status, either ready or alarm showing which input and number dialed
- Listen in, stop the dialing process, and/or turn the auxiliary output on or off during dialer call out
- Call in at any time to listen in to room and/or turn the auxiliary output on or off
- 6 Programmable alarm telephone numbers (up to 14 digits each)
- Programmable auto-dialing to call each number three times or call a single number
- Built-in flash memory to protect against system data loss in case of power failure
- Tone or pulse dialing
- Terminal blocks for all external connections
- Wall-mountable

Specifications:
- Phone System: For single-line analog or VOIP phone systems
- Operating Voltage: 10~18 VDC
- Alarm message length (user recorded): 12s site message + 6s individual message for each input
- Programmable alarm phone numbers: 6
- Maximum digits per phone number: 14
- Programmable dial attempts: Up to 3 times per number
- Alarm message repeat: 1~2 times for each number
- Trigger inputs (1~3): Programmable high (input >3.5V, max. 15V) N.O. or N.C. or low (input<1V) N.O. or N.C
- Dimensions: 4.06 x 5.56 x 1.68
- Weight: 0.99 pounds