4000mW 36dBm 2.4GHz and 5.8GHz IEEE 802.11/a/n/b/g/ac Dual Band UAV WiFi Signal Booster Wireless Signal Amplifier Repeater Extender for House, Office, UAV, IP Cameras, RC Equipment

Features:
2.4GHz/5.8GHz, Max. 4000mW output power;
Aluminum-alloy case by CNC, anti-interference;
For house, office, UAV, IP cameras, RC equipment....
[Maximum Output Power of 4000mW]
SHPro5824G4W 2.4GHz/5.8GHz Dual Band WiFi Signal Booster is 36dBm 4W WiFi Amplifier, offering maximum output power of 4W at ideal situation. Input power range is 0~20dBm, suggested to be 16~19dB for better signal amplifying performance. Add a suitable length of cable or attenuator between wifi device's output with the wifi booster, if the output signal power is over 20dBm. (Note that longer RF cable connection will cause greater signal attenuation).
[Application of 2.4GHz/ 5.8GHz 4W WiFi Booster]
2.4GHz and 5.8GHz wireless monitoring(NVR,DVR);2.4GHz and 5.8GHz wireless microphone, RC drones, FPV device etc. For UAV, Routers, IP cameras, R/C helicopters, planes and cars, Walkie talkies, ZigBee, Robot... For House, Office, Hotels, Supermarkets, Hospitals, Parking Spaces... For WiFi Solution and Project : WiFi Hotspot Solutions, Access points, Smart home systems, Smart city IOT, RC Drones Platform, security camera system
SHPro5824G4W 2.4GHz/5.8GHz Dual Band WiFi Signal Booster can extend WiFi Signal Range, enhancing WiFi Transmit/ Output power of 2.4GHz/5.8GHz Wireless Device, enjoying better 2.4G/5.8G WiFi Signal at use.
Made of Aluminum-alloy case by CNC, anti-interference, IEEE802.11b/g/a/n/ac standards, compatible with variety of 2.4GHz/ 5.8GHz frequency transmitter and receiver wireless network devices. Easy installation, simply plug and play, no software is required.
SHPro5824G4W 2.4GHz/ 5.8GHz WiFi Signal Booster is 36dBm 4W WiFi Amplifier, offering maximum output power of 4W at ideal situation. Input power range is 0~20dBm, Transmit gain 16~19dB can greatly improve WiFi signal range.
Specifications:
Booster model: SHPro5824G4W
Operating range : 2.4~2.5GHz ; 5.0~5.8GHz
Channel width: 20Mhz&40Mhz&80Mhz
Supported standards: IEEE 802.11b/g/n/a/ac
Operation mode: Bi-directional, half-duplex, time division duplex
Connector type: N-K female
Output power: 4000mW (36dBm)
Input power: 0 ~ 20dBm
Transmit gain: 16 ~ 19dB
Receiver gain: 12dB
Noise figure: 3.5dB typical
Frequency response: ±1dB over operating range
Power adapter: 12V/2A DC, 100~240V
Operating temperature: -20°Cto +70°C
Operating humidity: Up to 75% relative humidity
Material: Cast aluminum
LED light: Power status LED and activity status LED
Booster size: 130mm x 77mm x 24mm
Booster weight: 318g
Instructions on use:
1. Remove the antenna from the wireless device first.
2. Take out the SMA/N cable and connect the wireless device to the TO Radio port of the signal amplifier.
3. Connect the antenna to the other end of the signal amplifier (TO Antenna).
4. Plug in the power and it's done.
Package contents:
1 x SHPro5824G4W WiFi booster
1 x Power supply (12V/2A DC, 100~240V)
1 x English user manual
Attention:
The power amplifier is not suitable for use in high power devices.
[Enjoying Better 2.4G/ 5.8G WiFi Signal Everywhere] [Plug and Play] [Maximum Output Power of 4000mW]