weBoost Dash | Car Cell Phone Signal Booster with Magnetic Wireless Charger | 5G/4G LTE (471082)
- Boost + Charge in One: Combines a single-device cell signal booster with a built-in Magnetic Qi2 Wireless Charger, so your phone stays connected and charged on every drive
- Clearer Calls, Faster Data: Amplifies existing 5G and 4G LTE signal up to 23 dB for fewer dropped calls, less buffering, and more reliable maps and apps on your commute
- Works with All Major U.S. Carriers: Compatible with Verizon, AT&T, T-Mobile, US cellular, and more; supports iPhone and Android, with metal rings included for non-magnetic phones
- Easy DIY Install, No Drilling: Magnetic roof antenna and 12V cigarette lighter power supply set up in about 15-20 minutes with step-by-step guidance in the weBoost app
- Buy Once, No Fees: No subscriptions or monthly fees; FCC approved, designed and built in St. George, Utah, with a 2-year warranty and 30-day money-back guarantee
Any questions? Ask CelesteSM will help you find out quickly.
Dead zones and dead batteries can derail any commute. The weBoost Dash (model 471082) is a compact car cell phone signal booster with a built-in Magnetic Qi2 Wireless Charger, designed for commuters, delivery drivers, gig workers, and everyday drivers who need reliable connectivity on the road.
Dash focuses its power on one priority device. A magnetic outside antenna mounts on your vehicle roof to capture signal from nearby towers, the booster unit amplifies that signal up to 23 dB, and the signal-boosting magnetic charger delivers the enhanced signal directly to your phone while it is attached. The result is clearer calls, faster data up to 5G, and fewer dropped connections in areas with weak but present signal. Like all boosters, Dash amplifies existing signal and cannot create signal in a complete dead zone.
The built-in Magnetic Qi2 Wireless Charger keeps compatible MagSafe/Qi2 phones charged without clamping them into a cradle. Place the charger on a magnetic dash mount, in a cupholder, or on the center console. For phones without built-in magnets, adhesive metal rings and an alignment guide are included.
Dash works with all major U.S. carriers, including Verizon, AT&T, T-Mobile, and UScellular, on iPhone and Android devices. Installation takes about 15-20 minutes with no drilling or permanent modifications, using the weBoost app and the included 12V cigarette lighter power supply. It fits cars, SUVs, trucks, and vans.
In the box: Dash signal booster, Mini-Mag outside antenna, inside antenna with Magnetic Qi2 charger, centering ring, and cigarette lighter adapter power supply. Dash is FCC approved, designed and built in St. George, Utah, and backed by a 2-year warranty, a 30-day money-back guarantee, and U.S.-based support, with no subscriptions or monthly fees.
Warranty & Returns
Warranty, Returns, And Additional Information
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Newegg.com's 30-Day Return Policy.
- Read full return policy for details.
Manufacturer Contact Info
- Manufacturer Product Page
- Manufacturer Website
- Support Phone: 1-866-294-1660
- Support Email: support@weboost.com
- Support Website
- View other products from weBoost
The weBoost Dash is a car cell signal booster with a built-in magnetic Qi2 wireless charger, designed for drivers who want to boost existing 5G or 4G LTE signal and charge one priority phone while traveling.
Recommended For
- Drivers who regularly cross rural or fringe-coverage areas and want to improve a weak, existing phone signal for calls, navigation, or streaming; testing found improved connectivity on a familiar weak-signal commute, though results can vary by location.
- Commuters, delivery drivers, and gig workers who spend much of the workday in a vehicle and want one priority phone boosted and wirelessly charged during trips.
- Drivers who want a portable, no-drill setup they can move between vehicles instead of a permanently installed booster; Car and Driver found the kit quick to install and easy to transfer.
- Solo drivers who want to keep one phone connected and charged for hands-free navigation, calls, or work-related travel, rather than share boosted signal across several phones.
Real-World Use Scenarios
- On a commute through a known weak-signal stretch, a driver keeps their phone attached to the Dash charger for navigation or music streaming; if usable cellular signal is still present, the connection may stay usable where it previously struggled.
- A delivery or rideshare driver working in areas with spotty-but-existing coverage keeps a primary phone connected for maps and work apps; the single-device booster may help reduce interruptions, but it will not restore service in a true dead zone.
- On a rural drive where the phone still has a weak signal, a driver tries to keep calls, email, or basic data working; results depend on available coverage and supported bands, so the booster is not a fix for areas with no signal.
- A driver whose phone tends to lose data near home or on a regular route uses the Dash to keep navigation or streaming available earlier in the trip; one Car and Driver test reported streaming from the driveway despite the phone still showing one bar.
- During a long workday on the road, a driver mounts their main phone on the magnetic charger for boosted signal and wireless charging in one place; the phone must remain attached to the charger to receive the amplified signal.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Commuters, delivery drivers, and everyday drivers who want to boost signal for one priority smartphone in a car, truck, SUV, or van |
| Signal Boosting And Compatibility | In-vehicle wireless signal repeater for smartphones; supports 5G and 4G LTE on major U.S. carriers and is listed as compatible with U.S. and Canadian cellular devices |
| Boosting Performance And Frequency Bands | Up to 23 dB gain across Bands 12/17 (700 MHz), 13 (700 MHz), 5 (850 MHz), 4 (1700/2100 MHz), and 25/2 (1900 MHz); 23.2 dBm uplink and 2.5 dBm downlink output |
| Charging And Included Components | Combines a Qi2 magnetic wireless phone charger with an outside antenna, power supply, and metal adhesive alignment ring |
| Power And Installation | Requires 12V DC, 2A power; designed for app-guided installation in about 15–20 minutes without drilling or permanent vehicle modifications; no batteries required |
| Physical Specifications | 4.375 × 2.75 × 0.5 in; 1.8 lb for the booster or 1.83 lb for the complete kit; black |
| Compliance And Model Identifiers | FCC ID PWO082; brand weBoost, Dash series, model and part number 471082; manufacturer Wilson Electronics |


















