Specifications: Turn your standard USB cable into a Universal Cable
Universal / Reversible A-Male plugs in any direction
Turns a standard USB cable into a Universal Cable
Up-Angle A connector ideal in situations where space is at a premium
USB2.0 Rated
Specifications: Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate) : SATA
Drive Size: 2.5in
Interface USB: 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Specifications: Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - USB 3.1 USB Type-A (9 pin; Gen 2; 10 Gbps) Male
Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in
Interface: USB 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate : 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Specifications: Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in & 3.5in
Interface : USB 3.1 Gen 2
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 6TB
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
LED Indicators: 1 - Power and Activity
Center Tip Polarity: Positive
Input Current: 0.6 A
Input Voltage: 110 ~ 240 AC
Output Current: 2.0 A
Output Voltage: 12 DC
Plug Type: M
Power Source: AC Adapter Included
Specifications: Wired network connection
Supporting laptops without Ethernet ports, the Kensington CA1100E USB-C to Gigabit Ethernet Adapter provides a direct and secure connection to your internet or LAN. Connecting the USB-C (male) connector to your device’s USB-C or Thunderbolt 3 port, and the Ethernet cable to the RJ45 (female) port, will provide a secure hard-wired connection.
Gigabit transfer speeds
Increase your productivity and peace of mind with 10/100/1000 BASE-T performance. Securely transfer and download even the largest of files with the confidence that only a wired connection can provide.
Plug and Play Design
Simply plug the adapter into the USB-C or Thunderbolt 3 port on your laptop and connect to your network. Compatible with Windows 8...
Specifications: Requirements:
For PC Users
Windows XP, Windows Vista, Windows 7, Windows 8/8.1, 10
Available USB 2.0 port
Chrome Book
Linux, Unix and other USB supported systems*
*Additional drivers and support may be needed
For MAC Users
Mac 8.6 or greater. Requires OS X for USB 2.0 support
Available USB 2.0 port
Specifications: Ports: 8
Bus Type: USB 2.0
Port Style: External Hub
Chipset ID: FTDI FT2232H
Performance
Max Baud Rate: 921.6 Kbps
Maximum Data Transfer Rate: 921.6 Kbps
Serial Protocol: RS-232
Data Bits: 7, 8
FIFO: 4096 byte Transmit and Receive
Parity: Odd, Even, Mark, Space, None
Stop Bits: 1, 2
Specifications: Maximum Resolution: 3840 x 2160
Host Interface: USB 3.0
DisplayPort: Yes
Number of DisplayPort Outputs: 1
System Requirements: Operating System(s):
Windows 8/8.1 (32/64bit)
Windows 7 (32/64bit)
Windows Vista (32/64)
Windows XP (32/64)
Windows 2000 (Aero 3D interface supported)
Specifications: Connects a USB-C or Thunderbolt 3 PC, laptop or tablet to a wired Ethernet network
Provides instant access to Gigabit speeds without an internal Ethernet card
Simplified connections with a reversible Type-C connector that plugs into your device’s port in any direction
Easy to install with plug-and-play operation - no software or drivers required
Ultra-compact design for easy transport
Type: 8-Port Industrial USB to RS-232/422/485 Serial Adapter
Color: Black
Changer Type: USB to RS-232/422/485 Serial
Specifications: Converts a single USB port into eight RS232/RS422/RS485 serial ports over USB 2.0 with four modes: RS232, RS422, 4-wire and 2-wire RS485
15 kV ESD protection (Level 4) against noise emissions and electrical voltage surges
DIN rail and wall mountable
Rugged IP30 rated metal hub housing and screw-locking host connection, ideal for harsh industrial environments
Data transfer baud rate up to 921.6Kbps
Single USB 2.0 hub port (pass-through) for daisy chaining, or for connecting an additional USB device to the host
COM port expansion with COM retention
Self-powered with included external power adapter
Specifications: Material of Construction: PC (Plastic)
Cable Jacket Rating: VW-1
Cable Outer Diameter (OD): 3.9mm
Wire Gauge (AWG): 32 + 28
Side A - Connector 1: USB A (MALE)
Side A - Connector 2: USB C (MALE)
Side B - Connector 1: RJ45 (FEMALE)
USB Specification: USB 1.1 (up to 12 Mbps); USB 2.0 (up to 480 Mbps); USB 3.0 (up to 5 Gbps)
Driver Required: No
Recommended Category Cable: Cat6/6a
Remote Wakeup Support: Yes
Network Speed Support: 1 Gbps (Gigabit)
Specifications: Bus Type: USB 2.0
Interface: Serial
Data Bits: 7, 8
FIFO: 256 Bytes
Max Baud Rate: 921.6 Kbps
Maximum Data Transfer Rate: 480 Mbps
Parity: Odd, Even, Mark, Space, None
Serial Protocol: RS-232
Stop Bits: 1, 2
LED Indicators: 8 x Data Transmit, 8 x Data Receive
Center Tip Polarity: Positive
Input Current: 1.5 A
Input Voltage: 100 ~ 240 AC
Output Current: 3 A
Output Voltage: 12 DC
Plug Type: B
Power Consumption: 36 W Max.
Humidity: 20 - 80% RH (Non-condensing)
Specifications: Bus Type: USB 2.0
Chipset ID: FTDI - FT232RL
Interface : Serial
Port Style: External Hub
Ports: 16
Data Bits: 7, 8
FIFO: 256 Bytes
Max Baud Rate: 921.6 Kbps
Maximum Data Transfer Rate: 480 Mbps
Parity: Odd, Even, Mark, Space, None
Serial Protocol: RS-232
Stop Bits: 1, 2
LED Indicators 16 - Data Receive
16 - Data Transmit
Center Tip Polarity: Positive
Input Current: 1.5 A
Input Voltage: 100 ~ 240 AC
Output Current: 3 A
Output Voltage: 12 DC
Plug Type: N
Power Consumption: 36 W Max.
Power Source: AC Adapter Included
Humidity: 20~80% RH (Non-condensing)
Operating Temperature: -40°C to 85°C (-40°F to 185°F)
Storage Temperature: -65°C to 150°C (-85°F to 302°F)
Enclosure Type: Steel
Type: 4-Port Industrial USB to RS-232/422/485 Serial Adapter
Color: Black
Changer Type: USB to RS-232/422/485 Serial
Specifications: Converts a single USB port into four RS232/RS422/RS485 serial ports over USB 2.0 with four modes: RS232, RS422, 4-wire and 2-wire RS485
15 kV ESD protection (Level 4) against noise emissions and electrical voltage surges
DIN rail and wall mountable
Rugged IP30 rated metal hub housing and screw-locking host connection, ideal for harsh industrial environments
Data transfer baud rate up to 921.6Kbps
COM port expansion with COM retention
Powered by USB, and features plug-and-play installation
Specifications: Operating Temperature Range: 32 to 113 F (0 to 45 C)
Storage Temperature Range: 14 to 158 F (-10 to 70 C)
Power Consumption (Watts): 60W (20V/3A)
Operating Humidity Range: 10% to 85% RH, NON-CONDENSING
Storage Humidity Range: 5% to 90% RH, NON-CONDENSING
Max Supported Video Resolution: 3840 X 2160 (4KX2K) @60HZ
Displayport Specification: 1.2
HDCP Specification: 1.3
USB Specification: USB 3.1 Gen 1 (up to 5 Gbps)
Type: USB-C to Gigabit Network Adapter with USB-C PD Charging
Changer Type: USB-C to Gigabit Network
Specifications: USB to LAN converter adds Gigabit Ethernet and USB-C charging ports to your laptop, MacBook or other compatible device.
Connects you to a wired Ethernet network when no Wi-Fi is available
Supports USB 3.1 Gen 1 for fast data uploads and downloads up to 5 Gbps
Widely compatible with Windows, Mac and Chromium computers
Powers and charges PD Charging-compliant devices, such as MacBooks and Chromebooks
Easy installation with plug-and-play operation-no software required