Wired & Wireless Accessories

• Model #: JW055A

• Type: PoE Injector
• Specifications: Interface: "Data" Input Port: 1 x RJ-45 STP "PoE (Data+Power)" Output Port: 1 x RJ-45 STP Input power terminal block: 1 LED Indicator: System: Power 1, Power 2, Fault (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: 10Base-T: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000Mbps Dimension: 1.26" x 5.31" x 3.46" Weight: 1.05 lbs. Unit Input Voltage: 24 - 48V DC; 24V AC Power Consumption: 30 watts max. Number of device can be powered: 1 Installation: DIN rail kit and wall mount ear Alarm: Provides one relay output for power failure, Alarm relay current carry ability: 3A at DC 30V Enclosure: IP30 slim type metal case Power over Ethernet PoE Standard: IEEE 802.3at High ...
• Model #: IPOE-162

• Type: Consumer Electronics
• Specifications: 1 x 1000BASE-T (RJ-45) [100 m/328 ft.] 1 x 1000BASE-SX 850nm multimode (SC) [62.5/125µm: 220 m/722 ft.; 50/125µm: 550 m/1804 ft.]
• Parts: 1 year limited
• Labor: 1 year limited
• Model #: SGETF1013-110-NA

• Type: PoE Extender
• Color: Black
• Specifications: Ethernet Interface: LRP-101CH Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI/MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both Mid-span and End-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LRP-101CE Copper: 10/100BASE-TX RJ45, Auto-negotiation / auto-MDI/MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-) Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: LRP-101CH 4 x LEDs PWR LRP LNK PoE IN LNK / ACT LRP-101CE 4 x LEDs PWR LRP LNK PoE-in-us...
• Model #: LRP-101C-KIT

• Type: PoE Injector
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both mid-span and end-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100m Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE IN LNK / ACTESD Protection: 4 KV DC EFT Protection: 2 KV Enclosure Metal: case Installation: Wall mount or DIN rail with optional kit Power Requirements: RJ45 PoE Input: 802.3at/af 48~56V DC DC Input: 48~56V DC Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet (802.3at Type 2)
• Model #: LRP-101UH

• Specifications: Interfaces/Ports: 1 x RJ-45 Data Transfer Rate: 230 Kbps Serial Management: SNMP Protocols: Telnet Reverse Telnet PPP SSH v2 HTTP DHCP ARP RARP TCP UDP Status Indicators: Link / Power Input Voltage: 100 V AC to 240 V AC 9 V DC to 30 V DC Input Current: 400 mA 12 V DC 500 mA 9 V DC to30 V DC
• Parts: 1 year limited
• Labor: 1 year limited
• Model #: 70001805

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 0.95 lb. Power Requirements: DC 48~56V, 2A max. Unit Output Voltage: DC 45~53V Power Consumption: 75 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet Package Contents: IPOE-171-60W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-60W

• Type: PoE Splitter
• Color: Black
• Specifications: Interface: "PoE (Power + Data)" Input Port : 1 x RJ-45 10/100/1000Base-T "Data" Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block LED Indicator: System: Power Ready x 1 (Green) Network Cable: 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6 Distance up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (vary on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE 48~56V DC Power Output: 12V / 24V DC, max 2A (adjustable) Enclosure: IP30 metal case Installation: DIN rail kit and wall mount ear ESD / EFT Protection: 6 KV DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of devices that can be powered: 1 or 2 (Vary on device's power requirement; DC1 + DC2 cannot be over 25 watts.) ...
• Model #: IPOE-162S

• Type: Ceilling Bracket
• Specifications: Flush-frame acoustic ceiling bracket for ZoneFlex R710. Flush-frame only - not applicable for standard (recessed-frame) acoustic ceiling. Kit Content: 1 x Mounting bracket 2 x Mounting guide
• Model #: 902-0123-0000

• Parts: 1 Year
• Model #: WG9004

• Type: Hardware Controller
• Color: Black
• Specifications: Interface: 2 x 10/100/1000 Mbps Ethernet Ports, 1 x USB 3.0 Port Power Supply: 100-240 V~50/60 Hz, 0.6 A Dimensions: 11.60" x 7.10" x 1.70" Operating Temperature: 0-50 °C (32 - 122 °F) Storage Temperature: -40-70 °C (-40 - 158 °F) Operating Humidity: 10-90% RH non-condensing Storage Humidity: 5-90% RH non-condensing Package Cotent: - Omada Hardware Controller OC300 - Quick Installation Guide - Ethernet Cable - Power Cord - Rackmount Kit
• Model #: OC300

• Model #: J9281D

• Type: Cable
• Color: Beige
• Specifications: Cable Type: Fiber Optic Cable Length: 3.28 ft Connector on First End: 1 x SFF-8431 SFP+ Connector on Second End: 1 x SFF-8431 SFP+ Device Supported: Network Device Compatibility: Cisco 10GBASE SFP+ Modules Certifications & Standards: MSA ELV
• Model #: SFP-10G-AOC1M=

• Type: Power Supply
• Specifications: Hardware Version: 2 Dimensions: 5.04" x 3.35" x 4.92" Weight: 3.31 lbs. Input Voltage: 100-240V AC, 50/60 Hz, 4.8A Power Output: 480 watts, 48V, 10A Temperature: Operating: -20 ~ 70 degrees C Storage: -40 ~ 85 degrees C Humidity: Operating: 20 ~ 95% Storage: 10 ~ 95% (non-condensing) Installation: DIN rail TS-35/7.5 or 15
• Model #: PWR-480-48

• Type: Consumer Electronics
• Type: Others
• Connector Number: 1
• Model #: SFP-H10GB-CU5M=

• Type: PoE Injector
• Color: Black
• Specifications: Interface: LAN: 1 x RJ-45 STP, "Data" Input Port POE: 1 x RJ-45 STP, "Data + Power" Output Port AC Connector: 1 x AC Input power socket, IEC-320 C6 Network Cable: Ultra PoE (60W): 4-pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) 802.3af / at PoE(15W / 30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) LED Indicator: System: Power x 1 (Green) PoE Port: Active, PoE ready / In Use x 1 (Green) Data Rate: 10/100/1000 Mbps Unit Output Voltage: DC 50-57V, 1.2A Power Requirements: 100-240V AC @ 50/60 Hz, 1.5A max. Power Consumption: 60 watts max. PoE Standard: Ultra PoE over 4-pairs UTP, High Power over Ethernet End-Span / Mid-Span PSE PoE Power Supply Type: End-Span + Mid-Span Power Pin Assignment: Pair 1 End-Span: 1/2 (+), 3/6 (-) Pair 2 Mid-Span: 4/5 (+), 7/8 (-) PoE Power Output: DC 50-57V/60-w...
• Model #: POE-173

• Switch Type: other
• Format: Desktop
• Primary Ports: 5 x RJ45
• Primary Port Speed: 10/100Mbps
• Model #: LBS005A

• Color: Black
• Specifications: Enclosure Type: Rubber Included in Package: 10 - dust caps
• Model #: SFPLCCAP10

• Model #: SPEARQSW2FOR101

• Brand: HPE
• Part Number: R9J32A
• Type: Cable
• Color: Black
• Model #: R9J32A

• Features: • Hardened IP30 rated Gigabit PoE++ Injector • PoE (15.4W), PoE+ (30W), or PoE++ (90W) power • Network a PoE device located up to 100m (328 ft.) away • Extreme -40 to 75 °C (-40 to 167 °F) operating temperature range • Redundant power inputs with overload current protection • Includes DIN-rail mount and wall mount • Power supply sold separately (model TI-S15052,
• Weight: 1.9800
• Model #: TIIG90

• Type: Cable
• Specifications: Cable Type: SFP+ Cable Length: 9.84 ft. Connector on First End: 1 x SFP+ Network Connector on Second End: 1 x SFP+ Network Data Transfer Rate: 1.25 GB/s Compatibility: Aruba 8320 Switch Series
• Model #: J9283D

• Specifications: Cable Type: Twinaxial Cable Length: 4.92 ft Connector On First End: 1 x SFP+ Network Connector On Second End: 1 x SFP+ Network Device Supported: Network Device Data Transfer Rate: 1.25 GB/s
• Model #: 885022008827

• Model #: RMFRT16

• Brand: TRENDnet
• Part Number: TI-BE200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Standard Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE++ out port 1 x Gigabit PoE+ out port LED indicators Wall mount IP67 housing Data transfer rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB Certifications CE FCC IEC 61000-4-2 IEC 61000-4-4 IEC 61000-4-5 IEC 60068-2-27 (Shock) IEC 60068-2-32 (Free Fall) IEC 60068-2-6 (Vibration)
• Model #: TI-BE200

• Part Number: 8FP31A
• Type: Adapter
• Color: Black
• Model #: 8FP31A

• Model #: CWPP12WBL

• Brand: TRENDnet
• Type: PoE Injector
• Color: Black
• Features: Converts a non-PoE port to a PoE+ 2.5G port Supplies PoE (15.4W), or PoE+ (30W) 2.5GBASE-T compliant Integrated power supply Network a PoE device up to 100m (328 ft.) Save on installation and equipment costs IEEE 802.3af and 802.3at compliant Package Contents: 2.5G PoE+ Injector Quick Installation Guide Power cord
• Model #: TPE-215GI

• Model #: RackMount Kit-19

• Model #: WG9023

• Type: Cable
• Specifications: Cable Type: Fiber Optic Cable Length: 6.56 ft Connector on First End: 1 x SFP+ Network Connector on Second End: 1 x SFP+ Network Conductor: Copper Device Supported: Network Device
• Model #: SFP-10G-AOC2M=

• Type: PoE+ Injector
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt compatible Device Interface: 1 x Gigabit Data in port 1 x Gigabit Ultra PoE out port Metal Housing Power Input: 100-240V, 2A 50-60Hz Output: 52V, 1.38A PoE Budget: 60 watts max. Power Consumption: 5 watts max. (without PD) Temperature: 0 - 60 degree C (32 - 140 degree F) Humidity: Max. 95% non-condensing Dimension: 0.80" x 4.00" x 3.00" Weight: 0.41 lb.
• Parts: Manufacturers Limited Warranty: 3 Year / Parts Only
• Model #: TPE-117GI

• Type: PoE Splitter
• Color: White
• Specifications: Interface: PoE (Power + Data) Input Port: 1 x RJ-45 STP Data” Output Port: 1 x RJ-45 STP DC Out Plug Connector: 1 LED Indicator System: PoE In x 1 (Green) Network Cable: 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA / TIA-568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (varies on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE+ 52 ~ 56V DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of clients device can be powered: 1 Power Output: 12V DC, 2A max 24V DC, 1A max Standards Compliance: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at...
• Model #: POE-162S

Limited time offer, ends 07/18

• Brand: TRENDnet
• Model: TPE-318GI
• Part Number: TPE-318GI
• Type: PoE++ Injector
• Model #: TPE-318GI

• Model #: PD-9001GR-ENT

• Type: Device Server
• Color: Black
• Specifications: xDirect PoE Single Port RS232/422/485 10/100 Device Server w/o Power Supply Serial Connectors: Single-port: DB9F (RS232/RS422/RS485, DCE Pinned) Ethernet Interface: 10/100M RJ-45 Serial Interface Baud Rate: 300bps to 921.6 Kbps LED Indicators: Power/Status, Link, Activity, Serial RX Activity & TX Activity CPU: Based on DSTni-EX Enhanced 16-bit x86 Architecture Memory: 256 KB SRAM, 1 MB Flash *No Power Supply
• Model #: XDT10P0-01-S