Specifications: Performance Grade: Good
Resolution: Supports PC resolutions up to 1920x1200(WUXGA-R), 60Hz, 8bpc: 154MHz;1920x1080P, 60Hz, 10bpc: 144MHz
Versions Supported: DisplayPort 1.1 input and VGA output
Power requirements: Powered from DisplayPort source
Construction: The DP to VGA adapter uses an integrated chip to provide an active digital to analog conversion
Weight Lbs: 0.2
RoHS Compliant: Yes
Specifications: Audio Specifications: 5.1 Surround Sound (Video source and destination dependant)
Maximum Analog Resolutions : 1920x1200/1080p
Maximum Digital Resolutions: 1920x1200/1080p
Wide Screen Supported: Yes
Specifications: Connector on First End:1 x DisplayPort Male DisplayPort 1.1 Digital Audio/Video
Connector on Second End:1 x DVI (Dual-Link) Female Video
Specifications: Maximum Analog Resolution: 1920x1200
Adapter Style: Adapter
Audio: No
Converter Type: Active
Enclosure Type: Plastic
Humidity: 10%-85% RH
Operating Temperature: 0 Degree C to 45 Degree C
Storage Temperature: -10 Degree C to 70 Degree C
Type: DisplayPort to Dual Link DVI-D Active Adapter
Color: Black
Cable Length: 7 inch
Specifications: Connector Types: 1 x 20 pin DisplayPort Male, 1 x 19 pin DVI-D Female
Compatibility: TV’s, monitors, and projectors with a DVI output
DisplayPort Receiver Capability:
Supports 1, 2, and 4 lanes at both 1.62Gb/s and 2.7Gb/s data rates
Built-in automatic receiver equalization
Supports both full link training and no link training operation
Video input formats: RGB up to 12 bpc, YCbCr4:4:4 -4:2:2 up to 12 bpc
Supports reduced blanking or reduced refresh rate timing modes
Supports DisplayPort Spread Spectrum Clocking
DVI Transmitter Capability:
Fully TMDS/iTMDS compliant, while fully interoperable in the DVI 1.0 environment
Video output formats: RGB up to 12 bpc, YCbCr4:4:4 -4:2:2 up to 12 bpc
Supports Dual-Link iTMDS interface for increased ...
Specifications: Converter Type: Passive
Output Signal: DVI-D (DVI Digital)
Maximum Digital Resolutions: 1920 x 1200 / 1080p
System and Cable Requirements: DP++ port (DisplayPort ++) required on video card or video source (DVI and HDMI pass-through must be supported)