Specifications: System Requirements:
Any USB-enabled operating system
Available USB-C port (USB 3.1 required to achieve USB 3.1 speeds)
2.5 in. or 3.5 in. SATA drive
UASP-enabled host controller required for UASP performance
Operating Temperature Range: 50 to 122 degree F (10 to 50 degree C)
Storage Temperature Range: 32 to 149 degree F (0 to 65 degree C)
Specifications: USB-C to DB9 adapter connects legacy serial devices, such as modems and digital cameras, to your computer or laptop’s USB-C port.
Provides full modem control and hardware/software flow control
Supports data transfer speeds up to 230 Kbps-double the speed of a PC serial port
Works with any USB-C cable up to 16 ft. long (detachable 3 ft. cable is included)
Plug-and-play operation allows you to set it up and begin using it immediately
Small enough to carry in a pocket or purse for fast file transfers anywhere
Specifications: The USBPLATE4 4 port USB 2.0 slot plate adapter converts the USB pins on your motherboard into four USB-A female ports, enabling you to add USB connections to the back of your PC.
Backed by Lifetime Warranty, the USBPLATE4 is designed and constructed for maximum durability, to ensure dependable performance.
Please Note: Check your motherboard’s manual for the USB pinout diagram. The USBPLATE wiring scheme is: Red=Power, Green=Signal, White=Signal, Black=Ground
Connector A: 2 x IDC (10 pin, Motherboard Header) Female
Specifications: Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate) : SATA
Drive Size: 2.5in
Interface USB: 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate: 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes