Package Contents: USB 3.0 to M.2 SATA External SSD Enclosure with UASP
1 x USB 3.0 Cable
1 x SSD screw kit
1 x Mini Screw Driver
1 x Instruction Manual
Material: Aluminum Body, High Quality Metal, Plastic-ABS Cover
Dimensions: 2.76" x 5.51" x 4.96" w/o Feet
Specifications: SilverStone TS12 is an external hard drive docking station made to accommodate two 2.5" or 3.5" drive at speeds up to 10 Gb/s with its USB 3.1 Gen 2 capability and Type-C connector. It is packed with features such as UASP (USB Attached SCSI Protocol), so those with computers that support it can take their data transfer rate up another level. TS12's tray-less design and JBOD mode also makes it easy to setup and use with any computers. Finally, for those that wish to quickly back up or duplicate data, TS12 is also capable of operating independently by allowing for direct hard drive cloning without the need to connect to a computer.
Specifications: Enclosure connector:
USB 3.1 Gen 1 Type-C x 1
Type-C x 1 (USB PD profile 4, charging only)
USB 3.1 Gen 1 Type-A x 1 (Compatible with USB 2.0 / 1.1)
USB 3.1 Gen 1 Type-A with charging downstream port x 1, up to 5V 1.5A
Specifications: Form Factor
Thunderbolt rackmount enclosure
External Connectors
Two Thunderbolt ports
Power (C14-type)
Internal Connector
6-pin Mini-Fit Jr (same type as on legacy Mac Pro motherboard; provides up to 75W of power for PCIe cards that require supplemental power)
Expansion Slots (Facing Rear, Top to Bottom)
One x8 mechanical (x8 electrical) PCIe 3.0
One x16 mechanical (x8 electrical) PCIe 3.0
One x8 mechanical (x4 electrical) PCIe 3.0
PCIe Cards Supported
Three full-length, full-height, single-width PCIe cards or
One full-length, full-height, double-width PCIe card, plus one single-width card
Specifications: Quickly adds more storage space to your USB- or eSATA-enabled PC.
No driver installation required. Simply install a 2.5" SATA hard disk into the enclosure then connect to a USB or eSATA port.
Supports Hi-Speed USB 2.0 data transfer rate up to 480Mb/s.
Compliant with Universal Serial Bus 2.0 Specification.
Compliant with Serial ATA Specification.
Supports Serial-ATA power saving mode: Partial and Slumber.
Compliant with USB Mass Storage Class, Bulk-Only Transport Specification.