Specifications: Average Particle Size:
< 0.49 micron < 0.000020 inch
Extended Temperature Limits:
Peak: -50 Celsius Degree to >180 Celsius Degree
Long-Term: -50 Celsius Degree to 130 Celsius Degree
Performance:
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area:
A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
External USB Ports: 1 x 9pin USB 2.0 pin header, 1 x USB Type-A female port
Standard: 1 x Low profile PCI-E
Specifications: Adapter card
Connector:
52pin Mini PCI-E connector
1 x 9pin USB 2.0 pin header
1 x USB Type-A female port
Bracket:
1 x Standard
1 x Low profile
Support voltage: 1.5V and 3.3V
Antenna
Type: Dipole
Gain(dBi):
2.4 - 2.5GHz 2dBi
5.1 - 5.8GHz 3dBi
Polarization: Linear Vertical
Radiation: Omni-directional
SWR <= 2.0
Impedance: 50 Ohms
Max power: 50W
Specifications: Thermal Conductivity (W/mk): 8.5Viscosity (poise): 870Density (g/cm3): 2.5Net Weight: 8gThe ARCTIC MX-4 is a premium-grade thermal paste with exceptional performance and ease of application. It is an electrically non-conductive paste that is applied between CPU / GPU and designated coolers to transfer the dissipated heat from the components to the heat sink. Since the ARCTIC MX-4 is a metal-free compound, it eliminates the risks of causing short circuit and in turn adding more protection to your computer.The new formula in the ARCTIC MX-4 features optimal thermal conductivity and low thermal resistance. These characteristics effectively dissipate the emitted heat from the core components.The consistency of the ARCTIC MX-4 is designed for simple application. Its texture is just thin enough to spread onto components using fingers without creating much mess....
Specifications: Mounting Options: Back of Monitor, Under Desktop, or Clamped to Monitor-Mount Pole
VESA Hole Pattern(s): 75x75 mm / 100x100 mm
Note:
The adjustable mount is designed for holding small CPUs, thin clients, docking stations, or USB hubs that fit within the width adjustability of the mount: .7" to 2.8" (17 mm to 70 mm).