Specifications: HARDWARE FEATURES
DDM: Yes
SFP-MSA: Yes
Hot Swappable: Yes
MEDIA CONVERTER & MODULE
Standards and Protocols: IEEE 802.3z, TCP/IP
Wave Length: TX 1550 nm, RX 1310 nm
Power Supply: 3.3 V
Safety & Emission: FCC, CE
Cabel: Single-Mode Fiber
Fiber Type: 9/125 µm Single-Mode
Max. Cable Length: 2 KM
Data Rate: 1.25 Gbps
Port Type: LC Simplex
Environment:
- Operating Temperature: 0-70 °C (32-158 °F)
- Storage Temperature: -40-85 °C ( -40-185 °F)
- Operating Humidity: 10-90% RH, Non-Condensing
- Storage Humidity: 5-90% RH, Non-Condensing
Features: Designed for on-site gigabit fiber communication
Up to 2 km transmission distance with 9/125 µm SMF (Single-Mode Fiber)
Bidirectional WDM communication on a single fiber
Compatible with Small Form Pluggable Multi-Source Agreement (SFP-MSA)
Supports Digital Diagnostic Monitoring (DDM)
Hot-swappable module desi...
Specifications: An economical wiring solution. Carries both data and power over a single Ethernet cable
Powers 802.3at and 802.3af compliant devices
Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs
Enables you to avoid installing AC power at a remote camera, access point, or thin client
Move equipment from room to room without costly, time-consuming rewiring
Supports 10-/100-/1000-Mbps midspan data connections on an RJ-45 input/output
Provides overvoltage/overcurrent overload protection as well as short circuit protection on the power output (per 802.3at specifications)
Diagnostic LEDs indicate 802.3at device detection and alert you to faults
Backward compatible with 802.3af standard equipment
Simple plug-and-play insta...
Features: Function :
System voltage 12 Volts and Voltage test in waveform
Test Result Good, Recharge or Replace
Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Internal resistance value (mO) and Life in percentage (%)
Cranking system and Charging system
Record and re-play battery data, Life-time free update service
Battery test, cranking test, charging test and other additional functions.
The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB,DIN and IEC are supported.
Feature :
Measure Standard ,CCA 100-2000 ,BCI 100-2000 ,CA 100-2000 ,MCA 100-2000,
JIS 26A17-24SH52 ,DIN 100-1400 ,IEC 100-1400 ,EN 100-2000 ,SAE 100-2000,
GB 100-1400,System Voltage 12 Volts ,Input Voltage Range 8V-16V ,Power Requirements are no internal batteries required,Power on when hooked up during testing.
Specifications: Ethernet Interface:
Copper:
10/100BASE-TX RJ45
auto-negotiation / auto-MDI / MDI-X
Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment)
PoE Output: 56V DC, 600mA max.
PoE Budget: Up to 25 watts
PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-)
Data Rate: 100/100 Mbps
Cabling: Cat5e or above
Maximum Distance: 100 meters
Maximum Frame Size: 1522 bytes
LED Indicators:
4 x LEDs
PWR
LRP LNK
PoE-in-use
LNK / ACT
ESD Protection: 4KV DC
Enclosure: Metal case
Installation: Wall mount or DIN rail with optional kit
Power Requirements: BNC Power over Coaxial Input: 44~56V DC
Standards Compliance:
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet Plus(802.3at Type 2)