Speed: 1. Charge the device for 3 hours before first use. 2. Fill the 300ML water tank with warm water. 3. Select the appropriate tip and pressure setting. 4. Lean over the sink and place the tip in your mouth. 5. Turn on the device and maneuver the tip along your gumline and between teeth. 6. After use, remove the tip and rinse the device. 7. Allow the device to air dry with the tip off.
Speed: 1. Fill the water tank with lukewarm water. 2. Attach the desired tip securely. 3. Select the preferred pressure setting or cleaning mode. 4. Lean over the sink, place the tip in your mouth, and turn on the device.5. Guide the tip along the gumline and between teeth, allowing water to clean each area. 6. Empty any remaining water from the tank after use. 7. Rinse the tip thoroughly and store the device in a dry place. NOTE: First-time users should start at lowest pressure setting and gradually increase over time.
Speed: 1. Charge the device. 2. Fill the water tank. 3. Select a cleaning mode. 4. Lean over a sink. 5. Aim the flosser tip at the gumline. 6. Turn on the device.
Speed: For any issues, contact RUMFFLYE’s official after-sales support team—we will resolve all your inquiries.Usage Instructions:1. Fill the 300ml detachable water tank with lukewarm water. 2. Choose one of the 8 DIY modes or 4 professional settings using the one-touch mode switch. 3. Adjust water pressure from 20-120 PSI according to your preference and gum sensitivity. 4. Place the selected tip into the 360° rotating nozzle and turn on the device. 5. Close your mouth slightly and let water flow naturally into the sink to avoid splashes. 6. Maneuver the irrigator tip around your teeth, implants, and braces, ensuring it reaches deep between them. 7. After use, remove the tip and rinse both the tip and the unit with warm water. 8. Allow the unit to air dry completely before storing it. 9. Cha...
Speed: 1. Charge the device fully before first use and every 3 weeks for optimal performance. 2. Fill the 310mL water tank with warm water. 3. Choose from Normal, Soft, Pulse, or Point modes based on your needs. 4. Select the appropriate nozzle for your dental needs. 5. Place the tip in your mouth and adjust the water pressure as needed. 6. Move the tip along your gum line and teeth, pausing briefly on each tooth. 7. After use, remove the tip and rinse it under warm water. 8. Wipe the unit clean and store it with the tip facing up. 9. Avoid using hot water or leaving the unit submerged in water to prevent damage. 10. For a thorough clean, remove the water tank and clean it with warm water and mild soap. Allow all parts to air dry before storing.
Speed: To use the oral irrigator, first fill the 350ml water tank. Then, select one of the four cleaning modes (gentle, normal, DIY, or powerful) using the control buttons. Place the selected nozzle tip into the water tank and position the tip in your mouth. Turn on the device and use the tip to clean your teeth and gums. After use, remove the tip and clean it, then store the device properly. For detailed instructions on adjusting water pressure, cleaning the unit, and precautions, please refer to the user manual.
Speed: 1. Fill the water tank with warm water. 2. Choose the desired mode and adjust water pressure. 3. Lean over the sink and place the tip in your mouth. 4. Close lips around the tip and turn on the device. 5. Move the tip along your teeth and gums, pausing briefly on each tooth. 6. After use, clean the tip and water tank, and store the device properly.
Speed: 1. Fully charge the device. 2. Fill the 350ml water tank. 3. Select one of the 5 cleaning modes. 4. Press the start button. 5. Use the 360-degree rotating nozzle to clean all areas of the mouth, including hard-to-reach areas.
Speed: 1. Charge the device using the USB cable. 2. Fill the 300ML tank with water. 3. Select one of the 5 pressure modes. 4. Place the tip in your mouth and tilt your head back slightly. 5. Turn on the device and maneuver the tip along your teeth and gums. 6. After use, clean the tip and the unit, and store it in the provided pouch. 7. Always follow the safety warnings and precautions.
Speed: 1. Remove the tip from the handle. 2. Fill the water tank with warm water. 3. Reattach the tip to the handle. 4. Adjust the water pressure using the mode selector. 5. Lean over the sink and place the tip in your mouth. 6. Turn on the device and close your lips to form a tight seal. 7. Move the tip along your gum line, pausing briefly on each tooth. 8. After use, remove the tip and rinse both the tip and the handle. 9. Allow the unit to air dry. 10. Store the unit with the tip off and the tank empty.
Speed: 1. Choose the appropriate tip for your needs (classic, tongue scraper, or orthodontic). 2. Fill the 320ml tank with water. 3. Adjust the water pressure to your preference. 4. Use the oral irrigator in the shower or over the sink for effective plaque removal. 5. After use, clean the tips and the unit, and store it properly.
Speed: 1. Remove the water tank and fill it with warm water. 2. Place the selected tip onto the irrigator. 3. Turn on the device and adjust the water pressure using the mode button. 4. Lean over the sink and place the tip into your mouth at a 90-degree angle. 5. Close your mouth slightly and turn on the water flow. 6. Move the tip along your gum line and teeth, pausing briefly on each tooth. 7. After use, remove the tip and rinse it under clean water. 8. Detach the water tank and clean it thoroughly. 9. Always store the device with the water tank detached and the tip removed. 10. Always use the device as instructed and keep it out of reach of children unless supervised. 11. Start with the lowest setting if you're a beginner or have sensitive teeth. 12. Charge using a 5V 1A adapter (adapter ...