Speed: 1. Prepare the oral irrigator by attaching the tip and filling the water tank. 2. Adjust the water pressure to a comfortable setting. 3. Place the tip in your mouth and maneuver it around your teeth and gums to remove plaque and debris. 4. After use, clean the tip and water tank using the included cleaning brush and pry tools to remove any remaining residue. 5. Store the oral irrigator in a dry place to prevent bacterial growth.
Speed: For any issues, contact RUMFFLYE’s official after-sales support team—we will resolve all your inquiries.Usage Instructions:1. Fill the 300ml detachable water tank with lukewarm water. 2. Choose one of the 8 DIY modes or 4 professional settings using the one-touch mode switch. 3. Adjust water pressure from 20-120 PSI according to your preference and gum sensitivity. 4. Place the selected tip into the 360° rotating nozzle and turn on the device. 5. Close your mouth slightly and let water flow naturally into the sink to avoid splashes. 6. Maneuver the irrigator tip around your teeth, implants, and braces, ensuring it reaches deep between them. 7. After use, remove the tip and rinse both the tip and the unit with warm water. 8. Allow the unit to air dry completely before storing it. 9. Cha...
Speed: 1. Charge the device for 3 hours before first use. 2. Fill the 300ml water tank. 3. Select one of the 3 modes (soft, normal, pulse) using the mode button. 4. Insert the desired tip (classic jet, tongue scraping, periodontal, or orthodontic) into the nozzle, ensuring it's fully inserted. 5. Place the tip in your mouth and guide it along your teeth and gums. 6. After use, remove the tip and rinse it under clean water. 7. Store the device with the tips attached to allow for proper air-drying. 8. Avoid using the device while sleeping or in the shower to prevent accidental water ingestion or device damage.
Speed: To use the oral irrigator, first fill the 350ml water tank. Then, select one of the four cleaning modes (gentle, normal, DIY, or powerful) using the control buttons. Place the selected nozzle tip into the water tank and position the tip in your mouth. Turn on the device and use the tip to clean your teeth and gums. After use, remove the tip and clean it, then store the device properly. For detailed instructions on adjusting water pressure, cleaning the unit, and precautions, please refer to the user manual.
Speed: 1. Fully charge the device for 4 hours. 2. Fill the 300ml reservoir with water or mouthwash. 3. Select a mode (Normal, Soft, Pulse, or Power). 4. Aim the irrigator at your gumline and press the button to floss.
Speed: Fill the 300ml tank with water, attach the nozzle securely, and charge the battery. Use one of the 4 modes for water pressure and place the irrigator tip at a 90-degree angle against teeth and gums, starting with the lowest setting. After use, rinse the unit with water, let it dry, and ensure the nozzle covers the sealing rubber ring to prevent water leakage.
Speed: 1. Remove the oral irrigator from its charging base. 2. Fill the water tank with lukewarm water. 3. Select the desired mode (Soft, Pulse, or Strong) using the mode button. 4. Place the tip in your mouth, pointing at a 90-degree angle towards the gum line. 5. Turn on the device using the power button. 6. Move the tip along the gum line, pausing briefly at each tooth. 7. After use, remove the tip and rinse it under clean water. 8. Store the tip in the built-in storage compartment. 9. Place the oral irrigator back on its charging base to recharge.
Speed: 1. Adjust water pressure by pressing and holding the ON/OFF button until the desired strength is reached. 2. Switch between 4 pressure modes (Strong, Normal, Soft, DIY) to suit your needs. 3. Fill the extra-large 300ml tank with water, ensuring the nozzle is fully inserted for leak-free use. 4. For thorough cleaning, remove the tank and rinse it under running water after each use. 5. The IPX7 waterproof rating allows for easy shower cleaning. 6. The 1500mAh battery lasts up to 45 days on a single charge, and the USB-C cable (included) enables fast charging.
Name: Hangsun Portable Wireless Water Flosser for teeth and Brace with Multiple Operation Modes, Multiple Pressure Settings, Multiple Pressure Settings, Multiple Tips, Non-Slip Grip, Lightweight and Gentle, Travel and Home Use
Speed: Read the user manual for detailed instructions on preparing the device, adjusting water pressure, maneuvering the irrigator tip, cleaning the unit after use, and any precautions or tips for optimal results.
Speed: 1. Remove the tip from the handle. 2. Fill the water tank with warm water. 3. Reattach the tip to the handle. 4. Adjust the water pressure using the mode selector. 5. Lean over the sink and place the tip in your mouth. 6. Turn on the device and close your lips to form a tight seal. 7. Move the tip along your gum line, pausing briefly on each tooth. 8. After use, remove the tip and rinse both the tip and the handle. 9. Allow the unit to air dry. 10. Store the unit with the tip off and the tank empty.
Speed: 1. Fill the 300ML water tank with warm water. 2. Choose the desired cleaning mode on the smart LCD screen. 3. Attach the appropriate nozzle for the user. 4. Lean over the sink and aim the nozzle at the gum line. 5. Press the power button and move the nozzle along the gum line and between teeth. 6. After use, clean the nozzle and water tank, and allow the device to fully charge.
Speed: 1. Fill the 300ML water tank with warm water. 2. Choose the desired cleaning mode on the smart LCD screen. 3. Attach the appropriate nozzle for the user. 4. Lean over the sink and aim the nozzle at the gum line. 5. Press the power button and move the nozzle along the gum line and between teeth. 6. After use, clean the nozzle and water tank, and allow the device to fully charge.
Speed: For any issues, contact RUMFFLYE’s official after-sales support team—we will resolve all your inquiries.Usage Instructions:1. Fill the 300ml detachable water tank with lukewarm water. 2. Choose one of the 8 DIY modes or 4 professional settings using the one-touch mode switch. 3. Adjust water pressure from 20-120 PSI according to your preference and gum sensitivity. 4. Place the selected tip into the 360° rotating nozzle and turn on the device. 5. Close your mouth slightly and let water flow naturally into the sink to avoid splashes. 6. Maneuver the irrigator tip around your teeth, implants, and braces, ensuring it reaches deep between them. 7. After use, remove the tip and rinse both the tip and the unit with warm water. 8. Allow the unit to air dry completely before storing it. 9. Cha...
Speed: 1. Fill the water tank with water, 2. Select the desired water pressure level, 3. Lean over the sink, 4. Place the nozzle in your mouth, 5. Turn on the device, and 6. Move the nozzle along your gum line and between your teeth.