Battery Run Time: At 100W load: Approximately 1 hour and 30 minutes
At 300W load: Around 25 minutes
At 600W load: About 10 minutes
At full 900W load: Roughly 4 to 5 minutes
Specification: Pump Compatibility: DDC
Installation Compatibility: 120 or 140 mm fan/radiator
Seal O-Ring: DuPont VITON
Reservoir - ID: 88.62 / W: 1.78
Color: Transparent
RGB LED type: Digital-RGB (addressable)
LED Number: 5050, 12pcs
LED Electricity Spec: 5V/0.45A/2.25W
Capacity: 160ml
Materials: Acrylic body, Acrylic backplate, Steel bracket
Max Water Loop Temperature: 60?
Fill port: 1 x G 1/4
No. of inlet: 3 x G 1/4
No. of outlet: 1 x G 1/4
Package Contents: 1 x PH-R160C_02
3 x Stop Fitting G1/4 (Pre-installed)
1 x D-RGB LED Board (12 Pcs LEDs)
1 x D-RGB LED cable
1 x D-RGB LED motherboard adapter
1 x Reservoir Bracket (2x Pre-installed Rubber Pad)
2 x M4x10mm bracket screws
2 x M4x6mm LED strip screws
4 x M4 x25mm pump screws
4 x fan screws
1 x 3 mm Allen key
1 x User Manual
Specifications: Material: Plastic outer shell
Output limitation (each port):
Addressable RGB port: 72 LED per port, total 5V, 5A
Fan Port : total 12V, 3A
Color Selection: Support 2812 IC Addressable RGB LED
Signal output:
Standard Addressable RGB 3pin + 4-1pin x 6*
Fan 4pin port x 4 (compatible with 3pin)
Included Parts:
6 x Standard Addressable RGB cable
1 x Peripheral power Y cable
1 x RF remote
1 x Thermal sensor cable
1 x Power switch cable
Specifications: Material Plastic Shell
Signal input:
Standard addressable RGB 3Pin +5V, D, G*
Motherboard addressable RGB 4pin +5V, D, NP, G*
Signal output: SilverStone custom addressable RGB 3pin +5V, D, G** x 8
Power Input: SATA 15pin
Output limitation (each port): 5V 9A (4.5A+4.5A)***
Included Parts:
8 x Standard addressable RGB 3pin cable
1 x SATA power cable
1 x Input signal cable
Specifications: Addressable RGB Splitter Hub This splitter hub connects to the 3-pin 5V addressable RGB header or controller on your motherboard, allowing you to add 10 ARGB fans or strips for lighting synchronization via motherboard software. It is compatible with ASUS AURA SYNC, GIGABYTE RGB Fusion, MSI Mystic Light and ASRock RGB LED. An extra Molex power interface ensures stable power delivery for all the ARGB devices. Built-in PMMA case offers solid protection while the included sticky pad makes installation quick and easy. A 1ft RGB extension cable is also included for your convenience.